Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2010 Land Rover LR4
We'll connect you with nearby partnered installers who know this exact setup.
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
Part Number: TH43002XT-782
In Stock
$1,549.90
2010 Land Rover LR4
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (174)
- Q & A (0)
- Photos
Thule Ladder Racks - TH43002XT-782
Highlights
- Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
- Sliding Adjustability: Move the uprights anywhere along the bed to fit long or short loads.
- High Load Capacity: 1,250-lb rating easily handles ladders, lumber, and construction gear.
- Quick Removal: Uprights detach fast for full bed access or tall cargo clearance.
- Rustproof Strength: 6000-series aluminum with dual powder coat resists corrosion and scratches.
- Secure Tie-Downs: Includes 4 load stops and 4 side cleats to keep cargo firmly in place.
Features to know about
Haul Long or Oversized Loads: Sliding Bed Rails Keep Gear Secure
The Thule TracRac SR Sliding Truck Bed Ladder Rack carries up to 1,250 lbs and slides the full length of your truck bed so you can position the uprights exactly where you need them. Whether you’re hauling ladders, lumber, or a kayak, the quick-release knobs let you move the racks forward or back in seconds. When you’re done, the uprights can slide together or come off entirely for full bed access. The 69-1/2" elliptical crossbars cut down on wind noise, so you can drive without the constant whistle that’s common with square bars.
Strong and Rustproof: 6000-Series Aluminum with Dual Powder Coat
The entire rack system is built from lightweight 6000-series aluminum that’s strong, corrosion resistant, and won’t weigh down your truck. A dual-stage powder coat adds even more durability—an electrostatic e-coat that clings tightly to the surface, followed by a clear coat that protects against scratches and keeps the rack looking clean. The combination of aluminum and powder coating means it stays sturdy and rust-free even after years of use.
Quick, No-Drill Install: Mounts in Stake Pockets for a Solid Fit
The base rails mount directly into the stake pockets with no drilling required. Each side uses a wide base for extra stability, so there’s no need for additional bracing. The two T-tracks built into the rails let the uprights slide smoothly and lock into place wherever they’re needed. That means you can load long materials one day and move the racks out of the way for larger cargo the next.
Tie-Down Flexibility: Built-In Stops and Cleats for Easy Securing
Eight tie-down accessories come standard—four adjustable load stops that slide along the crossbar channels and four side cleats that bolt onto the uprights. The load stops keep ladders, lumber, or pipe in place, and the integrated loops give you secure points for straps. With multiple mounting slots on both the top and bottom of each bar, you can position tie-downs exactly where they’re needed to keep your cargo from shifting.
Smooth Ride and Clean Look: Aerodynamic Design Reduces Drag
The elliptical crossbars and built-in airfoil strips at the front help manage airflow, reducing drag and cutting wind noise. The streamlined shape not only improves efficiency but also gives the rack a clean, finished look that blends in with the truck’s profile. At 27-5/16" tall (including the base rails), the TracRac SR keeps gear high enough for clearance but low enough for easy loading.
Specs
Weight and Capacity
- Carrying capacity: 1,250 lbs
Dimensions
- Crossbar length: 69-1/2"
- Rack height (with base rails): 27-5/16"
Warranty
- Limited lifetime warranty
43002 Thule Track Rack SR Sliding, Truck Bed Rack
21782 Thule Track Rack Base Rails for Short Bed Crew Cab Chevy and GMC Full-Size Trucks
Replaces TracRac TA21782-02
Alternate Instructions
This Product Fits The Following Vehicles
- 2014 - 2018 GMC Sierra 1500 5-1/2 Foot Bed
- 2019 - 2026 GMC Sierra 1500 5-3/4 Foot Bed
- 2022 - 2022 GMC Sierra 1500 Limited 5-3/4 Foot Bed
- 2024 - 2027 GMC Sierra EV
- 2014 - 2018 Chevrolet Silverado 1500 5-1/2 Foot Bed
- 2019 - 2026 Chevrolet Silverado 1500 5-3/4 Foot Bed
- 2022 - 2022 Chevrolet Silverado 1500 LTD 5-3/4 Foot Bed
- 2024 - 2027 Chevrolet Silverado EV
Ratings & Reviews
4.6
174 reviews
by:
Juan Pablo
10/13/2025
2026
GMC
Sierra 1500
Great product as it was promoted. Also good quality and strong. I’m using it to add to my rack.
