See what our Experts say about this Yakima Roof Rack

• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• Does Thule DockGrip Kayak Rack Fit 2018 Subaru Outback Limited Factory Crossbars
  Yes, I checked with Thule and for the factory crossbars of your 2018 Subaru Outback Wagon the DockGrip part # TH895 is a confirmed fit and will work well.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• What is Advantage of Top Channel on Yakima JetStream Bar over Core Bar
  The top channel on the JetStream bars have the advantage of offering an easier/cleaner way to attach roof rack accessories. A lot of roof rack accessories are now being made to attach to a channel on the top of the bar. The CoreBars are a less expensive and still a really great bar but it comes down to what type of attachment you prefer. If you let me know what vehicle you have I can help get all of the parts together to install either style of rack on your vehicle.
  view full answer...
• Roof Rack and Kayak Load Assist Recommendation for 2011 Chevy Equinox with Raised Side Rails
  There is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak. Instead, for your 2011 Chevy Equinox with raised side rails I recommend the Rhino-Rack Roof Rack, which will give your Equinox a very functional, durable rack that will allow you to use a load assist. This roof rack uses aero bars and consists of: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack SX Series...
  view full answer...
  
• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Which Rook Rack Would be the Most Quiet on My 2024 Lexus LX600 F Sport?
  Hello David, Congrats on the new Lexus, I really like the new grill designs I have been seeing on the SUV's. I understand your concern with the noise as some systems can be quite noisy. When it comes the the rail systems you definitely get what you pay for. I am showing that the 2024 Lexus LX 600 comes with the flush mounted rails (please refer to the image that I attached) so you will want the Thule WingBar Evo Roof Rack for Flush Rails - Aluminum - Black - Qty 2 # TH49GA (for silver...
  view full answer...
• Highest Capacity Roof Rack for a 2018 Subaru Outback Touring
  The Thule roof racks available for the 2018 Subaru Outback have a capacity of 110 pounds no matter which bar style is being used. There are roof racks that are rated higher though so to maximize the capacity of the vehicle (which according to the owner's manual is 176 pounds on models that have factory side rails that run front to back or 150 pounds for models with crossbars integrated into the rails). All of the Yakima roof rack options are rated for 165 pounds. For a Yakima roof rack...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Will the Gutter Mounts # RL150S13-3 Attach to a Rhino-Rack Pioneer Platform?
  I went ahead and reached out to my contact at Rhino-Rack, and she confirmed that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall # RL150S13-3 will technically attach to a Rhino-Rack Pioneer platform. However, Pioneer Platforms are customized to fit certain roof dimensions, and I cannot recommend which platform you will need for your vehicle. In order to give you the proper fitment and recommendation, please feel free to respond to this answer with the year/make/model/roof...
  view full answer...
• Can I Convert a Hullavator 897XT to Work w/ Yakima CoreBar Crossbars?
  I am sorry the older Hullavator 897XT you own can not be converted to mount on Yakima CoreBar Crossbars like item # Y00421 because there is no t-slot. I confirmed this information with Thule. The only solution I have for you is to upgrade to the new Hullavator item # TH898 you were looking at.
  view full answer...
• Recommended Yakima Round Bars for a 2025 Toyota RAV4 W/ Factory Flush Rails
  Hey A, for your 2025 Toyota RAV4 with factory flush rails you can use the Yakima SkyLine Roof Rack for Fixed Mounting Points # Y55FB which includes the Yakina round bars, the towers, and the round bar adapter. These towers will attach directly to your flush rails on your RAV4, so you won't need anything else to get it to work. Let me know if there is anything else I can do for you!
  view full answer...
• Bike Rack Recommendation for a 2017 Honda Civic
  Hello Tonya - Thanks so much for letting me know that your 2017 Honda Civic is a 4-door sedan. Once I know if you have a center exhaust on your vehicle, I can go ahead and recommend some great 2-bike racks for you!
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
  Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
  view full answer...
