bing tracking image
  1. Ladder Racks
  2. Erickson
  3. Over the Bed
  4. Truck Bed
  5. No Drilling Required
  6. 800 lbs
Erickson Truck Bed Ladder Rack w/ Load Stops - Steel - 800 lbs
Erickson

Erickson Truck Bed Ladder Rack w/ Load Stops - Steel - 800 lbs

Part Number: EM07706
In Stock
$296.94
Retail:$326.40
You Save: $29.46
Ladder Racks

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Carry ladders, lumber, and more with Erickson's truck bed ladder rack. Adjustable load stops let you easily secure cargo. Sturdy steel construction. Simple, clamp-on installation. Fits most pickup trucks. Fastest Shipping and Great prices for Erickson Truck Bed Ladder Rack w/ Load Stops - Steel - 800 lbs. Read our customer reviews of Erickson ladder racks. Call 1-800-940-8924 for expert service or order your ladder racks part number EM07706 by Erickson online at etrailer.com.
  • All Info
  • Reviews (67)
  • Q & A (0)
  • Photos

Erickson Ladder Racks - EM07706

Features:

  • Heavy-duty truck bed rack lets you carry ladders, lumber, and more with ease
  • Adjustable load stops ensure cargo is secure
    • Loosen load stop bolts, slide to desired position, then tighten
  • Convenient tie-down cleat on each upright provides place to anchor your cargo
  • Aerodynamic design reduces drag and wind noise
  • Easy installation with patented clamps - no drilling required
  • Universal system fits most truck beds
  • Sturdy steel construction
  • Black powder coat finish resists corrosion, chips, and scratches
  • Corrosion-resistant, yellow-chromate-plated hardware
  • Compatible with bed liners and toolboxes


Specs:

  • Weight capacity: 800 lbs
  • Crossbar length: 78"
  • Overall upright support height: 33-1/2"
  • Upright support base width: 14-11/16"
  • 90-Day limited warranty


Heights

Note: Will not work with tonneau covers. If your truck has a bed liner some alteration may be required to properly install this ladder rack.


Easy, Clamp-On Installation

Clamp on installationClamp on installation close up

Sturdy, user-friendly clamps let you mount this rack to your truck bed without drilling or other modifications. Simply position the bases of the upright supports at the corners of the truck bed and clamp them to lip of the truck's bed rail. Each base is secured to your truck bed rail with 2 clamps.


Crossbar installation

To install the crossbars, slide them into the brackets on the tops of the supports, center them over your truck bed, then bolt them in place.


Sliding Load Stops

Sliding load stops

The load stops can be adjusted along the crossbars to fit your cargo. Simply loosen the bolts on the mounting sleeves, slide the stops to the desired position, then tighten down the bolts. Load stops are designed to prevent loads from sliding around, but they are also great to use as tie-down points for straps (sold separately) when you are carrying lumber, pipes, and other items without rungs that could potentially slide off the rack.


Sturdy Steel Construction

Sturdy steel construction

Steel is highly durable, maintains structural integrity, and does not age or decay as quickly as other materials. A black powder coat finish has been added to help resist corrosion, chips, and scratches and to keep the rack looking new. The nuts and bolts have a yellow chromate plating that helps prevent corrosion.



07706 Erickson Universal Contractor Pickup Truck Bed Rack w/ Load Stops - Steel - 800 lbs



This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.4

67 reviews
Carry ladders, lumber, and more with Erickson's truck bed ladder rack. Adjustable load stops let you easily secure cargo. Sturdy steel construction. Simple, clamp-on installation. Fits most pickup trucks.

by:
2007 Ford F-150

Install wasn’t horrible but I can’t imagine removing it often. The stops naturally don’t slide on the rail but can be relocated without tools which is nice. Seems sturdy.

The cons, it’s steel and has started rusting after two weeks in places the paint wore off during install. I will have to clean it up and repaint it to keep it from looking horrible. In addition, the J bolts sit pretty far off the side of my 2007 F150 so the bracket is hanging off the rim inside about an invh. Once all together it doesn’t seem to matter but would be more comfortable if it sat tight.

Overall, it gets the job done but if looking for pretty, get something that doesn’t rust.

Aaron A. profile picture

Aaron A.