by:
Jeff
10/04/2023
GMC
Sierra
DO NOT TRUST THE ADVICE GIVEN BY THE SO-CALLED EXPERTS AT ETRAILER. This rack WILL NOT fit the Carbon Pro Bed...I was told by 2 different "experts" that this rack would fit my 2023 Sierra w/the Carbon Pro Bed, since this rack mounted to the stakebed pockets and not to the underside of the bedrail. After receiving my order, I prepared to install the rails and cutout the front stakebed pocket covers which is required to do the install (also indicated by Kevin C. from ETrailer). As soon as I got to step 3 of the rail install instructions, I knew there was a problem. The instructions indicated there was a hole on the inside of the bed to secure the rear stakebed pocket adapter to. There is no hole or any other type of access to any of the stakebed pockets on the Carbon Pro Bed. So, now I have altered bedrails and have a rack that does not fit. It is completely irresponsible of the "experts" at Etrailer to provide information or direction that is not true or hasn't been confirmed.
by:
Mark
02/09/2020
2019
GMC
Sierra 1500
I bought this TracRac SR for a 2019 new gen GMC 1500 AT4 with a Lomax/WeatherTech tri-fold hard bed cover thinking I would still be able to open and close cover. I could not. The base rails overlapped the inside bed rail just enough to prevent opening the cover. The base rail itself measure 4" wide. When trying to size it up on truck I did notice that when mounted it looks like the rear base rail is larger than the truck bed rails and hangover the outside of the rails. Some people may or may not liked the fact that it does not follow the contour of the truck bed. I only opened the base rail box so can not comment on cross bars. The base rails were well made and very heavy duty. etrailor customer service is one of the best I have ever dealt with! They do a amazing job, the entire process of ordering to return was incredibly easy and they have a great knowledge of the products they sell.
by:
Noah
07/30/2022
Great rack. Easy to remove if necessary. Good for sandwiching tall stuff occasionally like a fridge or water heater. I recommend using a long 2x4 to evenly push and pull along the track if you don't have super long arms.
by:
Karen
05/28/2025
2021
Chevrolet
Silverado 1500
Great product. This is my 3rd and will buy a 4th for the next truck
by:
Jason
01/28/2022
This rack system has been excellent. Easy to install, convenient and easy to slide racks on and off, and built solid.
by:
Kevin
06/15/2022
by:
Boris
08/19/2022
by:
Michael
09/21/2022
by:
Jorge
04/01/2025
2020
Chevrolet
Silverado 1500
by:
Daniel
03/09/2021
2021
GMC
Sierra 1500
by:
Matthias
09/07/2024
2023
GMC
Sierra 1500
by:
Jeremiah
08/26/2023
2023
Chevrolet
Silverado 1500
by:
Louis
11/04/2025
2018
Ford
F-150
I bought my first Thule TracRac in 2018 and loved it for its crisp style, robust integrity and ease of removal so in 2025 when I bought my next F-150 Lariat I bought the same Trac Rac again. It's a wonderful design. Pro-tip, get the BAK industries tonneau cover too, they fit together perfectly. Amazing!
Mike L.
11/4/2025
That's awesome, Louis! Great advice on the BAK cover....
by:
Jake
11/21/2025
2018
Mercedes-Benz
Sprinter 2500
I move a lot of material for work. This rack seems very well constructed, very easy to put together and install. Being able to adjust the racks and slide them completely out of the way was reasoning to purchase this exact unit. I also tow a gooseneck trailer and need full access to the bed of my truck. Great product that functions and looks nice on a black truck with chrome trim package.
Nick S.
