FITS 2016 Chevrolet Silverado 2500
Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs

Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs

Item # EM07707

lowest price pledge

Retail:$605.02

Our Price: $582.65

You Save: $22.37
Ladder Racks
Confirmed to Fit
2016 Chevrolet Silverado 2500

6-1/2 Foot Bed

8 Foot Bed

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Truck Freight Shipping

Shipping Weight: 167 lbs

Quantity: 
In Stock, Ships Today
Erickson 4 Bar Ladder Racks - EM07707
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Erickson
  • Truck Bed Ladder Rack
  • Fixed Rack
  • Over the Cab
  • Steel
  • No-Drill Application
  • 4 Bar
  • Fixed Height
  • Heavy Duty
Erickson ladder racks for your 2016 Chevrolet Silverado 2500 are available from etrailer.com. Installation instructions and reviews for your Chevrolet ladder racks. Expert service, and cheapest ladder racks price guarantee. etrailer.com carries a complete line of Erickson products. Order your Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs part number EM07707 online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (8)
  • Q & A (55)
  • Videos (3)
  • Photos
  • Why etrailer?

2016 Chevrolet Silverado 2500 - Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs

This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds.


Features:

  • Extended-length truck bed ladder rack lets you haul ladders, lumber, and more with ease
  • Over-the-cab extension allows you to carry longer loads
    • Front crossbar adjusts to accommodate different size cargo
  • Side rails provide multiple tie-down points and extra load support
  • Convenient tie-down cleat on each upright provides additional place to anchor your cargo
  • Curved grab-handles on rear of rack provide extra leverage for loading cargo
  • Aerodynamic design reduces drag and wind noise
  • Easy installation with patented clamps - no drilling required
    • Bed rail clamps are pre-drilled for optional permanent installation - hardware not included
  • Universal system adjusts to fit most truck bed widths
  • Sturdy steel construction
  • Black powder coat finish resists corrosion, chips, and scratches
  • Corrosion-resistant, yellow-chromate-plated hardware
  • Compatible with bed liners and toolboxes
    • Toolbox installation requires some modification on truck beds without bedliners


Specs:

  • Weight capacity: 800 lbs
  • Dimensions: 135" long x 54-13/16" wide x 32-7/8" tall
  • 90-Day limited warranty


Notes:

  • Due to the size of this item it ships via truck freight and only to the contiguous United States.
  • Will not work with tonneau covers. If your truck has a bed liner some alteration may be required to properly install this ladder rack.

Over-The-Cab Ladder Rack

Over-the-cab ladder rack

This Erickson ladder rack extends over the roof of your truck to maximize your carrying capacity. It has integrated side rails for load support and for tying down your gear. The extra coverage allows you to carry longer loads without having to worry about overhang. And the added surface area for cargo helps to evenly distribute load weight.


Easy, Clamp-On Installation

Clamp on installation

Sturdy, user-friendly clamps let you mount this rack to your truck bed without drilling or other modifications. Simply position the bases at the corners of the truck bed and clamp them to lips of the truck bed rails. Assemble the upper portion of the rack and attach it to the uprights, then bolt the uprights to the bases. The rack can be installed on short-bed or long-bed trucks.


There are holes in each bed rail clamp that allow you to permanently bolt the rack to your truck bed. Permanent installation will require drilling. Hardware not included.


If you are installing the rack on a truck bed without a bed liner, the bolts for the mounting clamps may cause interference when installing a toolbox. To install a toolbox on a truck bed without a bed liner, trimming of the clamp bolts may be necessary for the toolbox to sit flush on your truck's bed rails.


Load Support and Security

Ladder rack front viewSide rail handles

The ladder rack has integrated side rails that provide load support and multiple tie-down points for securing your cargo. A moveable crossbar in the over-the-cab extension helps provide extra support for the front end of a load. There is a convenient tie-down cleat on each of the rack's 4 vertical uprights to provide additional anchoring points for your truck's load. There is also a handle on each side of the rack at the rear to provide additional leverage and support for easier loading and for accessing that hard-to-reach cargo.


Sturdy Steel Construction

Steel construction

Steel is highly durable, maintains structural integrity, and does not age or decay as quickly as other materials. A black powder coat finish has been added to help resist corrosion, chips, and scratches, and to keep the rack looking new. The nuts and bolts have a yellow chromate plating that helps prevent corrosion.



07707 Erickson Universal Contractor Pickup Truck Overhead Cargo Carrier - Steel - 800 lbs




California residents: click here


Video of Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Erickson Over-The-Cab Truck Bed Ladder Rack Installation - 2015 Chevrolet Silverado 1500

Speaker 1: Today on our 2015 Chevrolet Silverado 1500 we're going to be taking a look at the Erickson Over-the-Cab Truck Bed Ladder Rack, Part Number EN07707. This Over-the-Cab Ladder Rack is going to let you carry some of the longest items such as ladders, pipes and lumber.This over-the-cab extension is going to be one of the longest on the market, adding about 56" from the bed rail to the over-the-cab rail. The middle rail on the over-the-cab extension can be adjusted to accommodate various loads by loosening the bolts on each side and sliding it forward or backward.Now we can have smaller cargo here in the rear such as bags or coolers and strap them down and we still have room in the front for other accessories, or we could slide the rail forward and put those items up there and still have room for ladders and other things here in the back. The raised side rails provide extra support and also act as a load stop to prevent cargo from sliding off the edge of your ladder rack. The side rails can also be used as a tie down point, as well as the hooks here, here and here located on each leg.When you're ready to load it up the side rails will help you get that extra leverage you need to get your heavier, longer cargo up there. They can also be used as a handle to easily get into the back of your truck bed.

