See what our Experts say about this Erickson Ratchet Straps

• Do the ShockStrap Shock Absorbing Tie-Down Straps Come in a Retractable Style?
  The ShockStrap Ratcheting Tie-Down Straps w Built-in Shock Absorbers - 1-1/2" x 7' - 1K - Qty 2 # 297-7RSDB are not available in the retractable style. This is simply because the shock absorbing element wouldn't be able to be retracted to the spring loaded coil. The manufacturer doesn't make a semi-retractable option at this time. If you would like a retractable strap instead of the shock absorber, then I recommend the Erickson Re-Tractable Ratchet Straps w/ Push Button Releases -...
  view full answer...
• Class C Motorhome/RV Stabilizers That Are Not Permanently Attached To The Frame
  Yes, you can use a Leveling Scissor Jack Set # JSC-24 to stabilize your Class C motorhome without having to attach them to your frame. Some of the more popular options are the MORryde Hitch Mounted Trailer Stabilizer # MR22AR and Valterra Folding Manual Stabilizer # 020106 for stabilizing a motorhome. Since you will not be attaching the jacks to your motorhome these are easier to position and raise than attempting to hole a scissor jack style stabilizer. My preference would be to use...
  view full answer...
• Can Rollator Walkers be Carried on a Trunk Mount Bike Rack on a 2014 Kia Soul
  If your Rollators can fold up relatively flat then they could be placed on a trunk mount bike rack on your 2014 Kia Soul. I recommend going with a model that is designed to carry up to 3 bikes because there will be more space. I recommend the Hollywood Racks Over-the-Top rack # HRF2-3 because it will work with or without that little spoiler piece at the top of the hatch on the Kia Soul. Keep in mind that trunk mount racks are not tested for use with Rollators. The other option is to install...
  view full answer...
• How to Bleed Trailer Brakes Without Access to Underside of Actuator
  Once the Demco Hydraulic Brake Actuator w Drop and Electric Lockout # DM8104311 is installed there isn't really an easy way to access that cylinder since this sits on top of the trailer tongue. Something else you might try doing is using a ratchet strap like the Erickson # 34413 to manually pump the coupler like the instructions call for. Attached is a clip from the linked instructions for you to check out.
  view full answer...
• Cargo Tie Down Strap Recommendations For a 6,600 Pound Tractor
  When selecting straps and tie downs, you will want to look at the maximum load strength and the safe working load limit. A strap like # EM69627 has a break strength of 10,000 pounds but a safe working load limit of 3,300 pounds. Using 2 of these minimum would equal out to 6,600 pounds. Because the weight of a tractor can depend on the level of the fluids and things like mud getting stuck to it, I would actually look at a higher rated strap like # 58514. This strap has a safe working load...
  view full answer...
• How To Mount A Digital Advertising Sign To The Roof Of A Golf Cart
  I have a possible solution for you, but we do not have roof racks specifically made for golf carts. It looks like your Star Magellan 4+2-AC has a width of about 47". You could install a universal padded roof rack that requires no drilling such as the Yakima EasyTop Universal Fit Roof Rack - Padded - 80 lbs # Y07418. This simply straps around your roof and provides two padded crossbars measuring 37-1/4" long, 5" wide, and 3" tall with a weight capacity of 80lbs. This system is used to carry...
  view full answer...
• 2015 Subaru Forester Limited Roof Rack Recommendation for Carrying Ladders
  For your 2015 Subaru Forester that has raised rails that run from front to back the Malone SteelTop Roof Rack part # MPG203 has been confirmed as a fit and would work well for your vehicle. For load stops for the ladders the part # TH503 would be recommended and then for straps # 34413 for ratchet straps. If your ladders will be 20 feet long on the roof of your vehicle you will need to check your local DOT for regulations on carrying an item that long.
  view full answer...
• Solution for Hauling 11'6" Motorized Fishing Kayak in Truck Bed
  It sounds like you're wanting to use the Let's Go Aero TwinTube U-Build-It Slide-Out Hitch Rack, part # HMK901 as a hitch load extender, rather than using it as a platform to mount a tray or box to carry extra cargo. Assuming you have a truck, I would actually recommend using a product designed for that application, like the Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs, part # EM07605. I've attached a photo of it being used to haul a motorized jon...
  view full answer...
