See what our Experts say about this Yakima Roof Rack

• Can Thule WingBar Evo Crossbar Fit On Yakima SkyLine Towers
  The Replacement Adapter and Seat # 8880637 is designed for Yakima JetStream bars but we do have a review showing them being used with Thule WingBars so it does look like they will physically fit together. With that being said, I recommend sticking with Yakima products just because if you do happen to experience any faults with the system (which there shouldn't be any) it would be a lot easier to work with Yakima or Thule if you can show that you're using the product as intended and you...
  view full answer...
  
• Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails
  To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Recommended Roof Rack for a 2024 Honda CR-V w/ Flush Rails
  Yes, we do have the parts you will need and congrats on the new vehicle. To add a roof rack to the flush rails on your 2024 Honda CR-V you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity....
  view full answer...
• Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails
  Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
  view full answer...
  
• Yakima Roof Rack Fit For 2024 Subaru Outback Wilderness
  Sure can; I checked with Yakima and the correct parts for a Yakima roof rack on your 2024 Subaru Outback Wilderness are the following: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - TimberLine Towers for Yakima Crossbars # Y33TR I also recommend protecting your investment by adding locks to secure the rack; you can do this with the Yakima Same Key System (SKS) Lock Cores # Y07204.
  view full answer...
• Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers?
  The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
  view full answer...
• What Roof Rack and Cargo Box For My 2020 Jeep Grand Cherokee?
  For your 2020 Jeep Grand Cherokee with black/chrome flush factory rails, I recommend installing the reliable Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 # Y00428. In order to install these, you will also need Towers # Y53TR and Landing Pads # Y00244. The weight capacity is 165lbs, but you will want to verify that your vehicle roof can handle that much weight (owner's manual). As far as the cargo box, you will be able to accommodate the largest size we offer and still...
  view full answer...
  
• Will the Yakima SkyBox 21 Fit a 2014 Subaru Outback Wagon
  Yes, the Yakima SkyBox 21 Rooftop Cargo Box # Y07337 will fit your Outback as long as you have round, square, aero, elliptical, or factory crossbars. If you don't have any bars, you'd just need to add a set like the Yakima JetStream Crossbars # Y00428 with the TimberLine Towers for Yakima Crossbars # Y33TR and you'd be good to go.
  view full answer...
• Is The Malone FoldAway Carrier Compatible With Subaru Outback Factory Crossbars
  From what I can find in the online owner's manual Subaru just doesn't want you exceeding 150lbs with the factory crossbars, which is same capacity for the Malone FoldAway-5 Kayak, Canoe, and SUP Roof Rack # MAL38FR that you were looking at. They aren't really descriptive with the shape or dimensions of the factory crossbars so you'll want to ensure that they fall within the requirements of the # MAL38FR, which I have pictured below. If your crossbars fall outside of these requirements...
  view full answer...
  
• Solution for Needing to Mount Thule ProRide XT Bike Rack on Yakima Corebars
  If the clamp brackets of the Thule Pro Ride XT part # TH598004 will not fit around your Core bars you'd have to replace them with Jetstream bars like the part # Y00425 for black or # Y00428 for silver. Thule does not offer any adapter solutions for this bike rack. Yes it is okay to lubricate the arm of the rack as well.
  view full answer...
• How to Determine Correct Roof Rack For 2024 Kia Telluride
  I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
  view full answer...
  