• Will Thule Hull-A-Port Roof Kayak Carrier Fit Yakima Core Bar Roof Rack
  Yes, the Thule Hull-A-Port J-style kayak carrier # TH834 will fit fine on Yakima Core Bar roof rack crossbars. These bars, such as 50-inch set # Y00421, have an aero profile that is fully compatible with the hardware on the Hull-A-Port.
  view full answer...
• Adapter Needed to Use Older Yakima PowderHound on New Yakima CoreBars
  I have a solution for you, but the Replacement Mounting Hardware for Yakima PowderHound # Y8860040 will not work with your 3044 Yakima ski rack; I confirmed this with my contact at Yakima. The Universal MightyMounts # Y03590 is exactly what you need to adapt your first generation PowderHound ski rack (for round bars) to fit the Yakima CoreBars, like # Y00421 on your vehicle. I've attached the installation instructions for you to check out at the bottom of the page.
  view full answer...
• Can the Thule Hullavator Pro Kayak Carrier Be Used With Yakima CoreBar Crossbars
  Yes, you can mount the Thule Hullavator Pro Kayak Carrier # TH898 on Yakima CoreBars like the Yakima CoreBar Crossbars # Y00421. The Thule Hullavator Pro Kayak Carrier # TH898 can be mounted using the clamps or in crossbar channels. Just keep in mind that to use the Hullavator, your crossbars need to extend 4"-8" beyond your roof rack feet.
  view full answer...
• Parts Needed To Carry a Canoe With Yakima CoreBar Roof Rack
  The design for the Yakima CoreBar Crossbars # Y00421 will not allow for a traditional Load Stops # 753-3761 that are designed to fit in a track type channel. If you wanted to carry a canoe with your CoreBar the Yakima SweetRoll # Y04074 uses saddles to support the canoe above the bars. If you feel switching your crossbars is the best option for being able to use load stops, please let me know what vehicle and roof rack you have so I can ensure you get the right crossbars to fit your towers...
  view full answer...
• Parts Needed to Swap the Yakima CoreBar Crossbars from an Acura MDX to a 2022 BMW X6
  Assuming you're wanting to use the Yakima CoreBar Crossbars # Y00421 you're looking at, then yes you're just going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06179, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06161 as well as the BaseLine Towers for Yakima Crossbars # Y28TR.
  view full answer...
  
• Recommended Roof Rack for 2016 Ford Edge Sport with
  I am happy to tell you that we do ship to APO addresses! If you let me know what rack you are interested in or what vehicle you are trying to outfit I'd be happy to help you out.
  view full answer...
  
• Roof Rack for 2017 Chevy Spark
  There is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Do You Recommend the Thule Motion XT XL or the Thule Motion XT XXL for My 2021 Nissan Rogue?
  In order to determine the compatibility of either the Thule Motion XT XL # TH629806 or the Thule Motion XT XXL # TH629906, it truly depends on if you have a bare roof, raised rails, or a factory roof rack currently installed. The reason why this matters is because not only do crossbars come with different heights and widths, but your roof has different available length based on what roof setup you have. The roof setup is important in determining if you can fully open the rear hatch of your...
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
  The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Roof Rack Recommendation for 2013 GMC Terrain for Carrying Thule Hullavator
  For your 2013 GMC Terrain with a naked roof you would want a Yakima roof rack like the JetStream part # Y00425, # Y28TR, and # Y06146 and you'd easily be able to carry a Hullavator # TH898. The Hullavator needs a rack that over hangs past the feet a few inches and can install into the top channel of this rack for an easy and secure install.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Recommended Yakima Roof Rack for a 2019 Honda CR-V w/ No Roof Rails
  I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162. The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked...
  view full answer...