  
• Roof Rack for a 2003 Toyota Tacoma to Carry Canoe and Ladder
  The Sportrack Semi-Custom Roof Rack part # SR1005 is a semi custom fit roof rack that offers a great price but it does not fit quite as well as some of the other roof rack systems. Unless you absolutely have to have the most inexpensive option I would not recommend this rack for you. A much better option for you since you plan on carrying longer items, (canoe and ladder) would be a Roof Rack with T-Load Hitch Mounted Load bar that consists of the following parts: Inno Aero Crossbars #...
  view full answer...
• Cargo Net Compatibility with a Rola Roof Mounted Cargo Basket
  The CargoSmart Stretchable Cargo Net, part # CS54FR, will fit your 54-1/2" X 40-1/2" X 5" Roof Mounted Cargo Basket. This cargo net uses a bungee cord net that allows it to grip a variety of different items. The CargoSmart cargo net provides plenty of strength, but that is dependent upon the type of terrain you are traveling on and the weight of the times on the roof rack. For heavier items you may want to use ratcheting straps like the Retractable Ratchet Straps with Push Button Release,...
  view full answer...
• Motorcycle Tie-Down Recommendations for a 700 Pound Motorcycle and Pressure Treated Flat Bed
  The CargoBuckle Mini G3 Retractable, Ratcheting Tie-Downs, # IMF103745-86, would work well to secure your 700 pound motorcycle. If at all possible, bolt the tie-downs to the metal part of the frame. If you have attach it to the wood bed, I recommend adding a steel backing plate on the underside of the wood for support. You could also add some D-rings, like # RR5K, which comes with a backing plate. You may also need adapter # IMF14086 to use with these D-rings. You could also use straps...
  view full answer...
• Roof Rack and Kayak Carriers for Use on 2014 Kia Sorento LX with Naked Roof
  For your 2014 Kia Sorento LX with naked roof and without the Vista Roof feature you can use any of the roof rack systems shown on the link provided. My recommendation is the Rhino-Rack roof rack consisting of # RRVA126B-2, # RRRLKVA, and # DK179. This is a great system that will give you aero bars for less wind noise and a cleaner look. This rack also includes locks which often are an added expense with other manufacturers. We also offer foam block kayak carriers that do not require...
  view full answer...
• Measurement Of Retractable Ratchet 34413.
  I pulled one of these from our warehouse and measured the length when the straps are fully retracted. They measure 12-3/4 inches from the end of one s-hook to the end of the other s-hook. If space is a concern the strap can be folded, putting the s-hooks under the ratchet. The measurement with the s-hooks folded under the ratchet is approximately 5-1/2 inches. This retractable ratchet has a working load limit (WLL) of 500 lbs. If you will be working with a load greater than 500 lbs, I...
  view full answer...
• Bumper Mounted Cargo Carrier For Travel Trailers And Campers
  The 24x60 etrailer Cargo Carrier for RV Bumper - Steel # e99049 will work for your 2020 Rockwood Roo 235S as long as the rear bumper is 4" wide and either 4" or 4-1/2" tall. This cargo carrier has a 500lb weight capacity and has the ability to be folded up when not in use, saving space at the rear of your travel trailer. The outside dimensions are 61-5/8" wide, 25-5/8" deep, and 3-7/8" tall. I recommend adding ratchet straps such as Erickson Re-Tractable Ratchet Straps w/ Push Button Releases...
  view full answer...
• Can a Trailer hitch Mount Cargo Carrier be Used to Hold a 185 Pound Generator
  A trailer hitch mount cargo carrier would be a good choice to carry your 185 pound generator. You will need one that fits the trailer hitch on the vehicle and that has the size and capacity to hold the generator. The Curt carrier , # C18152, is designed to fit 2 inch trailer hitch receivers. It has a capacity of 500 pounds so it can easily handle the generator. The usable space is 23-7/8 inches by 60-1/6 inches so you will want to compare that to the dimensions of the generator. To secure...
  view full answer...
