To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Thule TracRac SR Sliding Truck Bed Ladder Rack moves along the full length of the bed on its T-track base rails, so you can position the uprights wherever you need them. Slide both sections together for unobstructed bed access, or separate them to carry long loads like ladders or lumber. Integrated quick-release knobs let you loosen, move, and lock the rack in place without tools, and it removes completely from the tracks when you’re not hauling gear.
Built to handle serious work or play, this rack supports up to 1,250 lbs and stands 27-5/16" tall with the base rails installed. The wide upright bases keep everything stable without the need for extra bracing. Whether you’re loading pipe, planks, or kayaks, the included load stops and side cleats make it easy to secure your cargo so it stays put mile after mile.
The 6000-series aluminum construction is strong yet lightweight, so it won’t cut into your truck’s payload capacity. Aluminum is naturally rustproof, and Thule adds both an e-coat and a clear powder coat for extra protection from scratches and corrosion. The result is a rack that holds up to years of tough use without weighing your truck down.
Each 69-1/2" elliptical crossbar is shaped to reduce wind drag and noise. Built-in airfoil trip strips stop whistling through the accessory slots, keeping your drive quieter no matter how fast you’re moving. The internal web structure inside the bars adds strength and rigidity while keeping weight low.
The TracRac SR mounts directly into the truck’s stake pockets, so there’s no drilling required. The base rails sit on top of the bed rails for a clean, factory-style fit and solid foundation. Once in place, the rails provide two integrated tracks for the uprights and accessories, giving you a fully adjustable system that’s just as easy to remove as it is to install.
Alternate Instructions
Ratings & Reviews
DO NOT TRUST THE ADVICE GIVEN BY THE SO-CALLED EXPERTS AT ETRAILER. This rack WILL NOT fit the Carbon Pro Bed...I was told by 2 different "experts" that this rack would fit my 2023 Sierra w/the Carbon Pro Bed, since this rack mounted to the stakebed pockets and not to the underside of the bedrail. After receiving my order, I prepared to install the rails and cutout the front stakebed pocket covers which is required to do the install (also indicated by Kevin C. from ETrailer). As soon as I got to step 3 of the rail install instructions, I knew there was a problem. The instructions indicated there was a hole on the inside of the bed to secure the rear stakebed pocket adapter to. There is no hole or any other type of access to any of the stakebed pockets on the Carbon Pro Bed. So, now I have altered bedrails and have a rack that does not fit. It is completely irresponsible of the "experts" at Etrailer to provide information or direction that is not true or hasn't been confirmed.
Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.
This is a great product and works really well with the Bak RevolverX2 Tonneau cover.
The only reason I didn't give it a 5 was because the base track has about a 3/4" overhang at the rear of the bed rails. Unfortunately the bed rails of the 2016 Tundra Double Cab are not square. As you can see from my photos, the front fits flush while the rear hangs over. Besides that, they are very sturdy and installation was simple.
Knowing what I know now, I would still buy this product again.
I am very happy with the quick processing and shipping of my TracRac from etrailer. The TracRac is well made and the instructions were good. It fit my 2015 Chevy Silverado 2500HD well. I was able to use it with my bakflip F1 tonneau cover but the seals rub against the rack rails. The only reason I did not rate it at 5 stars was that one of the rack arms had the center pipe in backwards. I had to spend 20 minutes removing it and turning it around to install correctly. It looks great on the truck and is very sturdy. The racks slide easily on the rails so I can adjust them to fit whatever I am carrying. It also allows me to slide the rear rack all the way back so I can open the bacflip tonneau cover without it hitting the rack arms.
Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.
In short: the sliding ladder rack is excellent.
Assembly: Plan on spending a good while assembling it, and make sure you have a decent torque wrench and ALSO a strong set of allen head sockets, so you don't round out cap screws. Be triple sure you have the top and bottom of the crossbars correct before attempting assembly.
Usability: other reviews have spoken to all of this, but for me: the carrying capacity mixed with ease of adjustment and removal. It also happens to look incredibly sexy, when installed on my 2016 Nissan Titan XD (and with the TracRac cantilever extension installed).
Well made product and pretty clear and straight forward install. This was installed on top of a Retrax Pro Bed Cover with stake bed cutouts and no Ram box for a 2018 Dodge Ram 2500.
Only negative comment was the kit was short 2 end bed rail caps.
Just to be clear, this is somewhat uncharted territory as there isn't any info I could find on the compatibility of the Trac Rac with the Retrax Pro bed cover. Worked out very well and no modifications were necessary otjer than cutting out the factory bed pocket cutouts in the RAM truck itself.