11/24/2025
That is great to hear! I am glad the installation was a breeze and it works well for your application. What do you do for work hauling that material around?
by:
Chris
02/18/2025
2023
Ford
F-350 Cab and Chassis
Ordered this rack for my 2023 Ford F350 super duty long bed, even when being told it was on a 2-3 month backorder the sales team kept me updated throughout the whole process. I actually received this order 1 month ahead of original schedule and it fit perfectly on my truck. Everything lines up perfectly fine minimum tools where required and looks great.
Brooke M.
2/20/2025
Thanks for sending in the photo, it looks great! Is this a work truck? Its a really cool feature how youre able to slide the bars up like that.
Brooke M.
2/20/2025
@Chris Thats awesome! Ill have to double check the fitment on this and possibly make an update to what should be listed! What do you do for work? I used to work for a very tall house painter who probably would have loved to be able to scoot the bars up when they werent being used. Im only about 5 ft 6 and still would hit my head from time to time, haha
by:
Chris
07/20/2015
2010
Dodge
Ram Pickup
Couldn't be happier with the Rack, it went together and operates flawlessly. Dealing with e trailer was a snap, I was informed all the way through the buying process of shipping and arrival dates. Will absolutely buy shop again with e trailer.
Chris
8/5/2016
Im as happy today as I was the first day that I had the Rack. Its agreat product!!
by:
Jim
04/18/2024
We've been really happy with the Thule Sliding TracRac, and have made some unusual modifications. We wanted to mount it outside/around a camper shell, so we needed to mount the rails outboard of the truck bed (aluminum "shelves") and figure out how to make the crossbars longer (bought a third crossbar and connected extension sections by making three-holed t-slots nuts and using round aluminum tubes). None of this sanctioned by etrailer or Thule, of course. See photos, which also show an adaptor I made to mount a Thule square bar above the TracRac crossbar to use existing Thule accessories.
by:
Tim
12/15/2023
Pontiac
Trans Sport Van
Past 20 years I've used Rack-It truck racks. They're solid steel, eventually rust and took two grown men (and an extra set of nuts) to remove them from the truck. Great racks. Just way more than what I need the older I get.
However I wanted something that could easily be removed (by myself), if needed, and was aluminum. I bought these, as well as the extension cantilever, and it serves my needs as a general contractor. It supports my 24' walk plank just fine. The only thing I have to be creative to transport is full length rebar. If I transported rebar all the time, this rack would not be my first choice.
At the time of my purchase, there was not a specific rack for my GMC AT4. So I simply measured the bed of the truck, bought one with a similar measurement, and modified the drilling holes to work.
Lastly, I didn't want a silver color rack on my black truck. While you could get the racks in black. You could not purchase a black cantilever. So I simply had all the pieces powder coated black.
Honestly, I get a lot of compliments on it. Because no one else has one like it.
I'm very happy with it. It's perfect for the occasional ladder, walk plank, or 16' piece of lumber. I've had it mounted for over a year now, with zero problems! I remove it weekly to go through the car wash, and throw it back on in 5 min or less when i get home.
However I wanted something that could easily be removed (by myself), if needed, and was aluminum. I bought these, as well as the extension cantilever, and it serves my needs as a general contractor. It supports my 24' walk plank just fine. The only thing I have to be creative to transport is full length rebar. If I transported rebar all the time, this rack would not be my first choice.
At the time of my purchase, there was not a specific rack for my GMC AT4. So I simply measured the bed of the truck, bought one with a similar measurement, and modified the drilling holes to work.
Lastly, I didn't want a silver color rack on my black truck. While you could get the racks in black. You could not purchase a black cantilever. So I simply had all the pieces powder coated black.
Honestly, I get a lot of compliments on it. Because no one else has one like it.
I'm very happy with it. It's perfect for the occasional ladder, walk plank, or 16' piece of lumber. I've had it mounted for over a year now, with zero problems! I remove it weekly to go through the car wash, and throw it back on in 5 min or less when i get home.
by:
Robert B.
