See what our Experts say about this Yakima Roof Rack

• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Can 78" Yakima HD Bars for 2018 Ford F-150 BedRock be Cut for Custom Length
  The Yakima BedRock HD Truck Bed Rack # Y01160-59 with the 78" crossbars is what Yakima test fit for your 2018 Ford F-150 and since the next size down is 10" less with the 68" HD Bars # Y01158 I am a little skeptical that the system would work. I reached out to my contact at Yakima who also had hesitations about the 68" bars fitting and they also said that ultimately you can cut the HD bars if you really want to but they don't really recommend doing that because you won't be able to fit...
  view full answer...
  
• Will the Malone BigFoot Pro Canoe Roof Rack w/ Tie-Downs Fit the Yakima Overhaul HD Crossbars?
  Hello Steven, Yes, you can use the Malone BigFoot Pro Canoe Roof Rack w/ Tie-Downs - Gunwale Brackets - Clamp On # MPG112MD on the Yakima HD Crossbars - Aluminum - Black - 68" Long - Qty 2 # Y01158. The Yakima Overhaul HD Bars are 3" wide x 1-1/2" tall, and the Malone BigFoot Pro Canoe Roof Rack works on bars that are up to 3 1/2" wide and 1 1/2" tall. What kind of canoe are you hauling?
  view full answer...
• Replacement EndCap for Yakima HD Crossbars
  Hey Randy, welcome back. The Replacement EndCap for Yakima HD Crossbars item # YA54FR is the only option available. They don't make other short endcaps for the Yakima HD Crossbars like item # Y01158. What do you use your roof rack for? You can add this information, along with any other questions you have, where it says Add Comment.
  view full answer...
• Does The Length of the Yakima HD Crossbars Include The End Caps?
  The 60" Yakima HD Crossbars # Y01157 are going to be 60" from end to end including the caps. As you need 60" of T-slot you would need to step up to the 68" Crossbars # Y01158.
  view full answer...
• Replacement Top Channel Crossbar Infill for Yakima HD Crossbars
  Hey Randy, welcome back. To replace the infill covers on your Yakima HD Crossbars item # Y01158 you will need the Replacement Top Channel Crossbar Infill item # Y33KV. If you have any additional questions, go ahead and click on the box below that says Reply to Jerred H and I'll be happy to answer them.
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• 68 inch Crossbar Roof Rack Recommendation for 2025 Subaru Forester with Raised Rails
  Hey Tim, for a 68 inch crossbar roof rack that fits your 2025 Subaru Forester you would need the Yakima HD crossbars part # Y01158 and the Yakima Timberline feet part # Y33TR and you'd be set.
  view full answer...
• Availability Of Single 68" Yakima HD Crossbar
  Hello Arie; yes, we do! Take a look at the following: - Yakima HD Crossbar - Aluminum - 68" Long - Qty 1 # Y95FR
  view full answer...
• Will Malone T-Slot Adapter Kit Fit on Yakima HD Crossbars
  Thanks for reaching out, Darryl! I believe you're talking about the Yakima HD Crossbars, like the 68" # Y01158. If this is the case then yes, the Aero Style Crossbar T-Slot Fit Kit for Malone Kayak and Surfboard Carriers # MPG915 is compatible with this crossbar style. If you have a different crossbar system please let me know and I'll be happy to help you look into this further.
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Replacement Top Channel Infill For Yakima HD 68" Crossbars
  The Replacement Top Channel Crossbar Infill for Yakima HD Style Crossbars # Y33KV is the Yakima 8881036 and the correct insert for your Yakima HD Crossbars # Y01158. The Replacement Top Infill # Y01166 is the Yakima part number 8001166 which fits both the HD bars and JetStream crossbars. The # Y01166 is 76" long to fit the longest JetStream while the # Y33KV is 74-13/16" long fitting up to the 78" HD Bars # Y01159.
  view full answer...
• Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
  view full answer...
• What High-Capacity Kayak Carrier Fits Yakima HD Crossbars?
