Spindle Grease Seal Sleeve For 3,500LB Trailer Axles
Updated 08/25/2022 | Published 08/24/2022
Products Featured in This Question
Question:
Do u stock Dexter type spindle wear ring/sleeve for ez lube type spindle? I’ve searched the site and do not see said product.
asked by: Mike
Expert Reply:
We carry the Bearing Buddy Spindle Grease Seal Set # BB60002 instead of the Dexter sleeve. I do not recommend the Dexter as with the one hole if that sleeve were to spin on the shaft it would block the hole of the EZ lube grease zerk. With the Bearing Buddy kit above you will have to use their Bearing Protectors # BB1980A-SS to grease your bearings but you will have the neoprene seal which is superior to the rubber seals used on typical grease seals. You may need to remove your grease zerk on the end of your spindle for the bearing buddy to install properly.
Product Page this Question was Asked From
Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.88 Inch I.D.
- 2.56 Inch O.D.
- Bearing Buddy
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: trailer brakes
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Replacement Hub for TDE Hub 46210 of Boat Trailer
- Q&A: Availability Of 1.251" ID Spindle Wear Sleeves
- Search Results: wear sleeve
- Search Results: spindle wear sleeve
- Search Results: spindle wear ring
- Search Results: ez lube 3500 axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Shackles on Leaf Springs Rubbing Frame of Trailer
- Q&A: Troubleshooting Tandem Axle Trailer Leaf Springs Hitting Trailer Frame at Equalizers
- Shop: Spare Tire Cover
- Search Results: spare tire covers
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Video: Demco Master Cylinder Adapter for Power Bleeder Feature Review
- Q&A: Bearing Buddy Recommendation for Hub with Bearing Number L68149
- Q&A: Replacement Bearings and Seal for Trailer with LM29749 and L44610 Bearings
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Triple Lip Grease Seal Kit - DX49CR