1. RV Vents and Fans
  2. Ventline
  3. Roof Vent
  4. With 12V Fan
  5. Vent
  6. 14W x 14L Inch
Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim

Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim

lowest price pledge
Our Price: $107.03
You Save: $50.22
RV Vents and Fans
This item qualifies for Free Shipping
Shipping Weight: 5 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Product Expert Adam Y

Is this right for you? Product Expert Adam Y says:

Yes, if you:

  • Like to boondock and need a more energy efficient fan
  • Are looking for more of an off-white interior garnish ring to match your ceiling
  • Want to remove your bug screen to clean it and have quick access to your fan for maintenance

No, if you:

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank. Lowest Prices for the best rv vents and fans from Ventline. Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim part number V2094SP-28 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (776)
  • Q & A (52)
  • Photos
  • Why etrailer?

Ventline RV Vents and Fans

  • Roof Vent
  • With 12V Fan
  • Vent
  • 14W x 14L Inch
  • White
  • Manual Lift
  • Ventline

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.


  • Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
    • Simple to upgrade from non-powered model
  • Basic, hand-operated crank rotates to open and close dome
  • Switch to turn the fan on/off is mounted on the vent
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Birch White interior trim piece (or garnish) is included
  • Made in the USA


  • Included garnish fits roofs 1-7/8" to 3" thick
    • Garnish leg length (depth): 2-1/8"
    • Garnish color: Birch White
    • Other garnish sizes are available (sold separately)
  • Fan power: 12-volt DC
    • 100 CFM
  • Cover color: white
  • Rough opening size: 14-1/4" wide x 14-1/4" long
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10" Open
  • 2-Year warranty


  • Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
  • Not for use above tubs, showers or range cooking surfaces.


V2094SP-28 roof vent

Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Remove screen frame and wiring compartment cover to make electrical connections.
  7. Connect to 12-volt DC power source
  8. Replace screen frame and cover.
  9. Attach interior garnish piece with #8 screws.

V2094SP-28 Ventline Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White - Birch Garnish

Item # V2094SP-28

Customer Reviews

Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim - V2094SP-28

Average Customer Rating:  4.8 out of 5 stars   (776 Customer Reviews)

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.

- V2094SP-28

Five stars to E-Trailer for processing my order same day and getting it on UPS Ground where it took the three days to get delivered in time for my install on the weekend. I'm assuming this product deserves 5 stars as well since it is what it was advertised to be. My only minor ding is for the two missing screws that are needed to hold the screen in place. The $20 for the 'installation kit' shipped a tube of urethane caulking two sets of screws, one for the mounting topside (plenty, thank you) and the bottom ones for the trim. But did not see the short 1/2"? for the screen. I had to use my old ones, one of which fell down a floor vent so I need to hit up a hardware store for it. The vent went in with little effort. Just took my time scraping off the old caulking and used plumbers putty, instead of the caulking for under the flange (in case I have to rip this up again). The tube provided just enough for a thick coat of goo to cover the flange and where it meets the roof. I have a rubber roof, so this was perfect. I'll rate the other things I purchased once I install and use them.

How quiet is the fan? We have a new fan and low is extremely noisy. Is this because the blades are plastic?
-- comment by: chris - 05/31/2015

Chris, I cant comment on the actual use of the fan since I have not hooked it up to a battery to test it yet. We were planning on using it the week after the install, but stuff came up. Sorry I cant answer it. If youre patient, Ill respond once I do get around to it.
-- comment by: Eric B - 06/04/2015

The vent is working fine. It makes about the same amount of noise as the original one did. The knob is a little shorter than the original crank, so a little harder to reach for my wife, whos shorter than me. The vent works very good. Just ordered another one minus the fan for the front of the trailer.
Eric B - 05/26/2016

- V2094SP-28


Kim - 10/23/2020

- V2094SP-28

Not so impressed with the lack of insulation on the connections to the motor and the wires that will be exposed to UV the motor looks less than adequate but time will tell.

- V2094SP-28

I was a bit disappointed with this. It appears well made, but the material is thin and the fan is too small to be really effective. I think I'll return it and pay more for a better one. I like simple, but in this case it looks like I'll have to get more bells and whistles to get a more robust unit

Thank you for your review. This vent is more basic. If you are looking for an upgraded version here is a link to our ion to filter through.
-- Etrailer Expert Sierra K - 02/01/2021

- V2094SP-28

We ordered these products to replace vent covers that were recently damaged in a hail storm. From the moment I placed the order, the staff at etrailer.com stayed in contact with me via email to let me know exactly when we could expect shipment. The vent covers were received in good order.