• Trailer Hitch Mounted Cargo Carrier Recommendation for Use on a 5th Wheel Trailer
  You will be able to use a hitch mounted cargo carrier on the back of your 5th wheel trailer. I recommend going with the Curt 17x46 Cargo Carrier, # C18145 because it works with a class I, II, III, or IV hitch. It comes with an adapter to be used in a 2-inch receiver so you will not need to use a separate one when using it on the truck. This carrier does not have the mesh deck like # 63153 but you could easily place a flat piece of solid material down if needed. When used with a 1-1/4"...
  view full answer...
• Size of S-Hooks on Erickson Retractable Push Button Release Ratchet Straps # 34413
  I measured the diameter of the pre-drilled tie-down holes on the Curt Cargo Carrier # C18100; these measure 3/4-inch. The plastic-coated hooks on the Erickson Retractable Push Button Release Ratchet Straps # 34413 measure 23/64-inch diameter (just under 3/8-inch). These hooks will easily fit in the tie-down holes on the Curt carrier. The Erickson straps feature a convenient push button ratchet release that will retract the straps fully into the housing with a press of the red button. We...
  view full answer...
• What Cargo Carrier with Ramp do You Recommend for Transporting My Trike on My Motorhome?
  I have a great solution for you. I recommend the 30x50 Flint Hill Goods Cargo Carrier w/ 48" Ramp - 2" Hitches # FHG77ZR. This carrier provides the interior dimensions you need as well as an integrated ramp. Also, you will need to attach some ratcheting straps to secure your trike like the Erickson # 34413. For theft deterrence, I recommend the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" # 63232. If you need a hitch receiver for your 2008 Tiffin Allegro, I recommend...
  view full answer...
• Length of the Retractable Section of the Erickson Retractable Ratchet Straps, part # 34413
  I went out and pulled a Erickson Retractable Ratchet Straps, part # 34413 from our warehouse to get the dimension you asked about. From the inside of the hook to the nearest portion of the ratchet assembly measures 6-1/2 inches and then from the inside of the hook to the furthest point out on the ratchet measures 10 inches.
  view full answer...
  
• Will Erickson Over-The-Cab Truck Bed Ladder Rack Fit 2016 Toyota Tacoma
  As long as your 2016 Toyota Tacoma does not have the Deck Rail System, the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 will fit well and is a great choice for an over the cab rack. This ladder rack has a clamp-on installation that will not require you to drill into your truck bed. The included installation hardware will clamp around the lip at the top of the truck bed side rails. The rack is made with a sturdy steel construction that features a black powder coat finish to resist...
  view full answer...
• Options for Securing Motorcyle to Trailer
  The Removable Motorcycle Wheel Chock, part # TWSPWM would be an excellent choice for securing the motorcycle to the trailer. The Wheel Chock includes mounting hardware appropriate for a wood trailer floor. Using something like the Motorcycle Assist Straps, part # 06303 along with ratchet straps like part # 34413 would work well for you.
  view full answer...
• Will Curt Aluminum Cargo Carrier Make Noise in the Hitch Because of Folding Mechanism
  The folding mechanism on the Curt cargo carrier # C18100, or anything that folds, does allow a little play and that could lead to some noise. That is just the nature of the beast. The chance for movement and/or noise is greater if the rack is empty. I have seen some people use bungee cords like # EM06664 or #EM06656 to help control movement when the carrier is empty. Something less stretchy, such as a ratchet strap # 34413, is a better option for that.
  view full answer...
• Recommended Tie Down Straps for Use with Erickson Over-The-Cab Truck Bed Ladder Rack EM07707
  For use with the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 Erickson recommends 6-foot cargo straps like # 34413 (rated for a 500-lb working load limit, or WLL) or the higher-capacity set # 34414 which is two straps with a WLL of 1333-lbs each. These straps' 6-foot length is ideal for the type of items typically carrier on a ladder rack. Our main page for cargo control items is linked for you so you can see all that we have to offer. Always select straps based on their WLL...
  view full answer...
• Length of Erickson Re-Tractable Ratchet Straps # EM34416 When Fully Retracted
  When the Erickson Re-Tractable Ratchet Straps, # EM34416, are fully retracted, from S-hook to S-hook they measure 18-1/2 inches.
  view full answer...

Do you have a question about this Ratchet Strap?