• Can I Put 70" Yakima JetStream Bars On A 2024 Kia Niro PHEV
  You absolutely can put your Yakima JetsStream bars on your 2024 Kia Niro PHEV with factory flush rails. To do so you will need the following parts: SightLine Towers for Yakima Crossbars # Y64AR SightClip Fit Kit for Yakima SightLin3 Towers # Y27AR Since the mounting channel on the Yakima crossbar runs the full length of the bar, you can mount virtually any size crossbar on your roof. That said, we recommend a 50" bar # Y00428 for the Kia Niro. So while your 70" bars will still fit, there...
  view full answer...
• Best Roof Rack For 2024 Subaru Impreza Hatchback
  The best roof rack for your 2024 Subaru Impreza hatchback with a naked roof is from Yakima due to how quiet it is as well as its durability. The roof rack that fits your Impreza is made up of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - Landing Pad 22 for Yakima Towers # Y00248 The JetStream bars are quiet because have what are called "WindRidges" on top that control the flow of the air both over...
  view full answer...
• Can a Roof Rack Be Installed on a 2024 Toyota Sienna?
  Yes, a roof rack can be installed a 2024 Toyota Sienna. The easiest way is if yours has the raised rails on the top of your roof. If your 2024 Sienna has raised roof rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs...
  view full answer...
• Roof Rack For 2024 Chevy Blazer EV With Flush-Mount Rails
  Hi Chris; we do in fact have a roof rack fit for your 2024 Chevy Blazer EV, so long as your Blazer has flush-mounted rails to attach the feet to. The rack is from Yakima, and I verified this fit directly with them for you. The parts that make up the rack for your Blazer are the following: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245 This is an exceptionally...
  view full answer...
• Recommended Roof Rack and Locks for 2024 Toyota RAV4 Hybrid With Yakima ShowDown
  I'm glad you want to stick with Yakima since it is what I would have recommended regardless. For your 2024 RAV4 with flush rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00425 (black) OR # Y00428 (silver) -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR -Yakima Same Key System Lock Cores (QTY 6) # Y07206 for the rack and ShowDown OR # Y07204 for just the rack. The...
  view full answer...
• Does Yakima Roof Rack For 2013 Toyota Prius Require Professional Install
  I would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed. I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the...
  view full answer...
• Roof Rack For 2023 Cadillac XT4
  By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 # Y00245 This rack will not only fit your '23 XT4, it will provide it with a quietest, durable, easy-to-use roof rack that also looks great. The rack is quiet because it has "WindRidges"...
  view full answer...
• Recommended Roof Rack for a 2024 Cadillac XT4 w/ Flush Rails
  Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 I recommend adding the Yakima Same Key System item # Y07204 to help prevent...
  view full answer...
• Best Roof Rack For 2025 Toyota Corolla Cross WIth Bare Roof
  The best roof rack for your 2024 Toyota Corolla Cross with a bare roof is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06153 - BaseClip Fit Kit # Y06154 I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the...
  view full answer...
• Yakima Roof Rack For 2021 Hyundai Kona With Bare Roof to Carry Kayak
  The correct Yakima roof rack for your 2021 Hyundai Kona with a bare roof is made up of the following parts: Naked Roof - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers for Yakima Crossbars # Y33TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06175 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06131 For added protection, I recommend considering adding locks to the rack with the Same Key System Lock Cores # Y07204. Once you have...
  view full answer...
• Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xe
  The Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 5 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
  view full answer...
• What Length Yakima Jetstream Crossbars for 2021 Mazda CX-5
  Yes you can use 60 inch Jetstream bars # Y00426 on your vehicle. Normally the 50 inch part numbers # Y00428, # Y64AR, # Y39AR are recommended for your 2021 Mazda CX-5 but since the mounting channels on the bottom of the Jetstream bars run the full length you can go with a longer bar.
  view full answer...
• Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDX
  Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Will Malone SteelTop Roof Rack Fit 2025 Subaru Outback
  Hi John; is your 2025 Outback the Wilderness model? The Malone SteelTop Roof Rack # MPG203 only fits the rails on the Wilderness. This will not fit the factory rails on the regular Outback models. If that is what you have, let me know in the comments below and I can see what else is available. Are you looking for a specific crossbar length?
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Roof Rack for 2018 Jeep Wrangler JL Unlimited Hard Top to Carry Thule Hullavator Pro Kayak Carrier
  There are a couple options for a roof rack on your 2018 Jeep Wrangler JL Unlimited with a hard top, from Yakima and Thule, with both allowing you to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The parts you need for the Yakima roof rack consist of: - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 # Y00226 The parts you need for the Thule roof rack consist of: - Thule WingBar Evo Crossbars...
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
  I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
  view full answer...
• Thule Hullavator Kayak Carrier Mounting Requirements
  To install Thule's load-assist Hullavator kayak carrier # TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The comparable Yakima ShowDown carrier # Y04081 also has a similar bar space requirement. If your roof rack is a Subaru factory type whose bars do not extend past the rack feet/rails then you can still use the Hullavator but you'll need to add a different...
  view full answer...
  