• Yakima or Thule Roof Rack for 2019 Honda CR-V with Naked Roof
  When it comes to roof rack quality both Yakima and Thule are right there at the top. The Thule rack will be a little easier to install on your 2019 Honda CR-V and the crossbar design is pretty sweet but I like the Yakima brand because you can easily upgrade to larger crossbars with no issues, it has a similar-ish design in the abilities of the T-Slot that the Thule has, but my favorite part are the small adjustments in the legs that you make with the Yakima roof rack. Some people say...
  view full answer...
• Roof Rack For Rooftop Tent On A Honda CRV 2021 Hybrid
  The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189. This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty strong,...
  view full answer...
• Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the Rear...
  view full answer...
• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
  Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
  Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y28TR, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V with Naked Roof
  For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06188 for the front Fit Kit, and # Y06189 for the rear. The aerodynamic bars on this system will allow for an extremely quiet ride and they have a 165 pound weight capacity. I have attached a video demonstration on the 2017 CR-V so you can get a good idea of what it will look like...
  view full answer...
  
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Are Yakima BaseClip Fit Kits Y06188 and Y06189 the Same as Yakima Baseclip 188 and 189?
  Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 and # Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.
  view full answer...
• Roof Rack Recommendation for 2018 Honda CR-V for Best Wind Resistance
  Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
  view full answer...
• Roof Rack for a Thule Hullavator # TH898 on a 2018 Honda CR-V
  In order to know what roof rack you need to use the Thule Hullavator # TH898 on your 2018 Honda CR-V, it depends on if you have flush factory rails or a bare roof on your vehicle. Also, the space between the feet where you install the crossbars is important as well. This is because the Thule Hullavator requires at least 4 inches of additional length past the feet in order to function. If you have flush rails, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum -...
  view full answer...
• Can You Use Roof Rack Crossbars Wider Than The Roof Of A 2017 Honda CR-V
  The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425. To do this...
  view full answer...
• Parts Needed to Add Yakima Round Bar Roof Rack to 2020 Honda CR-V With Naked Roof
  You should be able to use your Yakima round crossbars to your 2020 Honda CR-V with a naked roof, so long as they are the right size in order to ensure there is enough room for them to cross the top of your vehicle, but also so they aren't so long they stick way out on the sides and become a hazard for people walking by. So you'll want to measure your crossbars to make sure you have the right size, as they should be the 48 inch bars. Here is exactly what you will need for a round bar Yakima...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked Roof
  For your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
  view full answer...
• Roof Rack Recommendation for a 2021 Honda CR-V
  A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts: - Yakima JetStream Crossbars - Aluminum # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189 - (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204 The reason why the Yakima setup is because the aerodynamic design...
  view full answer...
• Recommended Roof Rack for a 2021 Honda CR-V and Compatibility with Thule Accessories
  I'm glad to hear that you have had good experiences with our products! As for a roof rack for your 2021 Honda CR-V, I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that reduce wind drag and noise. To mount them to your roof, you will need the BaseLine Towers, part # Y28TR, and the two fit kits, # Y06188 and # Y06189. This system mount to a naked roof without rails (if you have rails, let me know), and as for the compatibility between brands, they are...
  view full answer...
• Can 60" Yakima HD or JetStream Crossbars Fit a 2021 Honda CR-V With Naked Roof?
  Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars. Yakima HD Crossbars # Y01157 BaseLine Towers # Y28TR HD Bar SL Adapter # Y03541 BaseClip Fit Kit # Y06188 BaseClip Fit Kit # Y06189 If you choose the 60" JetStream crossbars you would need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip...
  view full answer...
• Roof Rack for 2018 Honda CR-V With Bare Roof
  For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
  view full answer...
• Roof Rack Recommendation for Carrying 2 Heavy Kayaks on a 2018 Honda CR-V Naked Roof
  It looks like you have a naked roof on your 2018 Honda CR-V. Because of this, there is no Inno crossbar fit for your vehicle, but we do have alternate roof racks for you. As for the Thule option, the highest capacity of any Thule combination is 110 pounds (the lowest capacity component must be used, so the 165-pound capacity feet will still be hindered by smaller capacity components). In fact, the highest capacity of any combination available for your vehicle is 165 pounds. That is why...
  view full answer...