09/20/2019
Very happy with the rack on my 2018 Silverado. I also have the Back flip hard top bed cover. I am able to open all but the very last position. I might still be able to adjust the rails and to get there but it hasn't been an issue. Used it to haul lumber and I made a bicycle rack that works with the racks and the bed cover down. Works great. Was not hard to install.
by:
Don A
09/24/2017
2018
Dodge
Ram Pickup
Well made product and pretty clear and straight forward install. This was installed on top of a Retrax Pro Bed Cover with stake bed cutouts and no Ram box for a 2018 Dodge Ram 2500.
Only negative comment was the kit was short 2 end bed rail caps.
Just to be clear, this is somewhat uncharted territory as there isn't any info I could find on the compatibility of the Trac Rac with the Retrax Pro bed cover. Worked out very well and no modifications were necessary otjer than cutting out the factory bed pocket cutouts in the RAM truck itself.
Highly recommend the combo!
Only negative comment was the kit was short 2 end bed rail caps.
Just to be clear, this is somewhat uncharted territory as there isn't any info I could find on the compatibility of the Trac Rac with the Retrax Pro bed cover. Worked out very well and no modifications were necessary otjer than cutting out the factory bed pocket cutouts in the RAM truck itself.
Highly recommend the combo!
by:
Harry W
04/13/2022
etrailer.com is an outstanding company. I purchased a Thule system in January. Due to logistics (my fault) I tried to install the system in April. Three of the attachment arms were incorrect. I contacted Ashley of etrailer, the sales representative who sold me the system, who patiently listened and after receiving the needed photos and explanation, etrailer sent me a replacement system. The new system was installed and the truck is ready to go. Ashley's professionalism, communication skills, product knowledge were excellent. Ashley and etrailers' commitment to solving my issue expeditiously puts etrailer in a class by itself.
by:
Michael R.
10/01/2017
2016
Nissan
Titan
In short: the sliding ladder rack is excellent.
Assembly: Plan on spending a good while assembling it, and make sure you have a decent torque wrench and ALSO a strong set of allen head sockets, so you don't round out cap screws. Be triple sure you have the top and bottom of the crossbars correct before attempting assembly.
Usability: other reviews have spoken to all of this, but for me: the carrying capacity mixed with ease of adjustment and removal. It also happens to look incredibly sexy, when installed on my 2016 Nissan Titan XD (and with the TracRac cantilever extension installed).
Assembly: Plan on spending a good while assembling it, and make sure you have a decent torque wrench and ALSO a strong set of allen head sockets, so you don't round out cap screws. Be triple sure you have the top and bottom of the crossbars correct before attempting assembly.
Usability: other reviews have spoken to all of this, but for me: the carrying capacity mixed with ease of adjustment and removal. It also happens to look incredibly sexy, when installed on my 2016 Nissan Titan XD (and with the TracRac cantilever extension installed).
by:
Eric K
09/30/2020
Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.
by:
Jim H.
05/06/2017
2015
Chevrolet
Silverado
I am very happy with the quick processing and shipping of my TracRac from etrailer. The TracRac is well made and the instructions were good. It fit my 2015 Chevy Silverado 2500HD well. I was able to use it with my bakflip F1 tonneau cover but the seals rub against the rack rails. The only reason I did not rate it at 5 stars was that one of the rack arms had the center pipe in backwards. I had to spend 20 minutes removing it and turning it around to install correctly. It looks great on the truck and is very sturdy. The racks slide easily on the rails so I can adjust them to fit whatever I am carrying. It also allows me to slide the rear rack all the way back so I can open the bacflip tonneau cover without it hitting the rack arms.
25
174
true
Show More Reviews
See what our Experts say about this Thule Ladder Racks
- Is There a Ladder Rack that Fits with Access Tonneau Cover for 2025 GMC Sierra EVHey Robert, the Access tonneau cover part # A24AU can work with a ladder rack but it has to be one that attaches to the top of the bed rails and not one that wraps around them like the Yakima Overhaul. For a ladder rack that installs like that the Thule TracRac SR part # TH43002XT-782 is a fit for your 2025 GMC Sierra EV and would work great.
