See what our Experts say about this etrailer Trailer Tongue Lock

• Recommended Hitch Lock And Coupler Lock That Can Be Keyed Alike
  We have exactly what you are looking for. I recommend the etrailer Hitch Receiver and Coupler Lock Set # e99039 which includes a 5/8" diameter lock for a 2" trailer hitch receiver, and a 1/4" diameter lock for the trailer coupler. You can get two of these sets keyed alike by selecting keyed alike from the drop down menu on the product page, and changing the quantity to 2. I included a video of the etrailer # e99039 for you to take a look at.
  view full answer...
• Availability Of a Keyed Alike Hitch and Coupler Lock With a Coupler Latch Lock Wider than 1/2"
  You are going to want the Master Lock Hitch Receiver and Coupler Latch Lock Set # 1481DAT as it has an adjustable coupler lock which fits multiple coupler latch sizes. This like the etrailer Hitch Receiver and Coupler Lock Set # e99039 you found will fit a 2" wide class IV receiver with 5/8" diameter pin. We do also have the etrailer Hitch and Coupler Lock Set # e68ZR which will also include a storage lock to keep your trailer safe when not connected. And finally we have the larger 2-1/2"...
  view full answer...
• Lock Kit Part Number From etrailer Towing Accessories Kit
  To get just the locks out of the etrailer Towing Accessories Kit # e99039-9 you just need the part # e99039. This includes both of the locks from the kit but nothing else.
  view full answer...
• Comparing Reese Weight Distribution System With Equal-i-zer Weight Distribution System
  The Reese Steadi-Flex # RP66558 and the Equal-i-zer # EQ37060ET systems are both very good and will work well with your 2011 Ford F-150 and your 17SD Casita trailer. The major differences are in the tilting design of the head, the trunnion bars, and the friction points. The Equal-i-zer system uses the traditional washer stacking design for the head angle, where the Reese system uses a serrated washer design so no additional washers or stacking is needed. The trunnion bars are shaped...
  view full answer...
• Can I Get Keyed Alike Locks For My Different Hitches and Trigger-Latch Coupler?
  Yes! So you would need the etrailer Hitch Receiver and Coupler Lock Set # e99039 which comes with a 2" hitch pin lock and a 1/2" coupler latch lock. Then you can also get the etrailer 1-1/4" hitch lock # e98879. If you select "Keyed Alike" and they are all in the same purchase order, then we will put keyed alike lock cores into all of them before sending them out. You can also get them separately: etrailer Trailer Coupler Latch Lock1/2" Span - 1/4" Diameter # e98885 etrailer Hitch Receiver...
  view full answer...
• Recommended Weight Distribution System And Suspension Enhancement For 2012 Ram 1500
  For your 2012 Ram 1500, a weight distribution system with sway control will help a great deal. To determine the best system for you, we need to look at the total tongue weight which is the loaded tongue weight of your trailer plus any cargo behind the rear axle of your truck. This total tongue weight will help us find a system that has the actual total tongue weight in the middle of its range for best results. For your application I recommend the Reese Strait-Line Weight Distribution...
  view full answer...
• Trailer Hitch with Best Ground Clearance for 2008 Honda Element EX AWD
  All of the trailer hitches available for your 2008 Honda EX are going to have pretty similar ground clearance measurements but your best option will be with the etrailer # e78KR. The 2 inch receiver on this hitch will pretty much sit right up against the bottom of the rear bumper on your Element (see attached image). This Class III hitch will require drilling for installation and it has a 3,500 pound towing weight capacity and a 350 pound tongue weight limit. I have attached an install...
  view full answer...
  
• Trailer Hitch Recommendation for a 2003 Toyota Tacoma
  The Draw-Tite Class III Max-Frame Trailer Hitch, item # 75091, is designed to fit the 1996 - 2002 Toyota 4Runner All Models, and is not the correct hitch for the 2003 Toyota Tacoma. There are several models available for the 2003 Toyota Tacoma (see link). I would recommend the Curt Trailer Hitch, item # 13013, for your vehicle because of the easy, no drill, installation. Some items you may need with the Class III hitch are listed below. Wiring # 118379 Ball Mount Kit # 989900 Hitch...
  view full answer...
