Recommended Ladder Rack w/a Easily Removable Rear Crossbar for Loading the Bed
Updated 09/21/2026 | Published 09/16/2026 >
Products Featured in This Question
Question:
So I have a 2022 Toyota Tundra Platinum with a 66inch bed. What would this rack EN M07707 weigh? Additionally, is the back bar removable? On my 1998 Dodge 2500 Ram the bar is removable for loading and unloading, enabling me to go in and out of the truck without bending over. What say you?
asked by: Clayton C
Expert Reply:
Welcome back Clayton. The Erickson Over-The-Cab Truck Bed Ladder Rack item # EM07707 weighs 160 lbs. It will fit the 66" bed on your 2022 Toyota Tundra. It has a 1,000 lbs weight capacity.
The rear bar at the back of the Erickson Ladder Rack item # EM07707 is removable but it's not that easy of a process. You have to remove four bolts on either side and you must reinstall the rear bar before you drive away because it structurally supports the entire ladder rack. I attached a diagram below that'll show you what all is involved with removing the rear bar.
As an alternative, I recommend the Buyers Products Over-The-Cab Truck Bed Ladder Rack item # 3371501150. It has an easily removable rear crossbar and is noticeably lighter at 144 lbs. This ladder rack also extends over the cab and has a 1,000 lbs capacity.
Besides the obvious, what do you plan on hauling in your new ladder rack? Feel free to answer this and throw in any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Buyers Products Over-The-Cab Truck Bed Ladder Rack - Black Steel - 1,000 lbs
- Ladder Racks
- Truck Bed
- Fixed Rack
- Crossbar Rack
- Not Tonneau Compatible
- Over-Cab Height
- 1000 lbs
- Over the Cab
- No Drilling Required
- Buyers Products
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Tail Lights for a 2008 Featherlite 4926 Car Hauler Trailer
- Q&A: Recommended Hitch for a 2025 Subaru Forester Hybrid
- Q&A: What are the Correct Bearings and Races for Dexter 8-201 Electric Drum Brakes?
- Q&A: Bearing Buddy Grease Caps for Hub Bore Dimension of 2.05-Inches
- Q&A: Replacement Hub for Harbor Freight 4 x 8 Trailer
- Q&A: Replacement Hub For A Trailer With A BT8 Spindle
- Article: Best Ladder Racks
- Q&A: Comparing Trailer Brake Magnets # BP01-225 and # BP01-180
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices




Clayton C.
9/20/2026
Jeered H- Thanks for getting back to me. I have a correction to make. It looks like I initially said my bed is 66 inches, however, it is actually 6‘6“ or 6 1/2 feet. Given this new information would the part numbers you have provided change and would the weight be different? Thanks, Clay