• Will The Yakima Landing Pad For 2018 Subaru Outback Work On A 2025 Outback?
  Hello Joe, thanks for reaching out. I am sorry to say that the Yakima landing pad for the 2018 Subaru Outback will not carry over to the 2025 model. The 2018 Outback uses the 8000241 Landing Pad 15. The 2025 model uses the 8000254 Yakima Landing Pad 27. Both pads work with the Timber Line towers, so as long as that is what you have, you can re-use them. You will need the new 8000254 landing pad part # Y46VR for the 2025 model. You should be able to re-use your crossbars too. We recommend...
  view full answer...
• Will Older Thule Hullavator Work With Yakima JetStream Roof Rack on 2019 Subaru Outback
  Your older Thule Hullavator 897XT will work with the Yakima JetStream crossbars for your 2019 Subaru Outback. The T-slot on the JetStream bars are 1" wide x 1/2" tall, which is actually slightly larger than the T-slot on the AeroBlade bars so you won't have any issues fitting the Hullavator into that T-slot. As for the length of the bars, I do recommend using the 60" Yakima JetStream Crossbars # Y00426 to ensure you have the needed space to use your Hullavator. The rest of the parts...
  view full answer...
• Can Yakima Round Crossbars Install on Roof of 2015 Subaru Outback Wagon with Factory Rack
  Yakima does have a way to install a set of their round crossbars like the part # Y00408 on the roof of your 2015 Subaru Outback Wagon with the parts # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Yakima RoundBar Roof Rack to Fit 2017 Subaru Outback with Stowable Crossbars
  The parts you listed are correct to make up the Yakima RoundBar rack for the 2017 Subaru Outback models that use Subaru's stowable rack system like you have. Here's links to each part: 48 inch RoundBars # Y00408 SkyLine Towers # Y53TR RoundBar Adapter # Y03536 Landing Pad 15 # Y00241 Since it sounds like you may already have crossbars it's possible you don't need new ones. The 48 inch bars are the recommended length but if yours are longer you can use them on your new Outback. They'll...
  view full answer...
• How To Install the Landing Pad 15 On a 2015 Subaru Outback
  The Landing Pad 15 for Yakima Control Towers part # Y00241 which is used alongside the Yakima JetStream Crossbars part # Y00425 and the SkyLine Towers for Yakima Crossbars part # Y53TR on your 2015 Subaru Outback are very easy to install. This process is done entirely outside the vehicle so you don't have to remove the headliner or anything like that. There is actually only one bolt per pad once you remove the factory crossbars which you can see in the attached photo.
  view full answer...
  
• Yakima Landing Pad For 2024 Subaru Outback Premium With Factory Roof Rails
  Hello Greg. Our records show the correct landing pad for the 2024 Subaru Outback Premium with factory roof rails to be the Landing Pad 27 part # Y46VR. This will work with either the Yakima SkyLine or Control towers.
  view full answer...
• How To Mount The Yakima HD Cross Bars On A 2018 Subaru Outback Wagon
  To add the Yakima HD cross bars to the existing roof rails on your 2018 Subaru Outback wagon. I don't suggest making holes in the roof rails. We cannot provide the information to install them in that manner. I recommend using the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 Item # Y03541 the Landing Pad 15 for Yakima Control Towers - Qty 4 Item # Y00241 and the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track...
  view full answer...
• How To Carry Two Kayaks On a 2019 Subaru Outback
  In order to carry two kayaks on a 2019 Subaru Outback you are first going to need to start with a roof rack for which I recommend using the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00241. The Yakima JetStream Crossbar System has aero shaped crossbars for reduced wind noise, integrated channels for accessories, and a custom fit set of landing pads that install in fixed mounting points on the roof which makes for a really nice overall look. Then, in order...
  view full answer...
• Replacement Covers for Yakima Landing Pads
  Which Landing Pads do you have? I ask, because the replacement cover you need will depend on which Landing Pad you have. Here's a listing of which covers we currently offer with the Landing Pad they work with: • LandingPads 1 - 4, 8 - 10, LP11, and LP16 - LP22, and LP24, part # Y8890029 • LandingPads 5, 6 or 7, part # 8890030 • LandingPads 12, 13 and 15, part # 8880210
  view full answer...
• Can I Use Crossbars That Are Wider Than My 2019 Subaru Outback?
  As long as your 2019 Subaru Outback Wagon has the factory side rails running front to back, then you can install longer Yakima crossbars. The 78" crossbars may be too wide since you do not want to exceed the total width of your vehicle (due to safety and state laws). It looks like your vehicle is about 73" wide so I recommend cutting the 78" bars down to fit your vehicle's width. The complete kit is as follows: Round 78" CrossBars # Y00411, RidgeLine Towers # Y00145, Adapter # Y03536,...
  view full answer...
• How Much Height Does Yakima Roof Rack Add to 2018 Subaru Outback with Stowable Rack System
  We can give you a really good approximation of how much height the Yakima roof rack system will add to your 2018 Subaru Outback with the stowable rack system. To add the Yakima rack to your '18 Outback you will need to first remove its stowable crossbars and install the Landing Pad 15 for Yakima Control Towers # Y00241; these 2 inch tall landing pads will be approximately 1 inch above the top of your Outback's side rails. After that you will add the SkyLine Towers for Yakima Crossbars...
  view full answer...
  
