Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs
(611 reviews)
Price: $193.05
Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs
Item # JET-2500
Retail:$218.27
Our Price: $193.05
You Save: $25.22
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (611)
- Q & A (0)
- Photos
Stromberg Carlson Camper Jacks - JET-2500
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 18 Inch Lift
- Stromberg Carlson
- Bolt-On
Take the effort out of lifting your trailer with this electric jack from Stromberg Carlson. The sleek black jack features an LED light for nighttime use, as well as water-resistant switches and a vacuum-formed cover for protection from the elements.
Features:
- Powered jack eliminates the need for hand cranking, making jacking up your trailer a sweat-free job
- Water-resistant switches provide easy operation
- LED illuminates the area for simple nighttime setup
- Built-in device lets you easily see if your trailer is level
- Break-through handle allows you to manually operate jack if needed
- Easily bolts onto your trailer's A-frame - hardware included
- Rust-resistant, powder coated steel parts are strong and durable
- Jack cover is made of vacuum-formed plastic for extra protection from severe weather
- Zinc-plated steel footplate included
Specs:
- Bracket height:
- 9" Retracted
- 27" Extended
- Lift: 18"
- Lift capacity: 2,500 lbs
- Outer tube diameter: 2"
- Inner tube diameter: 1-3/4"
- Footplate diameter: 4-1/2"
- Motor draws 24-25 amps under load
- Power wire: 10 gauge
- 2-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
JET-2500 Stromberg Carlson Electric Trailer Jack - 18" Lift - 2,500 lbs
California residents: click here
Customer Reviews
Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs - JET-2500
Average Customer Rating: 4.8 out of 5 stars (611 Customer Reviews)
Take the effort out of lifting your trailer with this electric jack from Stromberg Carlson. The sleek black jack features an LED light for nighttime use, as well as water-resistant switches and a vacuum-formed cover for protection from the elements.by: Kevin 04/25/2024
This is the second one of these we've owned. Works real good, a bit of over kill. The thing could probably lift the whole trailer.
by: Don 04/18/2024
It installed very easy. For a 2500lbs jack, it seems a little light weight. It does lift the trailer but seems kinda wobbly because the post size is so small. Other than that it works as advertised. Thank you for getting it to me so fast.
by: Ron Williams05/23/2017
I just installed my new JET-2500 trailer tongue jack in less than 15 minutes. The light and extend/retract work great. I was not sure if an adjustable drop foot is available for more length but do not think it is needed.
This is second purchase, first being Equalizer hitch system which is also even better with electric jack.
Etrailer exceeds customer expectations by follow up email and definite concern to keep their customers satisfied.
Great Company!
Thank-You
Ron Williams
by: Brett B.09/06/2013
Mounted on a 2012 Crossroads Z-1 251BH. Wokrs great!! No more hand cranking.
by: Patricia Cook06/16/2016
Took only about 5 mins to hook up, husband loves it. No more hand cranking when the old one went out. Great product!!! Camper goes up and down easily by pushing a button!! Priced just right...
by: Larry04/26/2016
Overall, it is a great product. I really like not having to crank the trailer tongue up and down by hand and it works very well.
One suggestion for Stromberg-Carlson: Turn the motor/gear assembly so it faces away from the front of the trailer, but leave the light to shine on the hitch assembly, etc. The tongue of my trailer is short enough that the hatch on my Traverse cannot be opened when the trailer is hitched. Might apply to a pick up tailgate, too.
Larry A.
4/26/2017
Same comments as I made a year ago. Overall, it is a good product.
by: stu08/01/2013
Installation of the the Jet-2500 trailer tongue jack went smoothly. Quality looks good and instructions very straightforward. I hooked up the trailer to my Ford F-150 to find out I can't open the tailgate while hooked up to the truck. I removed the three mounting bolts and tried to turn the jack 90 degrees but the bolt holes don't align now. So I put it back where it belongs and will just have to work around not being able to lower my tail gate while the trailer is hooked up.......
Dlh
8/8/2015
I have the same problem have you been able to resolve it? I cant believe they made a unit with such a large head and didnt make it so it could be rotated!
by: Rusty C07/29/2013
I have a buddy that recommended an electric jack for my new trailer
He was right, made the hookup so much easier. The price was half of the one from my dealer. And the response for my order was unbelievable, I ordered the jack on Wed evening about 6 o'clock and got it the next day before 4 PM.
Rusty C.
2/4/2015
Love the jack, hate to think what I would have to do without it. Im getting older and the thought of cranking the front of my trailer up or down makes me cringe. Thanks again Rusty
by: Rob T07/11/2015
I spent all of 7 minutes pulling off the old crank lift and bolting this baby onto our Jayco Heritage camping trailer . I already love pressing a button instead of my old beat-up crank. The LED throws off a lot of light - may come in real handy. Looking forward to using it in two weeks when we go camping.
Rob T.
7/29/2016
Thanks for the follow up, I love this product more every time I get to use it. Just went camping this weekend and it is really nice to be able to press the button to lift or lower.T hanks again, you guys rock.!!
by: Barry07/17/2019
This jack works fine with my Safari Condo Alto F1743 trailer, which only weighs 2,300 lbs loaded. An electric tongue jack is a wonderful convenience to have. And I really like the built-in bubble level, it’s very handy to have and is all I need to ensure that the trailer is level in both directions.
I have had no problems with it except one odd thing: a few months ago as I was about to prepare to level the trailer at my campsite, I looked at the bubble level and...there was no bubble. I called my spouse over and she couldn’t see it either. The trailer was already fairly level; the bubble should be visible. I jiggled the head of the jack, but could not make it appear.