• Recommeded Roof Rack And Crossbars For A 2017 Honda CR-V Carrying A Roam Adventure 95L Case
  I recommend first adding a set of crossbars like the Yakima JetStream Crossbars # Y00428 with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. Then I would add a platform roof rack like the Yakima LockNLoad Platform Roof Tray # Y05047. With this setup you will have no issue attaching your Roam Adventure 95L case to the roof of your 2017 Honda CR-V. Additionally, the mentioned crossbar towers and fit kit will only work...
  view full answer...
• Roof Rack Recommendation with 60 Inch Crossbars for 2017 Honda CR-V with Naked Roof
  Rhino-Rack has their 59" Vortex Bars # RRVA150B-2 which are more likely to fit than their 65" Vortex bars for your 2017 Honda CR-V with a naked roof. The Vortex bars have limited space on the underside where they fit with the feet so even if you cut the 65" bars it wouldn't change where that spacing is at. Since Rhino-Rack hasn't tested and confirmed the fitment of the 59" bars on your CR-V I recommend going with the Yakima JetStream roof rack system instead. It uses crossbars that have...
  view full answer...
• Is there an Inno Fit Kit for the 2018 Honda CR-V Naked Roof
  I spoke with Inno to check on this for you. There is not a fit kit available for the 2018 Honda CR-V naked roof from them so instead you will need to get a new roof rack from another manufacturer. I recommend using the Yakima JetStream Crossbars, part # Y00425. They're aero-style crossbars with T-slots so they're compatible with most accessories. To mount them, you'll need the BaseLine Towers, part # Y28TR, and the two fit kits, part # Y06188 and # Y06189. I've linked to a video review...
  view full answer...
• What is Crossbar Spread of Yakima Roof Rack that Fits 2020 Honda CR-V
  When you install the Yakima Baseline roof rack part numbers # Y00421, # Y28TR, # Y06188, and # Y06189 on your 2020 Honda CR-V the spread will be 39-3/4 inches. You have to install the rack at the exact width and specs that Yakima requires.
  view full answer...
• Recommended Yakima Roof Rack for a 2019 Honda CR-V w/ No Roof Rails
  I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162. The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked...
  view full answer...
• Yakima or Thule Roof Rack for 2019 Honda CR-V with Naked Roof
  When it comes to roof rack quality both Yakima and Thule are right there at the top. The Thule rack will be a little easier to install on your 2019 Honda CR-V and the crossbar design is pretty sweet but I like the Yakima brand because you can easily upgrade to larger crossbars with no issues, it has a similar-ish design in the abilities of the T-Slot that the Thule has, but my favorite part are the small adjustments in the legs that you make with the Yakima roof rack. Some people say...
  view full answer...
• Roof Rack For Rooftop Tent On A Honda CRV 2021 Hybrid
  The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189. This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty strong,...
  view full answer...
• Roof Rack Recommendation for a 2020 Porsche Macan With a Sunroof
  I am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip...
  view full answer...
  
• Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the Rear...
  view full answer...
• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
  Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
  Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y28TR, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
  view full answer...
• Roof Rack Recommendation for 2021 Porsche Macan with Naked Roof
  Inno does not have a roof rack fit for your 2021 Porsche Macan but we do have other options that would work great. For that I would recommend the Yakima round bar roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06163, # Y06189. We recently went out and installed several of the roof racks we carry and everyone really liked the Yakima rack the best even though it does cost a little more than some other options.
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V with Naked Roof
  For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06188 for the front Fit Kit, and # Y06189 for the rear. The aerodynamic bars on this system will allow for an extremely quiet ride and they have a 165 pound weight capacity. I have attached a video demonstration on the 2017 CR-V so you can get a good idea of what it will look like...
  view full answer...