  You are definitely correct that the Yakima JayLow # Y04073 has a weight capacity of 80 pounds. For your 95-pound kayak, we need to pull out the heavy artillery. For a great kayak carrier that can mount to Yakima HD Crossbars like the # Y01158, I recommend the Yakima BigCatch # Y04091. I confirmed with my tech at Yakima that the clamps on this carrier definitely fit the HD crossbars. The BigCatch comes with a massive 150-pound weight capacity. Since the carrier is a saddle-style design,...
  view full answer...
• Yakima HD Cross Bars T-Slot Dimensions
  The T-slot channel dimensions for the Yakima HD Crossbars # Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as well as a video with our review on the crossbars!
  view full answer...
  
• Recommended Crossbar Size for Yakima Overhaul HD on 2019 Ram 2500
  You really could use either one of the 68" # Y01158 or 78" # Y01159 bars, but I have a feeling that the 78" bars are going to stick out a little bit too far, so I do recommend going with the 68" Yakima HD Bars # Y01158. Obviously having longer bars means more space, but the usable space outside of the bars really isn't all that beneficial since it's not going to be able to bear heavier loads. The only time I would recommend going with longer bars in this case is if you were using an awning...
  view full answer...
• Can Longer Crossbars Be Used On A Yakima OverHaul HD Ladder Rack On A 2023 Toyota Tacoma
  Yakima lists that the minimum crossbar size required for the 2023 Toyota Tacoma as 60". We typically just list the requirements and not every single fit that could work when it comes to just the crossbar size. The larger 68" crossbars # Y01158 would still work with the OverHaul towers on your 2023 Toyota Tacoma.
  view full answer...
• Can Yakima JayLow Kayak Carrier be Installed on Yakima HD Bars Using T-Slot
  The Yakima JayLow Kayak Carrier w/ Tie-Downs # Y04073 doesn't have a T-Slot adapter but they do fit crossbars with max dimensions of 3-1/2" x 1-11/16". Since the Yakima HD Crossbars like the 68" # Y01158 only measure 3" wide x 1-1/2" tall you will be able to use the clamping system that comes with the JayLow to mount them to this size crossbar. If you're wanting a way to secure them a little bit more to help deter theft then I recommend adding the 2-pack lock core set # Y07202. If you're...
  view full answer...
• What are the T-Slot Dimensions of Yakima HD Crossbars and Rhino-Rack Aero Crossbars?
  If you are looking for crossbars that can accommodate the 12mm T-slots, the closest confirmed top channels we have are Yakima crossbars like the Yakima HD Crossbars - Aluminum - Black - 68" # Y01158 or Rhino-Rack crossbars like the Rhino-Rack Vortex Aero crossbars # RRVA126B-2. Both of these brands use crossbars with 7/16" (11.1mm) top channel openings. I went ahead and attached diagrams that outline the dimensions of these two examples. If you have a particular accessory that you need...
  view full answer...
  
• Will Yakima Baseline Towers Work with Thule ProBar Evo Crossbars
  I do have an option for you but the Thule ProBar Evo Crossbars like part # TH713600 are not compatible with the Yakima Baseline Towers. In order to use the Thule ProBar Evo Crossbars you'll need the Evo Clamp Feet for Thule Crossbars part # TH710501 and subsequent vehicle specific fit kit. The other option would be to simply use the Yakima HD Crossbars like part # Y01158. I have attached a full list of sizes below for this crossbar. The channel dimensions which the crossbars mount to are...
  view full answer...
• Does Thule Hullavator Fit Yakima HD Crossbars Using T-Slots
  Yes, you can absolutely mount your Thule Hullavator Pro Kayak Carrier # TH898 into the T-slot channels of the Yakima HD crossbars. The HD crossbars are available in the following sizes: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159
  view full answer...
• Correct Size Yakima HD Crossbar for a 2016 Ford F-150
  The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
  view full answer...
• What Size Channel Do Yakima Y01166 Top Infill Strips for HD Crossbars Fit Into?
  The Yakima # Y01166 Replacement Top Infill Strips are designed for the T-slots used on Yakima HD crossbars like # Y01158. The strips are meant to fit into a 11mm wide channel that widens to 22mm, as shown in the provided diagram. If you'd care to reply with the width of the T-slots on your factory crossbars, I can look for other fits if these won't work for you.
  view full answer...