• Will the Curt Hitch # 13328 Fit on a Acura MDX 2004/2005 with Full Size Spare & PDC
  The Curt Class III Trailer Hitch, item # 13328, will fit on both the 2004 and the 2005 models of the Acura MDX. The note about fascia trimming concerns an extra fascia piece that may be installed on some vehicles. If your vehicle rear end looks like the ones in the videos (linked below) no fascia trimming will be needed. The factory sized spare tire will be lowered for installation and reinstalled after installation is complete. I have not seen the park distance control you are referring...
  view full answer...
• Getting Keyed Alike Locksets for Hitch, Coupler and Cable Locks
  Yes, you can get all of the locks you have mentioned keyed alike as long as you order from our Keyed Alike locks page. If you order all the locks you need at the same time they will come keyed alike. If you decide you need another lock keyed the same later you can call our customer service line at 1-800-298-8924 and request a lock, as long as it is on our Keyed Alike locks page, with the same key by giving them the key number you have. When you order please be sure to select keyed alike...
  view full answer...
• Keyed Alike Hitch Receiver and Coupler Lock
  We can accommodate most of what you are asking for with locks that are indeed made in the U.S.A. and are made from chrome-plated steel. You can select keyed alike and will have one key for etrailer Trailer Hitch Receiver & Coupler Lockset - 2" Trailer Hitch Receiver # e99039 and Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879, which will give you the hitch locks and coupler locks keyed alike. For a cable lock you can use, Cable Lock # e98891.
  view full answer...
• Recommended Weight Distribution With Anti-Sway For Lifted 2011 Toyota Tacoma
  The 2015 R Pod 171 Hood River Edition is a fairly light trailer, but with your lifted truck and this combination, I recommend using the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600 system. The Anti-sway and weight distribution of this system will allow you to do your mountain camping without issue. You will need the 2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs # EQ91-00-6080 for this application as...
  view full answer...
• Can the TowSmart Trailer Coupler Lock Kit Be Keyed Alike
  I do have options for you but the TowSmart Trailer Coupler Lock Kit part # TS84FR does not have a keyed alike option. The etrailer Hitch Receiver and Coupler Lock Set part # e99039 is a similar kit minus the surround coupler lock which does have a keyed alike option. I have attached all our keyed alike options below as well.
  view full answer...
• Recommended Hitch Lock Set That Can Be Ordered Keyed Alike
  The Master Lock Hitch Receiver and Coupler Latch Lock Set # 2848DAT is not available keyed alike, but we do have a 2-lock option from etrailer that can be keyed alike in multiples, part # e99039. This lock kit consists of a 5/8-inch diameter hitch lock for 2 x 2-inch receivers and a 1/4-inch diameter coupler latch lock. You can order multiple sets of this lock kit that are keyed alike by selecting that option from the menu bar above the add-to-cart button. No individual replacement parts...
  view full answer...
• Recommended Weight Distribution System For Grand Design Imagine 2950RL Trailer
  For your 2016 Ford F-150, I recommend the Reese Strait-Line Weight Distribution w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW # RP66074. This system has a total tongue weight range of 600-1200 lbs. The total tongue weight is the loaded tongue weight of your trailer along with any cargo behind the rear axle of your truck. The Reese Straight-Line uses hot rolled spring trunnion bars along with cams to keep your trailer straight. This is the only system that actually actively...
  view full answer...
• Can a High/Low Adapter be Used with a Hitch Extender for Flat Towing
  I do have a solution for you, but using an extender with a high-low adapter would be using 2 adapters and is not advisable. Hitch extenders reduce the weight rating of your hitch by 50% and will also cause more movement not to mention the torque that will be on both adapters when you are making a turn. Instead what you can do is swap out your current hitch mount tow bar, like the Blue Ox Alpha # BX7380 for a coupler mount tow bar like the Blue Ox Acclaim # BX4330. This allows you to then...
  view full answer...