- V2094SP-28

The interior trim was not correct for me application. The flange was not tall enough and did not cover the roof joists. I had to re-use the old one to cover the gap from the ceiling to the vent.

- V2094SP-28

I had a very good experience with Etrailer.com. Sales person was knowledgeable with products, listened to My needs and quickly set up my order. I received my parts and only had one problem, I had base on a vent bent which was quickly straightened. I will definitely order all parts I can from etrailer. I will send pictures finished project, I’m replacing complete floor and roof. I decided to go ahead and replace all vents! Thank You!

- V2094SP-28

I really liked that you kept up with the shipment and you were so very informative concerning the delivery. I will update as complete the installation.

- V2094SP-28

Got them in time still have to install them

- V2094SP-28

Good quality products. They are exactly what I thought I ordered. It is complete and the fit and finish is excellent. I have to replace the old vents in my trailer. I was impressed with how quickly everything arrived. So very nice to have free shipping etrailer.com. I talked to a person before I confirmed my order just to make sure I was buying what I needed. She was very helpful and courteous. I will definitely be buying from etrailer again and telling my friends about it.

- V2094SP-28

It is hard to find products of this quality and at a great price. RV or Camper equipment is so expensive, so thank you for your products. Would recommend others check out this company. Thanks again.

- V2094SP-28

Received my order for three vent assemblies for my fifth wheel and everything was as ordered and the shipping was very fast. I will continue to use Etrailer for all my RV needs. Their service is excellent and the web site is easy to order from.

Ive had the product a year and everything is working great!
Larry Y - 06/05/2016

- V2094SP-28

This is a great vent/fan. It went in quickly and hooked up easily. I replaced a vent without the fan, but my rig was wired for a dc fan. so it was an easy hookup. A good quality unit, fan is quiet and works well. The package was delivered in 3 days, 1 day ahead of schedule. I will definitely use etrailer again.

- V2094SP-28

This vent fit my need perfectly to replace a damaged, rusty and irreparable one in my 50 year old newly purchased camper. Etrailer.com was easy to find and order and they were very prompt with my order. The vent was easy to install and once I sealed it according to their instructions and with additional roof work being completed I have no more roof leaks! I also have a good looking, easy to use vent for my camper. I will be doing more business with this company in the future as I tackle other repairs on my camper. Thanks etrailer.com!

- V2094SP-28

The Ventline Ventadome Trailer Roof Vent w/12V Fan worked out very well. The installation was quick and easy. The fan operates as expected and the new style knob works well to open the lid.

- V2094SP-28

The fan was everything I expected, it fit right in the location of the old one. Works very well! I am very satisfied with the purchase, the shipping time and the product.

- V2094SP-28

Ordered leaf springs for my flatbed trailer, site was easy to use prices and shipping were the best and my order arrived on time and in good condition. Thanks e-trailer I will definitely order from you again!

- V2094SP-28

Easy to change out, great fit.... thanks for having the best parts for campers

- V2094SP-28

Excellent product! Easy to install and works like a charm. Particularly liked being able to cut the trim piece to fit depth of ceiling. The hardest part was removing the old one! Will buy other products from this company. Great service, quick delivery, exactly what was ordered. Well done! Thank you, Charles Lewis

Excellent product. Easy install and operation. Operates quietly and efficiently.
Charles L - 04/12/2017

- V2094SP-28

Happy to have these replacements in. The white is a good opaque and the turn handle is easy to operate. Finally have lit areas again.

- V2094SP-28

The Ventline Roof Vent is a very good vent. I used it on my enclosed cargo trailer. Should I ever need another roof vent, without a doubt, it would be Ventline.

- V2094SP-28

I was happy to find the roof vents I needed on etrailer. Other sites did not have them. Called their number and was greeted by very courteous and knowledgeable person. Very helpful. I ordered two vents and they were at my front door 2 days later. Can’t recommend them enough. Their web site is on my homepage now for future part needs.

- V2094SP-28

Great service and product, i am extremely happy with product and the prices at etrailer. The vent fan was easy to install and works/looks great great company,thank you.