• Widest Crossbar Spread Roof Rack Solution for 2017 Subaru Outback
  I can understand wanting to have a larger spread between the crossbars, especially if you're carrying things like canoes and kayaks and don't want to have large amounts of the boats hanging off of either end of the bars. The issue isn't so much the roof rack kits like the # Y53TR with # Y00241 and # Y00421 , as it is the mounting points available on your 2017 Subaru Outback. The Yakima roof rack kit mentioned above has the largest recommended spread of any of the crossbars that we offer-...
  view full answer...
  
• Removing Rusted Bolts On The Yakima Landing Pad 15 Y00241
  That is going to be a tricky one of the bolts on your Yakima Landing Pad 15 # Y00241 is rusted in place. We generally will use BP blaster on rusted bolts and it has proven to be pretty effective. If that does not do the trick you could try using a left handed drill bit of screw extractor tool like the # PT92CV. This kit includes 5 reverse drill bits and 5 screw extractors which will allow you to remove most screw sizes.
  view full answer...
• Can Two Thule Hullavator Kayak Carriers Be Used On a 2019 Subaru Outback Wagon
  In order to use a Thule Hullavator Pro Kayak Carrier part # TH898 on a 2019 Subaru Outback Wagon you will need to install an aftermarket crossbar system as the factory crossbar system doesn't have the required overhang needed. That said, you'd only be able to install one Hullavator on the roof as two would require a very large crossbar and this is not recommended by Thule anyway. Therefore, you'd need a different carrier for the other kayak and for this I recommend the etrailer J-Style...
  view full answer...
• Yakima Landing Pads for 2017 Subaru Outback Wagon
  The Yakima Landing Pad 15, part # Y00241 is a confirmed fit for the 2017 Subaru Outback. According to Yakima, these will work with SkyLine towers and Control Towers. If it turns out your current towers don't fit the new landing pads, you'll need the following parts to use your existing round bars: - SkyLine Towers for Yakima Crossbars, part # Y53TR - Round Bar SL Adapter, part # Y03536 This will allow you to keep your current bars and install them on the landing pads if needed.
  view full answer...
• Recommended Roof Rack for 2015 Subaru Outback Compatible with Malone Kayak Carrier
  If you have the flush mounted rails that run front to back on your 2015 Subaru Outback, then I recommend the following roof rack: Yakima CoreBar Crossbars - 50" Long # Y00421 SkyLine Towers # Y53TR Landing Pad 15 # Y00241 Lock Cores # Y07204 If you have the raised side rails, then I recommend the Rhino-Rack Vortex StealthBar Roof Rack # JA7975. Both of these options are rated for up to 165 lbs and will work well with the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD. You...
  view full answer...
• Recommended Yakima Roof Rack for 2019 Subaru Outback Wagon
  I'm glad to hear you had a good owner experience with your last Yakima roof rack and I am happy to help you with a new one for your 2019 Outback Wagon non-Touring edition. My favorite Yakima roof rack is their black Jetstream aero-style bar roof rack. This system consists of parts # Y00425, # Y53TR and # Y00241. The black crossbars lend a clean OEM-like appearance and they will be much quieter than basic round Yakima bars (or any other bar shape for that matter) since their design allows...
  view full answer...
• Best Option To Upgrade Roof Rack On 2018 Subaru Outback
  The best upgraded roof rack we can offer for a 2018 Subaru Outback Wagon would be from Yakima, the JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00241 in particular is what I recommend. This system would provide you with a 165 lb weight capacity which would be the limit for this vehicle. It would also provide you with longer crossbars as well as those that have channels which will make the roof rack much more versatile.
  view full answer...

Do you have a question about this Roof Rack?