  
• Parts Needed to Use Yakima HD Crossbars w/ Retrax XR Pro Tonneau Cover w/ T Slots
  Yes, the Yakima HD 68” crossbars 68” Item # Y01158 will work with your F-150. Yours are the same length as the ladder racks that fit your truck. The only way to mount Yakima HD crossbars to the slots of a Retrax Pro Tonneau cover like item # RTX32SR is to use the Yakima OutPost HD Overland Truck Bed Rack Uprights item # Y01152 and the Tonneau Cover Adapter Kit item # Y01155. There's no feet kit for tonneau covers that are compatible with HD crossbars. These uprights are 13" tall and...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• Availability of Roof Rack That Fits 2 Old Town Sportsman Autopilot 120 Fishing Kayaks
  Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either. If the total weight of your kayaks is 304 lbs...
  view full answer...
• Recommended Ladder Rack And Roof Rack Combo For A 2024 Ford Maverick Hauling Ladders And Canoes
  Hey Rueben, Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails. To add on an additional crossbar to the roof of your Maverick you would need the following components: BaseClip Fit Kit # Y06180 BaseLine Towers # Y62TR HD Bar SL Adapter # Y03541 Yakima...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super Duty
  We can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
  view full answer...
• Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• What Yakima Pads and Clamps do I Need for My 2019 Ford F-250 to Use My Baseline Feet?
  Hello Michael, I am glad you wrote in, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y27FR that you were looking at is for a Ford F-150. For your 2019 Ford F-250 (vehicle that was put into the fit guide) you will want to order (2) sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185. How did end up with the feet and no pads, did you take them off of an old vehicle? What do you plan on using your roof rack for?
  view full answer...
• Which Size Crossbars for Thule Hullavator Pro on 2026 Ford F-350
  Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following: -BaseLine Towers for Yakima Crossbars # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 -Yakima JetStream Crossbars...
  view full answer...
• Can I Reuse Yakima Q Towers for 2021 Ford F-250
  In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250. If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185.
  view full answer...
• Solution for Carrying Multiple Bikes on Roof of 2021 Ford F250
  We absolutely have roof rack options for your 2021 Ford F250. Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts: • Yakima 70 inch CoreBar crossbars, part # Y00423 • Yakima BaseLine Towers, part # Y28TR • Yakima Vehicle-Specific fit kit, part # Y06185 With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really...
  view full answer...
• Roof Rack Fit for 2016 Hyundai Elantra GT With Panoramic Sunroof
  I checked for you and there is a fit for a roof rack for your 2016 Hyundai Elantra GT with the panoramic glass roof (moonroof), which is from Yakima. I verified the fit with the manufacturer and roof rack consists of the following parts: - Yakima JetStream Crossbars # Y00425 Black - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06151 - BaseClip Fit Kit # Y06185 - Same Key System Lock Cores (Optional) # Y07204 This is going to give your '16 Elantra GT an easy to use,...
  view full answer...
• Can Two Thule Hullavator Kayak Carriers Be Used On A Thule TracRac SR Ladder Rack
  Yes, you can use two of the Thule Hullavator Pro Kayak Roof Rack and Lift Assist # TH898 on the Thule TracRac SR. It has plenty of capacity and space for both to fit, you'll just need to place the towers so that the crossbars are spaced 24" apart. For your 2022 Ford F-250 with a 6-3/4' bed you'll need part # TH43003XT-785 for the TracRac. The Thule Hullavator requires that the roof of the vehicle can hold at least 130lbs, but you'll be splitting this with the ladder rack. I'd just check...
  view full answer...
• Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew Cab
  We have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
  view full answer...
• Recommended Yakima Roof Rack for a 2024 Ford F-250 Crew Cab
  To add a Yakima roof rack to your 2024 Ford F-250 Crew Cab you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06185
  view full answer...
• Roof Rack Recommendatio nfor 2018 Ford F-250 Crew Cab that is Leased
  For your 2018 Ford F-250 Crew Cab the Yakima Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 would be a great solution as it is a confirmed fit and the fact that it does not permanently modify the roof of the vehicle it is installed on. So you'd be able to take the roof off when it's time to return the lease and no one would know the difference. The aero shape of these bars also helps cut down on wind noise which is a nice feature as well. I attached an install video for thist...
  view full answer...