4/11/2020

After a year, the rack looks exactly the same. The surface rust has not gotten any larger. I have noticed that during installation the brackets did bend up the lip of the bed a little but that could be my error or because of the bed liner. Happy with the purchase still.



by:
2021 Ford Ranger

The brackets holding the tube guides used to secure loads do not close tight enough around the pipes to securely fixate them in position. They are too big or the pipe is to small by at least several millimetersI have ordered a plastic sleeve to sliup inside the bracket. Disappointed



by:

The product itself is of good quality. It is a heavy duty truck rack. They say it is adjustable but that is only if you have the wrenches with you. It took several hours to assemble it alone. The bolts need to be a little longer especially on the mounting sleeves and the top of the cross bars. The sliding mounts were quite difficult putting on as the sleeves were very tight, I recommend WD - 40. When it was to the point of installing the cross bars it was necessary to loosen the mounting sleeves and move them. I called customer service and sent several e-mails and received no responses . I plan on using it to carry my kayaks while pulling a travel trailer.



by:
2019 Nissan Frontier

I'm extremely pleased at the way etrailer/Erickson truck rack turned out, and how easy it was to assemble, just one glance at the instructions and I was able to put together without even thinking about it. etrailers videos were also very helpful. rock-solid, no swaying or movement, no noise or sound coming from it whatsoever, very aerodynamic. A great accessory to anyone's truck. Thank you again for a great product. I'll be doing more business with etrailer.com in the future.



by:
2005 Chevrolet Silverado

I bought this strictly for hauling kayaks. The price was great and it is made of metal and not an alloy. Putting it together is a little bit of a pain BUT, once everything is in place and tightened down it is solid! No vibration/shaking from the kayaks/rack as I drive down the road. This is the 3rd time I have ordered from etrailer and have always had someone contact me after the order was delivered to see if I'm satisfied. Excellent customer service and on-time deliveries.



by:
2015 Ram 1500

Great rack for the money. Installation took about 2 hours as I didn't have the right sized ratchet socket pieces in my set. Once on it was great. Solid construction. Took my 14ft stand up paddleboard quite a few times and held up with speeds over 65mph.



by:
2014 Chevrolet Silverado 1500

Packaging could have been better, parts are scratched but it is a ladder rack so not a big deal. Was also missing one of the plastic plugs on the cross bars.



by:

I bought this to make carrying my kayak easier, as it was less than a regular 'kayak rack.' It has also carried bits of camping gear at times. It has performed beautifully and has not interfered with my use of the truck at all. Highly recommended.



by:
2014 Ford F-150

Very pleased with customer service and the product was in excellent condition. On time delivery. Seller was very responsive and accommodating. Highly recommend purchasing from him!



by:

Rack arrived before the expected promised date. Assembly and instructions were simple and easy to follow.. I appreciate the 800 lbs rating and look forward to the additional storage opportunities.



by:

Only took a couple of hours to install by myself. Fairly simple. Should have no problem carrying lumber this summer.

Wes C. profile picture

Wes C.

3/25/2020

One year later and the racks have paid for themselves on saved delivery. These racks are perfect for the DIY guy.



by:

I have a 2001 Silverado with a soft-topper cover on the bed.
I purchased this rack as it was easy to modify so it would go out side and over the soft topper. It’s worked out fine though it’s heavier and stronger than I usually need. I don’t keep it installed on the truck all the time but it only takes about 10 minutes to put on or take off now. I have only carried two kayaks or a 24 foot fiberglass ladder on it so far but will soon use it to pick up some 26 foot PT 2X10 for a deck ab
Nd expect no problems ,as I said this thing is heavy duty. It doesn’t have the prettiest cleanest lines of any rack I’ve seen, but definitely gets the job done without the premium price.



by:

Ladder racks are excellent and customer service is top notch! We have 3 and will continue to purchase from etrailer for our fleet!



by:
2003 Ford F-150

Excellent quality and value for the money. I researched a lot of rack systems and am very happy with this purchase. This is a heavy duty system that should give years of good service. Mounted mine on a F-150 quad cab.

Dave C. profile picture

Dave C.

7/19/2018

Durable and reliable still. One of the Best Buy’s I’ve made.



by:
Ford Five Hundred

I bought this rack to haul two 16' canoes on my truck when I'm pulling our camp trailer. We just finished a 500 plus mile trip to the Sawtooth National Forest in central Idaho. The canoes rode right where I strapped them. The rack, while I was assembling it on my truck, felt a bit shaky. But once everything was tightened up it was rock solid. Easy for one guy to assemble. It can be put together with the side posts in one of two positions depending on whether you want a narrower or wider top surface. The adjustable tie downs are very convenient to get a secure tie. The only word of caution I have is, if you're hauling longer canoes, put foam pads on the edges above the cab of your truck. My experience is, this is a great and affordable rack of good quality.