- V2094SP-28

Received my new fan for my trailer was easy to install and a very good quality product came with everything that I needed to install it on my toy hauler thank you again and I appreciate your products

- V2094SP-28

Product worked great in my 91’ Dutchmen fifth wheel, and now I have a fan where I didn’t before!

Show More Reviews

Ask the Experts about this Ventline RV Vents and Fans

  • Replacement Wall Switch Kit for Ventline Northern Breeze 12V Powered Vent
    Northern Breeze trailer vents like your 12V powered model are made by Ventline, which is a primary vent maker in the RV market. We offer four models of 14 x 14-inch 12V-powered Ventline roof vents you can see on the linked page. We do offer a replacement wall switch kit, items # VC0533-03-A in white and # VC0533-02-A in black that will offer you a much more cost-effective repair option than an entire new roof vent. I recommend that as you prepare to install your preferred color of...
    view full answer...
    Image 1 for
  • Replacement Motor for Ventline Roof Vent V2525MP-01
    I spoke with my contact at Ventline regarding a replacement motor for your Ventline Roof Vent V2525MP-01. He stated that this particular model is no longer being produced and there is not a replacement motor available. I recommend replacing the entire vent assembly. I have attached a link that will take you to our available selection of vents with 12 volt fans that you can look through. You will just want to measure the rough opening size in your trailer to ensure a correct replacement....
    view full answer...
  • Replacement Crank for Ventline Northern Breeze V2401
    I may have a solution for you, but we don't have a specific replacement crank available for the Ventline V2401 Northern Breeze. With that said, you may be able to use the Metal Vent Crank- 1" # 37220305 which replaces a worn or broken vent crank with a 1" long shaft. If you wanted to change out your vent completely, 14-1/4" x 14-1/4" is the standard size so you could use the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" # V2094SP-28 to replace your old vent....
    view full answer...
  • Recommended 12V Powered Roof Vent to Replace Ventline Northern Breeze V2501
    My contact at Ventline confirmed that the issue you're having with your model V2501 Northern Breeze 12V fan is related to the controller circuit board. The switch itself is not the problem. Unfortunately, he advised that replacement circuit boards are no longer available as this item went out of production back in 2009. In this case you'll need to install a new fan assembly to replace the existing unit. You can use the linked page to review all powered trailer roof vents available...
    view full answer...
  • Recommended Trailer Roof Vent Cover for Ventline Ventadome V2094SP-28
    According to MaxxAir, their # MA00-933066 Standard RV Roof Vent Cover would be compatible with a Ventline Ventadome # V2094SP-28 and other standard 14 x 14 inch roof vents. The cover includes a bug screen to keep out unwanted pests and is manufactured int he USA.
    view full answer...
  • Recommended Trim Ceiling Garnish for Ventline Ventadome Trailer Roof Vent
    The Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim # V2094SP-28 has different length ceiling garnish pieces available. This is dependent on the size gap you have. In the birch white we have: Ceiling Garnish for Ventline Roof Vent - 3-1/8" Leg # VA0445-27 Ceiling Garnish for Ventline Roof Vent - 4-1/4" Leg # VA0445-28 Ceiling Garnish for Ventline Roof Vent - 5-1/8" Leg # VA0445-29
    view full answer...
  • Amperage Draw of Ventline Ventadome Trailer Roof Vent Motor
    The amperage draw of the motor that comes with the Ventline roof vent motor part # V2094SP-28 is 1.2 amps at 13.6 volts.
    view full answer...
  • Locating Replacement 16 Inch x 16 Inch Vents for 2005 Damon Daybreak
    We do have a large selection of RV vent assemblies available, most of which feature the standard 14 inch x 14 inch measurement, which refers to the rough opening size. If the 16 inch measurement you mentioned in your question is by chance being measured from the outside of the garnish, these options may work well as replacements. For example, the Ventline Ventadome Trailer Roof Vent (without fan) # V2092SP-29 fits a rough opening size of 14-1/4 inches wide x 14-1/4 inches long, however...
    view full answer...
  • Replacement Operator Knob for Ventline V2094 Trailer Roof Vent
    We offer a complete range of trailer vent replacement parts as well as entire vent assemblies. I linked our main page for vent replacement parts. For a replacement handle for a Ventline vent model V2094 you can use Replacement Plastic Operator Knob # BVD0421-15. If the inside splines of your knob are stripped then the new one should get you going again. If you do not have the original mounting screw that secures the knob then you can use part # V0423-01. If you need the entire...