  
• Is There a Solution for a Roof Rack on My 2021 Ford F-250 that Doesnt Require Drilling?
  I have a great no-drilling solution for you. While the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B requires drilling, there are options for your 2021 Ford F-250 Super Duty crew cab that do not require any drilling. To go this route, you will need the following parts: - Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima...
  view full answer...
• Buying a Single Yakima HD Crossbar for a 2020 Ford F-250
  While we do not have a full kit for just one crossbar for your 2020 Ford F-250, I have compiled a list of the individual part numbers that make up the Yakima HD crossbars that are compatible with the SuperCab and CrewCab. For the crossbar itself, use part # Y95FR. It's the single bar, 60" long like the full kit. For the BaseLine Towers, use part # Y62TR. There are 2 in this kit. For the HD Bar SL Adapter, use part # Y03541. This, unfortunately, does not come in a quantity of 2, so you'll...
  view full answer...
• Half Roof Rack and Ladder Rack that Fits 2023 Ford F-350
  To do a half roof rack for the roof of your 2023 Ford F-350 you'd need the following: Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06185 There isn't a way to do a half ladder rack so best option would be an adjustable height rack like the Yakima Overhaul # Y01151-5855 so that you can have it match the height of your roof rack and if needed you could leave off the rear (or front)...
  view full answer...
• Availability of Yakima JetStream Roof Rack With 70" Bars for 2026 Ford F-350 Crew Cab
  Hey Tom! We don't have a kit but we can put one together here. For a complete rack you will need the following: -BaseLine Towers for Yakima Crossbars # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 -Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 Are you still thinking about adding the MOS UpLift or are you going to go a different route with your setup?
  view full answer...
• Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4
  Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
  view full answer...
• Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew Cab
  While there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
  view full answer...
• How To Transfer Crossbars From a 2019 Ford F-350 to a Leer 100RC Topper
  The track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs...
  view full answer...
• Adding A Roof Rack To A 2020 Ford F-350 Crew Cab For Additional Cargo Carrying Capacity
  Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500lbs - 68" Crossbars # Y01151-58 has an on-road capacity of 500lbs, off-road capacity of 300lbs, and static capacity of 800lbs. The correct roof rack for your 2020 Ford F-350 Super Duty Roof Rack by Yakima would be the following parts: Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y01157. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR. HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Parts Needed to Install Yakima JetStream Crossbars on 2021 Ford F-250
  To install 60 inch Yakima JetStream # Y00427 aero-style crossbars on your Ford F-250, you'll need the # Y28TR BaseLine towers and the # Y06185 vehicle-specific fit kit.
  view full answer...
• Correct Yakima Roof Rack For 2018 Ford F-250 Crew Cab
  Okay, we can get your 2018 Ford F-250 Crew Cab set up with the right Yakima roof rack, and let's start with your first question about the correct length bars. That is determined by the manufacturer when they test fit roof racks, which is how we know the correct length of crossbar for your truck are the 70 inch long bars. In regards to a disadvantage with the clips/clamp-on versus drilled on racks, there is no disadvantage at all. Really, the only reason someone might use a rack that that...
  view full answer...
• Yakima BaseClips Y06185 Needed
  You need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06185.
  view full answer...
• Are Yakima Jetstream Roof Rack Instructions for 2023 Ford F-350 Same as 2024 Models
  The Yakima JetStream roof rack part numbers # Y00426, # Y28TR, # Y06185 that fits the 2024 Ford F-350 crew cab is the same as the 2023 models so the instructions are the exact same. So Jack, what that means is that the instructions were printed when the 23' model was the newest but it's definitely the same as the 24' models.
  view full answer...
• Roof Rack for 2020 Ford F-350 Super Duty to Carry Bike Racks
  For a roof rack for your 2020 Ford F-350 Super Duty that would allow you to carry a lot of bikes you'd want to go with a rack that has a longer crossbar like our Yakima Jetstream Rack # Y00426, # Y28TR, and # Y06185 which is 60 inches long. Then you could use a roof bike rack like the Yakima HighRoad part # Y02114 which allows you to keep the front wheel installed on the bike. Space-wise you wouldn't be limited on how many bikes you could carry as most likely you'd run out of roof capacity...
  view full answer...