by:

Rack is extremely strong and easy to install. I used it to support two ladders, 16 ft. and 23 ft. for months. Never any problems with movement or slippage. I noticed a little inconsistent paint coating around the tie downs on the arms. I have small spots of rusting around them. When asked, I suggest this rack to my fellow workers for their vehicles.



by:

I had hoped that the rack would offer a little more height to allow my canoes to clear the cab of my truck. With a little bit of work I came up with a satisfactory solution. The truck has been waiting for a rack for several years. The Erickson rack certainly serves my purpose and is a well made product.



by:

Great product! Easy to put together,well made and extremely sturdy. And shipping was very fast!



by:
2013 Dodge Ram Pickup

Fit great! Good quality! Does what I expected it to.



by:
2005 Chevrolet Silverado

Works great for what I needed. Thanks for the fast service.



by:
2019 Nissan Frontier

Easy to install, looks strong, ready to work



by:

Rugged material, right for the price and easy to Install. Purchased for use with multiple MFG truck beds so far no complaints.



by:
2016 Dodge Ram Pickup

Easy to install (takes about an hour) good quality for the price. using it to carry ladders during the week and kayaks on the week-end. I have a 2016 Ram 1500 with an 8 ft bed, but the rack is pretty universal.



by:

Sturdy rack. Because it was a somewhat generic fit I had to modify my truck bed lining to get the rack to fit. Was not very difficult. I’ve had zero problems with this rack over the last year. I expect it to last many more years. Great item for the price



by:
2009 Dodge Ram Pickup

1) The black paint has rusted thru in many areas.

2) The J hook bed rail clamps do not align well .

3) The rope cleats are too small for anything larger than twine.

4) Welds and finish are marginal.

I regret the purchase and have removed the item.