    view full answer...
  • Does Lid of Ventline Need to be Open to Allow Outside Air to Vent
    Yes, you would need to open the vent lid of the Ventline Northern Breeze part #V2094SP-28 to be able to allow it to pull air out of the trailer.
    view full answer...
  • Do the Screws that Hold the Motor for Ventline Vent V2094SP-28 Install from the Top or Bottom
    The motor for the fan in Ventline vent # V2094SP-28 attach from the bottom or inside of the trailer. The replacement motor is # BVD0218-00. I have included a diagram of you showing how the parts go together on that vent.
    view full answer...
    Image 1 for
  • Recommended Electric Replacement for Manual Trailer Roof Vent
    The trailer roof vents are all the same size so you can replace them rather easily. I recommend the Ventline Ventadome Trailer Roof Vent part # V2094SP-28 for white or part # V2094SP-34 for smoke. These options both have an electric exhaust fan with integrated controls.
    view full answer...
  • Replacement Trailer Roof Vent with Ventline V2094 Vent on 1991 Dutchmen Classic Trailer
    Yes, vent assembly # V2094SP-28 will fit in place of the old vent you have. The rough opening size for most roof vents including this one is 14-1/4 inches square. But I stress the "rough" part of rough opening because it can be a little off from 14-1/4 inches. I also recommend installation kit # 344270KITW which includes hardware, Butyl tape, and sealant.
    view full answer...
  • Will Ventline Fan Replace Fan in 2014 Winnebago 27RBDS
    To find out if the Ventline Ventadome Roof Vent, part # V2094SP-28, is a fit for your 2014 Winnebago you will need to take some measurements. The Northern Breeze RV Roof Vent Fan fits an opening that is 14-1/4" long x 14-1/4" wide. If your current vent has a rough opening size of 14-1/4 square inches then this fan will work for you without cutting or significant modification. To install the vent I also recommend the installation kit, part # 344270KITW.
    view full answer...
  • Install Hardware Needed for a Ventline Roof Vent on a Trailer
    For a kit that comes with all the install hardware you would need for the Ventline Ventadome part # V2094SP-28 you would want the part # 344270KITW. This comes with all of the screws you would need plus the sealant needed to seal out water. The vent itself does not come with this. I attached an install video that shows a similar roof vent being installed.
    view full answer...
  • Replacement Roof Vent Recommendation for Camper with Bad Circuit Board
    We do not have any replacement roof vent circuit boards so our best option would be a new bathroom vent setup. A very popular option for that is the Ventline Ventadome roof vent part # V2094SP-28 which is designed to fit 14 by 14 inch rough cut openings like what is commonly found in RV roofs.
    view full answer...
    Image 1 for
  • Recommended Replacement For A 2006 Keystone Montana Roof Vent
    Based on the design of the pictures you sent in it looks like a Ventline. I spoke with a Ventline tech and due to the older model design of your unit and with it being exposed to the elements you would need to replace the whole unit. If you just want a simple manual lift vent I recommend the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim Item # V2094SP-28. If you want a powered fan then I recommend the Ventline Ventadome Roof Vent w/ 12V...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Vent Fan And Ceiling Garnish For Roof That Measures 5-1/2 Inches Thick
    If you find that you have a 14-1/4 inch roof vent we have just what you are looking for. We do not have a complete all-in-one kit for a roof that is 5-1/2 inched thick but we do offer an addistional garnish that will work for you. I recommend the Ventline Ventadome Trailer Roof Vent w/ 12V Fan, part # V2094SP-28. For the garnish I recommend part # VA0445-37. This will let you mount the fan on a roof between 4-7/8 to 6-inches thick.
    view full answer...
  • Can Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-28 Install On Roof Thickness of 2-13/16
    Looks like you have a roof thickness of right at 2-3/16 inches like you mentioned which isn't a problem at all to install the Ventline Ventadome Trailer Roof Vent # V2094SP-28 that you referenced. This comes with a garnish that is 2-1/8 inches tall so you'd only really need to lightly trim it shorter for it to match perfectly to your roof thickness.
    view full answer...
  • Replacement Vents for a 2008 Cherokee Gray Wolf Travel Trailer
    Trailer manufacturers could use any brand of vents on a given trailer. So to determine if the Ventadome vents # V2094SP-28 and # V2092SP-28 will fit you have to measure the existing vents. The vents both fit in 14-1/4 inch square openings. Longer garnishes are available. # VA0445-37 is 5-1/8 inches # VA0445-35 is 3-1/8 inches These garnishes can also be trimmed some for a better fit.