• Recommended Roof Rack and Bike Rack for 2019 Ford F-350 Crew Cab
  We have everything you need to secure your bikes on the roof of your 2019 Ford F-350 Crew Cab. Starting with the roof rack I recommend the Yakima JetStream System. This consists of Black # Y00426 aluminum JetStream Crossbars, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06185. This will provide you with a really sleek, aerodynamic system for a quiet ride and better fuel efficiency when compared to round or square bar racks. I have attached a short video demonstration that...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• What Yakima Pads and Clamps do I Need for My 2019 Ford F-250 to Use My Baseline Feet?
  Hello Michael, I am glad you wrote in, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y27FR that you were looking at is for a Ford F-150. For your 2019 Ford F-250 (vehicle that was put into the fit guide) you will want to order (2) sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185. How did end up with the feet and no pads, did you take them off of an old vehicle? What do you plan on using your roof rack for?
  view full answer...
• Which Size Crossbars for Thule Hullavator Pro on 2026 Ford F-350
  Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following: -BaseLine Towers for Yakima Crossbars # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 -Yakima JetStream Crossbars...
  view full answer...
• Can I Reuse Yakima Q Towers for 2021 Ford F-250
  In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250. If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185.
  view full answer...
• Solution for Carrying Multiple Bikes on Roof of 2021 Ford F250
  We absolutely have roof rack options for your 2021 Ford F250. Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts: • Yakima 70 inch CoreBar crossbars, part # Y00423 • Yakima BaseLine Towers, part # Y28TR • Yakima Vehicle-Specific fit kit, part # Y06185 With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really...
  view full answer...
• Roof Rack Fit for 2016 Hyundai Elantra GT With Panoramic Sunroof
  I checked for you and there is a fit for a roof rack for your 2016 Hyundai Elantra GT with the panoramic glass roof (moonroof), which is from Yakima. I verified the fit with the manufacturer and roof rack consists of the following parts: - Yakima JetStream Crossbars # Y00425 Black - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06151 - BaseClip Fit Kit # Y06185 - Same Key System Lock Cores (Optional) # Y07204 This is going to give your '16 Elantra GT an easy to use,...
  view full answer...
• Can Two Thule Hullavator Kayak Carriers Be Used On A Thule TracRac SR Ladder Rack
  Yes, you can use two of the Thule Hullavator Pro Kayak Roof Rack and Lift Assist # TH898 on the Thule TracRac SR. It has plenty of capacity and space for both to fit, you'll just need to place the towers so that the crossbars are spaced 24" apart. For your 2022 Ford F-250 with a 6-3/4' bed you'll need part # TH43003XT-785 for the TracRac. The Thule Hullavator requires that the roof of the vehicle can hold at least 130lbs, but you'll be splitting this with the ladder rack. I'd just check...
  view full answer...
• Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew Cab
  We have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
  view full answer...
• Recommended Yakima Roof Rack for a 2024 Ford F-250 Crew Cab
  To add a Yakima roof rack to your 2024 Ford F-250 Crew Cab you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06185
  view full answer...
• Roof Rack Recommendatio nfor 2018 Ford F-250 Crew Cab that is Leased
  For your 2018 Ford F-250 Crew Cab the Yakima Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 would be a great solution as it is a confirmed fit and the fact that it does not permanently modify the roof of the vehicle it is installed on. So you'd be able to take the roof off when it's time to return the lease and no one would know the difference. The aero shape of these bars also helps cut down on wind noise which is a nice feature as well. I attached an install video for thist...
  view full answer...
  
• Is There a Solution for a Roof Rack on My 2021 Ford F-250 that Doesnt Require Drilling?
  I have a great no-drilling solution for you. While the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B requires drilling, there are options for your 2021 Ford F-250 Super Duty crew cab that do not require any drilling. To go this route, you will need the following parts: - Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima...
  view full answer...