view full answer... - Ladder Rack Compatibility with Extang EnCore Tonneau Cover on 2020 Chevy 1500 5-3/4 Foot BedFor your 2020 Chevy 1500 5-3/4 bed, the Access Lorado Soft, Roll-Up Tonneau Cover # A93FR is compatible with the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4002965. The Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-782 can also work, but you will need to slide the rack to fold the tonneau as the rack supports are angled in.
view full answer... - Does The Thule TracRac SR Work On A 2022 Chevy Silverado 1500 5-3/4 Foot Bed Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-782 is confirmed to fit your 2022 Chevrolet Silverado 1500 with a 5-3/4 foot bed. I like the TracRac over the other ladder racks that we offer because it doesn't require any drilling to install it. The tracks mount directly into the stake pockets on your truck bed rails, which makes the installation quite easy. Make sure you use the included adapter for the rear stake pockets as shown in the attached instructions. The ladder...
view full answer... - Can I Use a Tonneau Cover with a Thule Xsporter Pro on a 2021 GMC Sierra 1500 AT4 Short BedI may have a solution for you but there is not a tonneau cover that is compatible with a Thule Xsporter Pro # TH500XTB since it uses the insides of the bed rails to mount instead of the tops of the rails. For a tonneau cover you might be able to use something like the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black # BAK62VR, which is designed to fit on a 5-3/4 foot long bed of a 2021 GMC Sierra 1500, since it mounts inside the rails and has a flush profile....
view full answer... - Compatability of BAK Revolver Tonneau Cover With Yakima Overhaul Rack on 2020 Silverado 1500The Yakima OverHaul HD Ladder Rack # Y01151-5955 is compatible with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers. If you're set on using this ladder rack, or already have it, I recommend the RetraxONE XR Hard Tonneau Cover # RTX24YR. This is a retractable cover so you will have full bed access. It also features a locking handle so you can keep cargo secure. If you really want to use the BAK Revolver # BAK62VR then I recommend checking out the Thule TracRac SR...
view full answer... - 2021 GMC Sierra CarbonPro Bed Ladder Rack CompatiblityI have listed three racks that will all work with your 2021 Sierra Short Box Crew with the CarbonPro Bed. They will also offer drill free installation. My recommendation is Thule TracRac SR Sliding Truck Bed Ladder Rack, part # TH43002XT-782, is a great option. It has a weight limit of 1250lbs. The tracks for this rack attach in your bed's stake pockets. But my favorite feature of this rack is that rack slides. So if you need to use the bed of your truck you can slide the rack all the...
view full answer... - Recommend Hard Tonneau Cover and Ladder Rack for a 2022 Silverado 1500 Trail Boss w/ 5 3/4 BedCongrats on the new truck and thanks for the picture! I will be happy to answer all of your questions. The Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43002XT-782 is only available with the silver uprights and crossbars. The Truxedo Elevate Item # TX96NV mount in T slots, is confirmed to fit your truck, and they only other sliding ladder rack we have for your 2022 Silverado. It is compatible with BAK, Extang, Retrax, and Truxedo tonneau covers with T slots not Thule. This...
view full answer...
- Thule TracRac SR Rail DimensionsThe rails on the Thule TracRac SR # TH43002XT-782 will be as long as your truck bed rails. They are about 4 inches wide, from the bottom to the top of the inner channel they are about 1-1/4 inches and from the bottom to the top it's about 1-7/8 inches.
view full answer... - Installation of Base Rails for TracRac SR Sliding Ladder Rack on 2018 Chevy Silverado 1500The Thule TracRac SR Sliding Ladder Racks that fit your 2018 Chevy Silverado 1500 will install directly in the stake pockets of your truck. All you need to do is appropriately line up the base rails with the stake pockets. Your 2018 Silverado does have to use the included adapter for the rear stake pocket, as you can see by the accompanying cut out of the instructions. You will need to use that adapter and the existing hole at the rear of your truck bed to tighten the bolt. The front...
view full answer...