25
67
Show More Reviews

See what our Experts say about this Erickson Ladder Racks

  • Dimensions of the Frame Clamps for the Erickson Truck Bed Ladder Rack
    The manufacturer does not provide the dimensions you are inquiring about so I went out to our warehouse and measured the Erickson Truck Bed Ladder Rack w/ Load Stops part # EM07706 for you. The upright from tip to tip is 29-1/4" tall. The clamps are 14-3/4" long x 3-1/4" wide at the top x 1-1/2" wide on the side. I have attached a photo with these dimensions for you as well.
    view full answer...
    Image 1 for Image 2 for
  • Will the Erickson Ladder Rack EM07706 Fit a 2008 Toyota Tundra Crewmax
    As long as your 2008 Toyota Tundra doesn't have the Deck Rail System the Erickson Ladder Rack part # EM07706 would be a confirmed fit. I attached a review video for this rack for you to check out as well.
    view full answer...
  • What Ladder Rack and Soft Tonneau Cover will Work on My 2025 Toyota Tundra?
    Hello John, Congrats on the new 2025 Tundra SR! Unfortunately, we do not have an over the cab ladder rack that will work with a tonneau cover because of how they are installed, they have to clamp to the inside of the bed. Basically you need a stake mounted ladder rack, and then a tonneau cover that installs on the inside of the truck bed. Your best option would be to go with the Adarac Aluminum Series Custom Truck Bed Ladder Rack - 500 lbs - Matte Black # A85AG, or for silver # A25AG....
    view full answer...
  • Truck Rack to Haul 2 Kayaks on2018 RAM 2500
    To haul two kayaks on a pickup truck rack system that does not over hang past the cab, and does not use the hitch receiver you will need a full rack on the bed of the truck. Consider the Erickson # EM07706 truck bed rack that supports 800 pounds!
    view full answer...
    Image 1 for Image 2 for
  • Will a 12 Foot Aluminum Boat Fit on Erickson Ladder Rack # EM07706
    It is likely that your 12 foot aluminum boat will fit between the load stops on the Erickson ladder rack # EM07706. The crossbars on this rack are 78 inches long and you could mount the load stops on the outside of the ladder rack uprights for even more adjustability. Take a look at the video I have linked showing the rack on a 2013 F-150. Technically you could put anything on the Erickson truck bed ladder rack # EM07706 as long as it is within the 800 pound weight capacity and the load...
    view full answer...
  • Can an Aluminum Boat be Loaded onto the Erickson Truck Bed Ladder Rack
    Technically you could put anything on the Erickson truck bed ladder rack # EM07706 as long as it is within the 800 pound weight capacity and the load was properly secured. On a boat you will need to secure the bow and stern so I recommend tie down kit # TH855XT.
    view full answer...
  • Will Two Kayaks Fit Side By Side on Erickson Ladder Rack Installed on a 2015 GMC Sierra 2500
    When installed in your 2015 GMC Sierra 2500 the uprights on the Erickson ladder rack # EM07706 will be approximately 57 inches apart, about the same with as the inside width of the bed. When placed side by side the kayaks will be 52 inches wide so it shouldn't be a problem.
    view full answer...
  • Diameter of Erickson # EM07706 Truck Bed Ladder Rack Uprights
    According to the nice folks at Erickson Manufacturing, the steel tubing that the ladder rack uprights are constructed of measures 1.9 inches (48mm) in diameter. I've provided a photo showing some other dimensions you might find helpful. I've also linked you to a product description video which you can see by clicking the provided link.
    view full answer...
    Image 1 for
  • Ladder Rack Options for 2016 Toyota Tundra w/ Bed Rail System
    We do have some ladder racks that are compatible with your Tundra that's equipped with the bed rail system. The most economical choice would be the the Rola # 59799 T3 Truck Bed ladder rack. The rack system includes adapters that allows it to attach to the bed rail system without needing to drill into your brand new truck. The rack has an 800 lb capacity. TracRac offers the TracRac SR Sliding Ladder Rack, part # TH43002XT-610 that has a 1250 lb capacity. This rack is also compatible,...
    view full answer...
    Image 1 for
  • Ladder Rack for 2016 Ram Rebel
    We do have a product that can carry that large of a ladder on the roof of your 2016 Ram Rebel. Part # EM07706 is a great solution and it fits any bed length on Rams. However, this part doesn't work if your truck has Ram Boxes on the bed. Part # DZ95053 is designed for bed six and a half feet and longer, so it won't work for your application.
    view full answer...
  • How to Carry Kayaks With 2006 Dodge Ram Mega Cab
    We have a couple of options for you, though I checked with all the roof rack manufacturers and there are no clamp-on roof rack fits for your 2006 Dodge Ram Mega Cab. If you did want to go with a roof rack, the only option is from SeaSucker, which is a vacuum-mounted rack, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. This is just as strong as a standard roof rack, using vacuum cups that attach to your roof which makes it really easy to take on and off so it's really convenient. The...
    view full answer...
  • Diameter of Croassbars for Erickson Truck Bed Ladder Rack
    The crossbars on the Erickson Truck Bed Ladder Rack - 500 lbs # EM07706 measure 1.8" in diameter. We have reached out and confirmed this with Erickson in the past. Attached is a review video for you to check out.
    view full answer...
  • Truck Bed Ladder Rack for 2016 Toyota Tundra 5-1/2 Bed with Deck Rails and BAKFlip Tonneau
    That's a tall order, but the good news is that I do have one option that will allow you to carry your kayaks above the bed of your 2016 Toyota Tundra with the Deck Rail system and BAKFlip tonneau cover installed. Take a look at the Adarac Aluminum Series Custom Truck Bed Ladder Rack # A4001665. It will work with the BAKFlip MX4 # BAK48409T, BakFlip FIberMAX # BAK126409T, BAKFlip G2 # BAK26409T and BAKFlip F1 # BAK72409T because they are all designed to fit inside the bed rails of your...