    view full answer...
  • Replacement for Ventline Roof Vent V2094
    It sounds like you might be looking to replace a Ventline Roof Vent V2094 and if that is the case we do have the correct one, the Ventline Ventadome Trailer Roof Vent part # V2094SP-28. That said, you also will need the Ceiling Garnish for Ventline Roof Vent part # VA0445-28 (trim to fit) due to the roof thickness. If this was not the info you were looking for please just let me know.
    view full answer...
  • Installation Kit For Trailer Roof Vent With Sealant And Screws
    We do have the exact kit you will need in order to install a roof vent on your travel trailer, with the correct part being the following: - Roof Vent Installation Kit # 344270KITW This kit has everything you need; two tubes of sealant, both sheet metal and wood screws, as well as butyl tape. I have added a link below to a video review for you to check out as well if you'd like.
    view full answer...
  • How to Determine Size of Replacement Vent for Trailer
    We do have replacement vents that will likely fit your trailer but don't have any way of knowing the size of the opening of your trailer and there is nothing specific. In order to determine what will fit you will need to measure the size of the opening, and if it is the standard 14" x 14" there are numerous options. Since that is the standard today, if it isn't that size you may need to enlarge the hole if it is smaller. This will allow you to use a number of different vents, like the following: -...
    view full answer...
  • Will MaxxFan Deluxe Roof Vent # MA00-05100K Let In a Lot of Light
    The MaxxFan Deluxe Roof Vent # MA00-05100K will let in more light than your AC unit did but not as much as a more traditional model such as # V2094SP-28. One thing is for sure: you will have more light with a roof vent/fan than you do with your AC up there!
    view full answer...
  • Replacement Ceiling Garnish for Roof Vent
    It sounds like you're looking for the ceiling garnish for a standard roof vent like # VA0445-34. I've linked our selection for you. Just choose the color and the measurement of the leg you need. The leg is essentially how tall the garnish is. If you can't find one the exact size you need you can purchase a larger one and cut it down to size. If you're looking for the complete vent assembly our most popular is the Ventline # V2092SP-28. It's a manual lift vent. If you need a...
    view full answer...
  • Replacement Vent for Ventline Northern Breeze Model V2501 with Bad Circuit Board
    Any circuit boards included in a fan would definitely be brand and/or model specific so I checked with Ventline for a replacement for the board in your Northern Breeze V2501 fan. Unfortunately, Ventline no longer has stock of those circuit boards. So, a new fan is in your future and we can help. You can use the linked page to see all roof vents from Ventline and others. Just click on the type of powered vent you have, 12DC or 110VAC, to see complete vent assemblies. Most square trailer...
    view full answer...
  • RV Roof Vent Fan Recommendation for 1999 Holiday Rambler Endeavor 37WDS Without Thermostat
    You can easily replace the thermostatically controlled RV ceiling fan you have in your 1999 Holiday Rambler Endeavor 37WDS with one that does not have that feature. We have the Ventline Ventadome Trailer Roof Vent part # V2094SP-28 which fits the standard 14 inch by 14 inch rough cut RV roof opening and has a fan without a thermostat.
    view full answer...
    Image 1 for
  • Does Ventline Metal Roof Vent # BV0534-00 Fit Ventline Roof Vent # V2094SP-28
    Yes, the metal vent lid cover part # BV0534-00 is designed to fit the Ventadome style of Ventline roof vents like the part # V2094SP-28 you mentioned.
    view full answer...
  • Can a Fan be Added to a Ventline Roof Vent
    You may be able to add a fan to your Ventline roof vent without removing it but it all depends on what part number you have. I spoke with my contact at Ventline who said that the VD0433 number you gave me is only for the screen on the vent. If you have the part # V2110SP-24 that has the metal roof then my contact said that there is no way to modify it for a fan. If you have the part # V2092SP-28 then there is a way that you could add a fan. The Replacement 12V DC Motor # BVD0218-00...
    view full answer...

Do you have a question about this RV Vents and Fan?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Raymond P
Written by:
Raymond P
Employee Jacob T
Video Edited:
Jacob T
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Isabelle B
Updated by:
Isabelle B
Employee Kathleen M
Video by:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-1624