- Is Thule TracRac SR Ladder Rack Compatible w/ Tonneau Cover on 2017 GMC Sierra w/ 5-1/2 Foot BedWhile the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-782 will technically fit your 2017 GMC Sierra 1500 with a 5-1/2 foot bed and the BAKFlip MX4 # BAK48120, the issue is functionality. If you take a look at the accompanying photo, the arrow I added shows the flap of the BAKFlip MX4 and how it extends onto the bed rails. What this means is that you may have difficulty when trying to fold the MX4 up or back down and it may rub against the rails of the ladder rack. What...
view full answer...
- Instructions for Base Rails of TracRac Ladder Rack to Side Rails on 2014 Chevy Silverado 1500 5.5ftGood news! I was able to go out to our warehouse and find the instructions for the # TH21501 base rails which are included in the Trac Rac Kit # TH43002XT-782 that is a confirmed fit for your 2014 Chevy Silverado 1500 5.5 foot bed. I will be sending them to you in a separate email. Basically the rails will install as a drill through assembly, as seen in the attached image. I have also linked the location of the installation hole for the base rail that you will use for your Silverado...
view full answer...
- Ladder Rack for my 2020 GMC Sierra with the Carbon Pro Bed.I have checked around and there does not seem to be any information out there in regards to any special treatment of the Carbon Pro beds. Confirm this in your owners manual to make sure there are no special notes about the Carbon Pro bed. With that said the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack part # Y01151-58 is a really nice looking and solid rack. Check out the video on it I have linked to see some additional details on it. I notice that you had also looked at the Thule...
view full answer... - Will TracRac Ladder Rack Fit with Paragon Tonneau CoverYes, I checked out the Paragon truck tonneau cover and the TrackRac Ladder Rack part # TH43002XT-782 that you referenced would fit and work well.
view full answer... - Will Thule TracRac SR Sliding Ladder Rack Fit with Tonneau Cover on a 2014 GMC Sierra 1500 Yes you can! The Thule TracRac SR Sliding ladder rack is one of the few ladder racks we carry that will allow you to install certain tonneau covers on your truck as well. If your pickup is the 2014 GMC Sierra 1500 that you put into the vehicle selection then the correct TracRac SR for you would be part # TH43002XT-782 for a 5-1/2' bed, part # TH43002XT-781 for a 6-1/2' bed, or part # TH43002XT-780 for an 8' bed. My favorite tonneau cover to recommend is the BAK Revolver X2. This is confirmed...
view full answer... - Is The Thule TracRac SR Sliding Ladder Rack Compatible With A 2021 GMC Sierra 1500 Carbon Pro bed The Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250lbs # TH43002XT-782 mounts to the stake pockets of your 2021 GMC Sierra 1500 so it will not affect your CarbonPro bed at all. Most likely your stake pockets closest to the cab are still covered by the rail cap so you will need to cut out the hole to gain access to the stake pocket. The Thule TracRac SR is an awesome option with the most versatility to meet your needs. The T-track base rails run along the full length of your Sierra's...
view full answer... - BAK Revolver Hard Roll-Up Tonneau Covers and Compatible Ladder Racks for 2016 GMC Sierra 1500The BAK Revolver X4 and X2 Hard Roll Up Tonneau Covers, when they are rolled up to the back of the cab window, will be approximately 9-inches in diameter for the 5-1/2-foot bed version, about 10-inches for the 6-1/2-foot bed version and about 12-inches for the 8-foot bed version. My contact at BAK who provided these figures said these are approximate dimensions only. The Revolver covers for the 2016 GMC Sierra 1500 are as follows: 5-1/2-foot bed models can use X2 # BAK39120 6-1/2-foot...
view full answer... - Ladder Rack Compatible Tool Box Recommendation for 2021 Chevy Silverado 1500Thule offers a mount for crossover style tool boxes as part # TH25200 which will allow you to mount a toolbox to the top of the SR sliding rails. For a short bed 2021 Chevy Silverado 1500, I'd recommend the 12 cubic foot capacity # DZ8170DB from DeeZee in black or # DZ8170D in silver. Along with the mount kit, the large DeeZee Red Label truck toolbox would work great for you.
view full answer...