Highly recommend the combo!
etrailer.com is an outstanding company. I purchased a Thule system in January. Due to logistics (my fault) I tried to install the system in April. Three of the attachment arms were incorrect. I contacted Ashley of etrailer, the sales representative who sold me the system, who patiently listened and after receiving the needed photos and explanation, etrailer sent me a replacement system. The new system was installed and the truck is ready to go. Ashley's professionalism, communication skills, product knowledge were excellent. Ashley and etrailers' commitment to solving my issue expeditiously puts etrailer in a class by itself.
Very happy with the rack on my 2018 Silverado. I also have the Back flip hard top bed cover. I am able to open all but the very last position. I might still be able to adjust the rails and to get there but it hasn't been an issue. Used it to haul lumber and I made a bicycle rack that works with the racks and the bed cover down. Works great. Was not hard to install.
Past 20 years I've used Rack-It truck racks. They're solid steel, eventually rust and took two grown men (and an extra set of nuts) to remove them from the truck. Great racks. Just way more than what I need the older I get.
However I wanted something that could easily be removed (by myself), if needed, and was aluminum. I bought these, as well as the extension cantilever, and it serves my needs as a general contractor. It supports my 24' walk plank just fine. The only thing I have to be creative to transport is full length rebar. If I transported rebar all the time, this rack would not be my first choice.
At the time of my purchase, there was not a specific rack for my GMC AT4. So I simply measured the bed of the truck, bought one with a similar measurement, and modified the drilling holes to work.
Lastly, I didn't want a silver color rack on my black truck. While you could get the racks in black. You could not purchase a black cantilever. So I simply had all the pieces powder coated black.
Honestly, I get a lot of compliments on it. Because no one else has one like it.
I'm very happy with it. It's perfect for the occasional ladder, walk plank, or 16' piece of lumber. I've had it mounted for over a year now, with zero problems! I remove it weekly to go through the car wash, and throw it back on in 5 min or less when i get home.
We've been really happy with the Thule Sliding TracRac, and have made some unusual modifications. We wanted to mount it outside/around a camper shell, so we needed to mount the rails outboard of the truck bed (aluminum "shelves") and figure out how to make the crossbars longer (bought a third crossbar and connected extension sections by making three-holed t-slots nuts and using round aluminum tubes). None of this sanctioned by etrailer or Thule, of course. See photos, which also show an adaptor I made to mount a Thule square bar above the TracRac crossbar to use existing Thule accessories.
Couldn't be happier with the Rack, it went together and operates flawlessly. Dealing with e trailer was a snap, I was informed all the way through the buying process of shipping and arrival dates. Will absolutely buy shop again with e trailer.
I move a lot of material for work. This rack seems very well constructed, very easy to put together and install. Being able to adjust the racks and slide them completely out of the way was reasoning to purchase this exact unit. I also tow a gooseneck trailer and need full access to the bed of my truck. Great product that functions and looks nice on a black truck with chrome trim package.
Ordered this rack for my 2023 Ford F350 super duty long bed, even when being told it was on a 2-3 month backorder the sales team kept me updated throughout the whole process. I actually received this order 1 month ahead of original schedule and it fit perfectly on my truck. Everything lines up perfectly fine minimum tools where required and looks great.
Great product as it was promoted. Also good quality and strong. I’m using it to add to my rack.
I bought my first Thule TracRac in 2018 and loved it for its crisp style, robust integrity and ease of removal so in 2025 when I bought my next F-150 Lariat I bought the same Trac Rac again. It's a wonderful design. Pro-tip, get the BAK industries tonneau cover too, they fit together perfectly. Amazing!
Works well
I received packages with Thule trac rac SR sliding truck bed ladder rack,Iam totally disappointed, parts arrived incomplete,mising:
04 rubber shim
04 rubber block for base rail
04 metal pocket nut
also
04 crossbar tie down
I really want you fix this problem by replacing the missing parts or else I will return everything
Rack is decent as expected from Thule, but the service from etrailer was subpar. I had some questions about installation and included parts that could not be answered by the customer service rep I spoke with, all she could do was speak from her script and eventually referred me to Thule about the missing parts. I kinda thought that would be her job, but I ended up calling Thule and they were helpful as usual. I have alway had good service from etrailer, so hopefully this was just an isolated incident.
Shipping was a disaster, one box came right away white the second box went all over the us before showing up. But once it did the ladder rack was built incorrectly at the manufacturer and can’t be put together
Its been great. Done everything Ive asked of it. I would buy it again
David
12/4/2025
This rack is very solid and has taken every thing Ive dished out. I wouldnt hesitate to get another when I get a new truck. The only issue is the finish has completely came off 2 of the bottom sliding brackets, very strange that its the front right and back left which are the same style or hand
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Katrina D.
9/22/2023
I see our customer service has sent you the replacement parts. Once you receive them, I would love to hear your updated feedback.