Recommended Seal For Bearing Buddy Protectors

Published 11/20/2017

Products Featured in This Question

Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel - Qty 2

(1714)

$38.45

Grease Seal - Double Lip - I.D. 1.249" / O.D. 1.983" - 2,000-lb to 2,200-lb Axles - Qty 1

(713)

$5.88

Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy

(419)

$23.60

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2230)

$24.93

Question:

got a digital caliper and took some measurements. see pictures.

asked by: Mark

Expert Reply:

The Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) # BB1980A-SS are designed for that blue seal to expand and eventually have visible grease around that edge. I've attached a video that shows this installation and grease application for you. The grease needing to be applied almost every trip is not normal, so I recommend the Spindle Grease Seal Set # BB60002 to contain your grease with a tight seal intended for this application.

expert reply by: Jason S

Mark

11/20/2017

got a digital caliper and took some measurements. see pictures.

Jason S.

11/20/2017

Based on the spindle measurements you will want the following combinations: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless # BB1980A-SS along with Bearings # L44649. The part that we cannot fit is the seal. You need a seal with a 1.22 inch inner diameter. That is not a common seal. The closest we get is the 1.249 inch inner diameter of the double lip # 34823. This seal could leak or may be okay. The pressure of the spring loaded bearing buddy may cause it to fail sooner than a standard grease cap. This seal has an outer diameter of 1.983, so this is really a close fit, but I can't promise it won't still have issue and you may want to seek a smaller seal.