- Can The Leer Soft Tonneau Cover And Thule TracRac SR Be Used Together On A 2019 Chevy Silverado 1500The Leer Soft Tonneau Cover # LE76VR leaves room on the bedrails for stake pocket access so that the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-782 can fit, but we find that combinations like this tend to wear on the edge of the soft cover as you open and close it. This can prematurely wear the cover out and make it harder to seal the edges. The BAK Revolver X4s Hard Tonneau Cover # BAK62VR has a bit more of a lip on the inside of the bedrails and has been shown to be...
view full answer... - 2017 GMC Sierra 1500 CrewCab TracRac SR Base Rails InstallationThe TracRac SR is bed size specific not cab style specific but for your 5-1/2 foot bed, you should have the TracRac SR Sliding Truck Bed Ladder Rack - Full Size Pickup Trucks - 1,250 lbs # TH43002XT-782. I reached out to the manufacturer and they said you will use the T900 holes. If you need further help, please let me know.
view full answer... - Ladder Rack Compatible With BAKFlip G2 on 2020 Chevrolet Silverado 1500 With 5-3/4 BedSince you're looking at the # TX96NV I'm assuming you have a 5-3/4' bed with the # BAK226130 installed on your 2020 Silverado 1500. We have quite a few different options that will work with your BAKFlip G2 in addition to the TruXedo rack. For an all in one we have the following: -Pace Edwards UltraGroove Retractable Tonneau Cover w Ladder Rack # KRCA27A58-ELC0101 -Pace Edwards UltraGroove Retractable Tonneau Cover w Ladder Rack - Electric # KECA27A58-ELC0101 -Pace Edwards UltraGroove...
view full answer... - Does the Thule TracRac SR Work on a 2020 Chevy Silverado 1500?Yes. The Thule TracRac SR Sliding Ladder Rack is a confirmed fit on all bed lengths of the 2020 Chevy Silverado 1500. The beauty of the TracRac is that it doesn't require any drilling to install it; the tracks mount directly into the stake pockets on your truck bed rails- so the installation is really quite easy. The one thing to note during installation for the 2020 Chevy Silverado is that you'll need to use the included adapter for the rear stake pocket as shown in the attached instructions-...
view full answer... - Which Tonneau Cover Is Recommended to Fit with TracRac Sliding Ladder Rack on 2016 Chevy SilveradoSome people have had luck installing a sliding Thule TracRac like the part # TH43002XT-782 with the BackFlip MX4 like the part # BAK48120 that you have installed on your 2016 Chevy Silverardo 1500 5-1/2 foot bed. That said the issue isn't so much the folds interfering with the uprights as much as it is the base rails of the rack not allowing the cover to fold. This is due to the tonneau covering a small part of the bed rail cover like what you have in your picture. The only tonneau we...
view full answer...
- Will Thule SR Ladder Rack Work with BakFlip Tonneau Cover on 2022 GMC Sierra 1500 5-3/4' BedThe correct Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2022 GMC Sierra 1500 with 5-3/4' Bed is the part # TH43002XT-782. In regards to compatibility with a BakFlip Tonneau Cover, they will both mount up no problem but if it's a hard folding cover you'll have to slide the ladder rack uprights towards the cab to fold the cover back and you won't be able to do so all the way as the uprights are angled and the panels hit them when folded back. If you need to be able to open the cover...
view full answer... - Best Ladder Rack and Tonneau Cover Combination for 2018 Chevy Silverado 1500 Crew CabI recommend going with the BAK Revolver X4s tonneau cover combined with the Thule TracRac SR Ladder Rack for your 2018 Chevy Silverado 1500 Crew Cab. The Revolver X4s gives you the durability and security of a hard tonneau cover but also the sleek look of a soft cover. The TracRac SR installs on top of your bed sides and won't impede on the operation of the X4s. The correct parts for your truck depend on your bed size: 5-1/2' Bed Revolver X4s - # BAK25VR TracRac SR - # TH43002XT-782 6-1/2'...
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Tyler C
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Michael B
Written by:
Matthew S
Video by:
Ryan G
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
10/20/2025
That looks great on your truck! I am glad it has been working well for you. Where are you mainly taking that canoe out to?