  
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Are Yakima BaseClip Fit Kits Y06188 and Y06189 the Same as Yakima Baseclip 188 and 189?
  Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 and # Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.
  view full answer...
• Roof Rack Recommendation for 2018 Honda CR-V for Best Wind Resistance
  Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
  view full answer...
• Roof Rack for a Thule Hullavator # TH898 on a 2018 Honda CR-V
  In order to know what roof rack you need to use the Thule Hullavator # TH898 on your 2018 Honda CR-V, it depends on if you have flush factory rails or a bare roof on your vehicle. Also, the space between the feet where you install the crossbars is important as well. This is because the Thule Hullavator requires at least 4 inches of additional length past the feet in order to function. If you have flush rails, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum -...
  view full answer...
• Can You Use Roof Rack Crossbars Wider Than The Roof Of A 2017 Honda CR-V
  The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425. To do this...
  view full answer...
• Parts Needed to Add Yakima Round Bar Roof Rack to 2020 Honda CR-V With Naked Roof
  You should be able to use your Yakima round crossbars to your 2020 Honda CR-V with a naked roof, so long as they are the right size in order to ensure there is enough room for them to cross the top of your vehicle, but also so they aren't so long they stick way out on the sides and become a hazard for people walking by. So you'll want to measure your crossbars to make sure you have the right size, as they should be the 48 inch bars. Here is exactly what you will need for a round bar Yakima...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked Roof
  For your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
  view full answer...
• Roof Rack Recommendation for a 2021 Honda CR-V
  A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts: - Yakima JetStream Crossbars - Aluminum # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189 - (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204 The reason why the Yakima setup is because the aerodynamic design...
  view full answer...
• Recommended Roof Rack for a 2021 Honda CR-V and Compatibility with Thule Accessories
  I'm glad to hear that you have had good experiences with our products! As for a roof rack for your 2021 Honda CR-V, I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that reduce wind drag and noise. To mount them to your roof, you will need the BaseLine Towers, part # Y28TR, and the two fit kits, # Y06188 and # Y06189. This system mount to a naked roof without rails (if you have rails, let me know), and as for the compatibility between brands, they are...
  view full answer...
• Can 60" Yakima HD or JetStream Crossbars Fit a 2021 Honda CR-V With Naked Roof?
  Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars. Yakima HD Crossbars # Y01157 BaseLine Towers # Y28TR HD Bar SL Adapter # Y03541 BaseClip Fit Kit # Y06188 BaseClip Fit Kit # Y06189 If you choose the 60" JetStream crossbars you would need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip...
  view full answer...
• Roof Rack for 2018 Honda CR-V With Bare Roof
  For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
  view full answer...
• Roof Rack Recommendation for Carrying 2 Heavy Kayaks on a 2018 Honda CR-V Naked Roof
  It looks like you have a naked roof on your 2018 Honda CR-V. Because of this, there is no Inno crossbar fit for your vehicle, but we do have alternate roof racks for you. As for the Thule option, the highest capacity of any Thule combination is 110 pounds (the lowest capacity component must be used, so the 165-pound capacity feet will still be hindered by smaller capacity components). In fact, the highest capacity of any combination available for your vehicle is 165 pounds. That is why...
  view full answer...
• 2018 Porsche Macan Yakima Fit For Naked Roof
  The Yakima roof rack that will fit your 2018 Porsche Macan consists of the following; Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06163, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06189, and Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This rack has two different...
  view full answer...
• Recommeded Roof Rack And Crossbars For A 2017 Honda CR-V Carrying A Roam Adventure 95L Case
  I recommend first adding a set of crossbars like the Yakima JetStream Crossbars # Y00428 with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. Then I would add a platform roof rack like the Yakima LockNLoad Platform Roof Tray # Y05047. With this setup you will have no issue attaching your Roam Adventure 95L case to the roof of your 2017 Honda CR-V. Additionally, the mentioned crossbar towers and fit kit will only work...
  view full answer...

Do you have a question about this Roof Rack?