  
• Trailer Hitch Size on a 2002 Chevy Silverado
  If you have the factory hitch installed on your vehicle, then it is the 2 inch by 2 inch receiver hitch. If it is an aftermarket hitch on your vehicle then it is most likely a 2 inch receiver hitch. You will need to measure the inside width of the opening on the hitch where the receiver slides in. The measurement should be apparent when you use a ruler or tape measure. Below, links are posted to our 1-1/4 and 2 inch hitch pins and instructions for measuring your hitch.
  view full answer...
• Are There Keyed Alike Trailer Coupler Locking Pin Sets Available
  Hey Dave, We offer hitch pin and coupler latch pin kits with part # e99039 that you could have keyed alike but they don't come with the a lock for the coupler itself. We do offer the BOLT Locks brand which keys to your vehicle key so that you only have to carry one key. I would just need to know the year/make/model of your vehicle to determine which coupler lock # BL7032491, coupler latch lock # BL7025285, and hitch pin lock # BL7018447 you'll need.
  view full answer...
• Coupler Lock, Pin Lock, and Hitch Pin Lock for Underslung Coupler
  We have a coupler lock that fits underslung couplers with the Atwood AMPlock part # AMP56FR but we don't have a matching kit that includes a hitch pin lock and coupler latch lock all with the same key. Then for a matching pin lock and hitch pin lock you could use the part # e99039.
  view full answer...
• Recommended Class III Trailer Hitch Receiver For A 1999 Toyota RAV4
  For your 1999 Toyota RAV4, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13524 is a confirmed fit and is a great hitch that is easy to install and has a nice sturdy square tube design. The rated towing capacity of the hitch is far above your vehicle's rated towing capacity as you stated, but you will be much happier with a Class III hitch. The class 1 hitch will greatly reduce your ability to use accessories and will significantly reduce options for even a ball mount....
  view full answer...
• Keyed Alike DeadBolt Trailer Hitch Receiver & Coupler Lockset # 7685 Recommendation
  You would want to get a etrailer Trailer Hitch Receiver & Coupler Lockset # e99039. You can select keyed alike from the drop down menu on the product page and then enter the quantity you would like. At this time the time the Master Lock Hitch Receiver and Coupler Latch Lock Set # 1481DAT is not offered keyed alike.
  view full answer...
• Availability of Keyed-Alike Hitch and Coupler Lock Sets
  We offer keyed-alike lock sets like the DeadBolt # e99039 that include both a 1/4-inch diameter trigger-style coupler latch lock and a 5/8-inch diameter hitch lock (for 2-inch hitches). This kit can be ordered keyed-alike in whatever quantity you require. Master Lock kit # 1481DAT is not offered keyed alike. Simply select Keyed Alike from the drop down menu tool and indicate your quantity of 4 in the field provided.
  view full answer...
• Can Two Different etrailer Lock Products Be Ordered Keyed-Alike
  Yes, you can order multiples of two different etrailer locks, 3 of Hitch Receiver Lock # e98882 and 1 of Hitch Receiver Lock Set # e99039, all keyed alike. To do this you need to select the Keyed Alike option on both product pages along with the appropriate quantities for each part. When your order is processed here at etrailer we will install keyed-alike lock cylinders in all four products.
  view full answer...
• Is Bumper Fascia Cutting Required for Installation of the Curt Hitch #13251On a Jeep Grand Cherokee
  If you are installing the Curt Class III Trailer Hitch, item # 13251, on a 2005 to 2010 Jeep Grand Cherokee (except SRT8), there will be no cutting of the fascia required to install the hitch. If your vehicle has any aftermarket parts, then that will need to be determined at the time of installation. Some items you may need with the Class III hitch are listed below. Drawbar # C45010 Hitch Ball # 19260 or # 19247 Hitch Lock Kit # e99039
  view full answer...