    view full answer...
  • Ladder Rack Height for MaxxTow and Erickson Ladder Racks for a 2006 GMC Canyon
    If you check out the picture I attached of the MaxxHaul Truck Bed Ladder Rack MT70386 installed you can see that this rack sits very tall on the back of the truck. The overall height is 45 inches. For a lower height ladder rack that is also cost-effective the Erickson Truck Bed Ladder Rack # EM07706 has been confirmed as a fit for your 2006 GMC Canyon with a 5 foot bed and only sits 33-1/2 inches tall.
    view full answer...
    Image 1 for
  • Diameter of the Crossbars of the Erickson Truck Bed Ladder Rack # EM07706
    The crossbar dimension for the Erickson Truck Bed Ladder Rack, part # EM07706 measures 1.8 inches diameter.
    view full answer...
  • Bed Rail Solution for a Roof Top Tent on a 1999 Dodge Ram 1500 Quad Cab
    I have a solution for you, however there aren't any confirmed in the bed rail fits for the 1999 Dodge Ram 1500 Quad Cab that can support the weight of the tent plus occupants. The Inno Bed Rail rack, part # INRT101 is only rated for 190 pounds, so it would likely fail if you got into the tent while equipped. Instead, I recommend the Erickson # EM07706 truck bed ladder rack rated for 800 pounds and uses traditional shaped crossbars, giving you the best chance of compatibility with the...
    view full answer...
  • Recommended Cost Effective Truck Bed Ladder Rack for a 2017 Toyota Tacoma With Deck Rails
    I do have a ladder rack that will work with the deck rail system on your 2017 Toyota Tacoma but the Erickson Truck Bed Ladder Rack part # EM07706 will only fit models without the deck rail system. For a system that is similar and compatible with your vehicle I recommend using the Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799 as this is the most cost effective ladder rack system we have for you. The Haul-Your-Might has a set of aerodynamic elliptical shaped load bars designed...
    view full answer...
    Image 1 for
  • Where is Drilling Required to Install Erickson Ladder Rack on a 2006 Chevy Colorado with 6 Foot Bed
    There is no drilling required to install the Erickson Ladder Rack # EM07706 on your 2006 Chevy Colorado. Once installed the crossbars of the ladder rack will be higher than the roof of the truck cab.
    view full answer...
  • Carrying Two Kayaks on 2018 Chevy Colorado That is Towing a Trailer
    While I like that you're thinking of alternatives, what you are proposing is not going to work because a dual hitch extension such as the MaxxTow # MT70066 will reduce the capacity of your 2018 Chevy Colorado's hitch by half - including the tongue weight. I am unsure of the exact roof rack you have on your '18 Colorado but you may be able to put a kayak carrier directly on the roof if your crossbar spread is enough. For example, the Thule's The Stacker # TH830 if the crossbars on your...
    view full answer...
  • Will Erickson Truck Bed Ladder Rack Fit 2001 Ford F-150 Super Crew
    Yes, the Erickson Truck Bed Ladder Rack # EM07706 is confirmed to fit the 2001 Ford F-150 with either the 5-1/2, 6-1/2, or 8 foot bed.
    view full answer...
  • Recommended Truck Bed Ladder Rack For a 2016 Toyota Tacoma with 6' Bed
    The Erickson Truck Bed Ladder Rack w/ Load Stops # EM07706 is a universal rack that was designed for full size trucks. So while this will fit to your 2016 Toyota Tacoma it will sit higher and stick out further on the sides than what is necessary. This will create additional wind noise while driving which may be distracting. For your Tacoma I would recommend looking at the T-Rac Pro2 Ladder Rack # TH37005XT. This rack was designed for mid size trucks like your Tacoma so it will sit at the...
    view full answer...
  • Will the Erickson Truck Bed Ladder Rack # EM07706 Fit on a 2017 Chevy Colorado with Bed Liner
    If your bed liner on your 2017 Chevy Colorado doesn't move then the Erickson Truck Bed Ladder Rack # EM07706 should work just fine. Liners that move around will need to be removed or modified though since you want the ladder rack as secure as possible. Another option we have that mounts to your stake pockets is the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000950. This is more of a custom fit and features legs that can be repositioned or removed based on your needs. Since this...
    view full answer...
  • Truck Cap Ladder Rack to Fit a 2014 Ford F-150 STX with a 5-1/2 Foot Bed
    We do have a ladder rack for your 2014 Ford F-150 that will fit on a truck cap but the Erickson # EM07706 does not. It will work great on your truck but not with the cap. It installs inside the bed rails. However, the TracRac # TH29200XT will work on a truck cap. You'll need to drill into the cap to mount the brackets. Then the slotted, aero crossbars install into the brackets.
    view full answer...
  • Buyers Truck Bed Ladder Rack Crossbar Length for 2014 Ram 1500
    I checked with Buyers and the bars on the Buyers ladder rack part # 3371501680 are 66 inches long. The ladder rack is a fit for the 2014 Ram 1500 with a 5-1/2 and 6-1/2 foot bed without RamBox. It also fits the 8 foot bed. If you are looking for longer crossbars, I recommend Erickson Truck Bed Ladder Rack part # EM07706. The crossbars on the Erickson Ladder Rack are 78 inches long.
    view full answer...


< Previous



Do you have a question about this Ladder Rack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video by:
Zack K
Employee Andrew K
Video by:
Andrew K
Employee Thomas T
Video by:
Thomas T
Employee Tyler C
Edited by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Hayden R
Test Fit:
Hayden R
Employee Jared G
Test Fit:
Jared G
Employee Andrew S
Test Fit:
Andrew S
Employee Robert O
Test Fit:
Robert O
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B
Employee Matthew S
Written by:
Matthew S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<