Here you can see we've got a 12-foot ladder and there's plenty of room to load it up and be supported at all ends and plenty of tie down locations to keep it nice and secure.From the bed rails to the top of the side rails it's going to be about 33". From the front of the cab extension to the rear of the side bar it's going to be about 136". The width from outside of the rail to outside of the rail is going to be about 55-1/2". It has an 800 pound carrying capacity thanks to its complete steel construction, and black rust resistant coating will help make it last and looking new for a long time.There are two ways you can mount your ladder rack to your truck bed. A permanent installation can be done by drilling out the rails of your truck bed and putting in nuts and bolts.

This would be great for construction work that's going to be done every day on your truck, for those hard-working work trucks.Or you can install it using these J-bolts. This will just clamp right on and requires no drilling whatsoever. The J-hooks would be ideal for those who don't want to put any holes in their truck, may want to take it off at a later point, or don't need to use it every day. Now let's go ahead and show you how to get it installed.Now it may look intimidating with all of this hardware here, but there's actually not that much to it. All the bolts are only a few sizes.

The larger bolts are going to be a 24 millimeter. The medium size will be a 19 millimeter. These nuts here will be 18 millimeter, and the rest will all be 17 millimeter, so you only need a few wrenches and a few sockets to complete this job.You're going to want to leave your hardware loose for your legs, as they need to be adjusted properly to fit your 1500's truck bed. You're going want to grab an extra set of hands or two to help you lift it up on the truck and get your rails lined up with your ladder rack feed.Now we're going to give you a closer look at how we align our feet. Our J-hook goes through this hole here, so when positioning your feet on your bed rails you want to make sure that your J-hook can properly seat underneath your bed rail here.

This is as far forward as we can go on this truck due to our drop-in bed liner. You secure the J-hook with an M12 washer, lock washer and nut.Now we left the hardware loose on our legs because when you're positioning it on the truck to get the alignment we just talked about it slides along this rail here to fit the appropriate size for your bed. With all of our feet in the appropriate location, legs adjusted properly, we're going to go back now and fully tighten down our J-hooks, and we're going to repeat this for all the feet.We want to make sure that our lock washer is collapsed completely to insure that it's tight and secure. Now with our J-hooks tightened down and our feet in place, we just need to go back, make any adjustments you need to make sure that it's square and level by moving the legs, and then tighten down all the rest of your loose hardware. Now with everything tightened down and all secure, we're ready to load it up and hit the road.That completes our look at the Erickson Over-the-Cab Truck Bed Ladder Rack on our 2015 Chevrolet Silverado 1500.


Customer Reviews

Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 800 lbs - EM07707

Average Customer Rating:  4.8 out of 5 stars   (8 Customer Reviews)

This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds.

- EM07707
by:

We have 2 of this item on our trucks and they have been awesome! This has been an excellent product, build right and does what it is suppose to do... They are still looking as good as the day we installed them on our trucks... We will order more as the time comes that we need them! The company had lots of farther up emails along the way of ordering and after the product was installed. Great company to do business with..... 591708



- EM07707
by:

There are a few rust spots already 485415



- EM07707
by:
2012 Nissan Frontier

This rack exceeded my expectations. The quality is second to none. Installation was quick and if required, removal is even quicker. Adding this rack to my Nissan Frontier has given me much more functionality and increased capability. Delivery took a little longer than expected, but customer support at etrailer kept me informed and sought alternatives if I couldn't wait. I wouldn't hesitate to recommend this product or the good folks at etrailer to get it to you. 324037



- EM07707
by:

Love the product, fits just about any truck and is easy to take off. The only thing I didn't like was the assembly instructions. Very hard to read and understand what went where. 400982


Comments

Works great. The Erickson ladder rack works great for my business. The only issue was understanding how to put it together, but once that was figured out I’ve had no problems with it.

Tim S - 07/03/2018

40472

- EM07707
by:

Used it for mounting roof top tent onto utility trailer. Also used to attached water jugs, propane tank, water tank, cree lights, etc. Also used to carry kayak and atv. Rack is high enough from trailer to carry atv and still carry tent on top. 612757



- EM07707
by:

Excellent build. Sturdy ladder rack. Easier to have 2-3 people assembling the ladder rack as opposed to 1 person. Only issue is the rear top bolt may occasionally come loose, but that may be an error on my end. 5/5 star ladder rack. 470380



- EM07707
by:
2006 Ford F-150

This ladder rack has been great. Very sturdy construction, easy to put together, no issues with rusting, so the coating is holding up well. The only small issue we had with it is that it seems to sag in the middle where the front and the back join just a little bit. We can't quite seem to get it level. It's very possible that is due to how we put it together, but we can't quite seem to fix it. It wouldn't matter much except that we are hauling boats and having the cross bars be level with each other would be helpful. 605025



- EM07707
by:
1971 Chevrolet C/K Series Pickup

Fits my 71 C10 great. Looks good and can carry everything I need. Best looking rack out there in my opinion 400378


12
12

Ask the Experts about this Erickson Ladder Racks

Do you have a question about this Ladder Rack?



Do you have a question about this Ladder Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ladder racks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ladder rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Updated by:
Sarah W
Test Fit:
Jared G
Test Fit:
David F
Written by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.