• Buying a Single Yakima HD Crossbar for a 2020 Ford F-250
  While we do not have a full kit for just one crossbar for your 2020 Ford F-250, I have compiled a list of the individual part numbers that make up the Yakima HD crossbars that are compatible with the SuperCab and CrewCab. For the crossbar itself, use part # Y95FR. It's the single bar, 60" long like the full kit. For the BaseLine Towers, use part # Y62TR. There are 2 in this kit. For the HD Bar SL Adapter, use part # Y03541. This, unfortunately, does not come in a quantity of 2, so you'll...
  view full answer...
• Half Roof Rack and Ladder Rack that Fits 2023 Ford F-350
  To do a half roof rack for the roof of your 2023 Ford F-350 you'd need the following: Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06185 There isn't a way to do a half ladder rack so best option would be an adjustable height rack like the Yakima Overhaul # Y01151-5855 so that you can have it match the height of your roof rack and if needed you could leave off the rear (or front)...
  view full answer...
• Availability of Yakima JetStream Roof Rack With 70" Bars for 2026 Ford F-350 Crew Cab
  Hey Tom! We don't have a kit but we can put one together here. For a complete rack you will need the following: -BaseLine Towers for Yakima Crossbars # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 -Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 Are you still thinking about adding the MOS UpLift or are you going to go a different route with your setup?
  view full answer...
• Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4
  Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
  view full answer...
• Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew Cab
  While there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
  view full answer...
• How To Transfer Crossbars From a 2019 Ford F-350 to a Leer 100RC Topper
  The track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs...
  view full answer...
• Adding A Roof Rack To A 2020 Ford F-350 Crew Cab For Additional Cargo Carrying Capacity
  Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500lbs - 68" Crossbars # Y01151-58 has an on-road capacity of 500lbs, off-road capacity of 300lbs, and static capacity of 800lbs. The correct roof rack for your 2020 Ford F-350 Super Duty Roof Rack by Yakima would be the following parts: Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y01157. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR. HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Parts Needed to Install Yakima JetStream Crossbars on 2021 Ford F-250
  To install 60 inch Yakima JetStream # Y00427 aero-style crossbars on your Ford F-250, you'll need the # Y28TR BaseLine towers and the # Y06185 vehicle-specific fit kit.
  view full answer...
• Correct Yakima Roof Rack For 2018 Ford F-250 Crew Cab
  Okay, we can get your 2018 Ford F-250 Crew Cab set up with the right Yakima roof rack, and let's start with your first question about the correct length bars. That is determined by the manufacturer when they test fit roof racks, which is how we know the correct length of crossbar for your truck are the 70 inch long bars. In regards to a disadvantage with the clips/clamp-on versus drilled on racks, there is no disadvantage at all. Really, the only reason someone might use a rack that that...
  view full answer...
• Yakima BaseClips Y06185 Needed
  You need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06185.
  view full answer...
• Are Yakima Jetstream Roof Rack Instructions for 2023 Ford F-350 Same as 2024 Models
  The Yakima JetStream roof rack part numbers # Y00426, # Y28TR, # Y06185 that fits the 2024 Ford F-350 crew cab is the same as the 2023 models so the instructions are the exact same. So Jack, what that means is that the instructions were printed when the 23' model was the newest but it's definitely the same as the 24' models.
  view full answer...
• Roof Rack for 2020 Ford F-350 Super Duty to Carry Bike Racks
  For a roof rack for your 2020 Ford F-350 Super Duty that would allow you to carry a lot of bikes you'd want to go with a rack that has a longer crossbar like our Yakima Jetstream Rack # Y00426, # Y28TR, and # Y06185 which is 60 inches long. Then you could use a roof bike rack like the Yakima HighRoad part # Y02114 which allows you to keep the front wheel installed on the bike. Space-wise you wouldn't be limited on how many bikes you could carry as most likely you'd run out of roof capacity...
  view full answer...
• Recommended Roof Rack and Bike Rack for 2019 Ford F-350 Crew Cab
  We have everything you need to secure your bikes on the roof of your 2019 Ford F-350 Crew Cab. Starting with the roof rack I recommend the Yakima JetStream System. This consists of Black # Y00426 aluminum JetStream Crossbars, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06185. This will provide you with a really sleek, aerodynamic system for a quiet ride and better fuel efficiency when compared to round or square bar racks. I have attached a short video demonstration that...
  view full answer...

Do you have a question about this Roof Rack?