I assumed that the fluid had leaked out of the level, so I went online and ordered a replacement level from e.trailer.com, $16, Item # 2500-3755E, “Replacement Manual Override Cover with Level ”. No big deal. I was back home in a day or two, parked my trailer in my driveway and forgot about it until the replacement part arrived several days later. I went out to the trailer and went to remove the “override cover” on my jack and...there was the bubble, plain as day. I called my spouse out to see it; we were both so surprised! There did not appear to be anything wrong with it. So I did not replace it.
We still can’t figure out how/why the bubble disappeared and then came back. My spouse noted that the day it disappeared it was a “super hot day” but we can’t recall what the air temp was, and I don’t remember it being particularly hot. The trailer was in full sun, which it normally is at our house, near San Francisco, but we don’t now recall where we were camping in California.
Regardless, I highly recommend this tongue jack if you have a small lightweight trailer. Of course Stromberg makes more powerful units for bigger trailers.
by: David Stevens07/28/2017
I can sum this Jack up in two words....
SWEAT FREE!!!!!!!
by: Jerry04/11/2019
Jack works really well doesn’t have a huge amp draw so the battery doesn’t take a big hit if you have to move it up-and-down installation was easy the light for the hitch is nice but it just doesn’t put out much light at all that could use a little boost from a really good LED bulb I would buy it again if I needed it. The jack works really well doesn’t have a huge amp draw so the battery doesn’t take a big hit if you have to move it up-and-down installation was easy the light for the hitch is nice but it just doesn’t put out much light at all that could use a little boost from a really good LED bulb I would buy it again if I needed it
by: Al S.09/02/2013
This has been an overall great experience dealing with etrailer.com. The quality of this jack seems to be very good. It took me all of 15 minutes to install.(I was replacing another power tongue jack, so that may have sped up the process a bit) Very easy install, the jack was ready to install right out of the box. I installed this on my 10' utility trailer which gets quite a lot of use so the power jack is a life saver. I had purchased another power jack from a local discount tool store(a move I sorely regret) and had I seen this jack on etrailer's site then, I wouldn't have gone there. The price here is a few dollars more, but the quality of this product is far better hands down. I know I'll be much happier with this product than I was with the "deal" I got from the other store. My old jack struggled to lift my trailer from day 1 but this one travels up and down with ease. So far I'm very pleased with this jack.
by: Mac05/12/2014
This product will spoil you--Great and worth the money--It took longer to open the box than it did to install it.
Mac
5/12/2015
Still working great! I love it. Makes life simple.
by: Ed G05/24/2019
This jack has worked perfectly for the past year. It raises and lowers my RPOD effortlessly, especially useful since I have a weight distribution hitch that requires two cycles to hook everything up. I and my back would recommend this without reservations.
by: Daryl Stanberry05/31/2013
I purchased this product for a completely off the wall reason, i try to make or modify differant things to fit the need at the time. this jack was used as a lifting device, for a power chair carrier. This use may be a little unusual but my grandfather was a blacksmith,and he taught me to build things to work as needed not to spend a lot of money to get what everyone else says is best. I shopped around for a power lift, and did not care fot the materials or the designs on most,and did not like the price of the really well built models. Your jack is rated heavy enough and is working fine for this purpose, with minor mounting modifacations, as of this time I am trying to redesign a manual cherry-picker and could possibly use another one of your products on that project. Your web site made it easy to find what I needed and the quality seems to be very good,also thank you for the quick delivery time.
by: Pete L12/08/2013
I have not as yet installed the jack.....however the customer service regarding the purchasing and delivery of the jack was outstanding. Communication with etrailer and servicing of the order was the best that I have ever experienced with an on-line company. Delivery was within a few days of my order on-line. I will definitely consider etrailer first when I shop for parts and accessories again.....Pete
by: Philip Hassrick11/30/2020
My Stromberg Carlson Tongue Jack was destroyed when the trailer became unhitched on the freeway. I contacted Etrailer who had it in stock and shipped the same day that I ordered. Throughout the shipping I was informed of it's progress and they delivered the day they said it would. Etrailer prices are excellent as is their handling.
by: Bella s Gelato Shoppe03/27/2014
The customer service from etrailer is amazing. Every order I place they are communicating with me all the way through until delivery. This time my sales rep was CarlaM. She took care of the all the way through with follow up emails to make sure everything went great. Haven't installed the jack yet, but will send a photo when installed.
Thanks etrailer and Carla.
Ken
by: RockinRobin12/30/2013
Great shipping & communication from etrailer. Removed manual jack and installed this one in less than 15 mins. without using any directions. Works great and what a difference it makes!
by: Gary 06/03/2021
The electric jack was easy to install, and works perfectly. I would
recommend this product to anyone wanting to replace their hand crank jack.
by: Mark G.03/31/2015
Now that it is installed and tested, I love this product. It was very easy to install and works as advertised.
The only reason I don't give it an excellent rating is because several screws on the case were obviously (visually) not tight when I opened the box. Not sure if this is an anomaly but their quality control definitely should have caught it.
by: Peter05/22/2019
Fitted to my camper without an problems, see picture.
Thie review also covers the two Jacks bought at the same time, also
shown fitted to the front of my camper.
Nice sturdy construction.
For reference I have a Gulfstream Ameri-Lite 14RBC.
by: John e05/30/2016
Shipping was fast. Great company to deal with. Thanx. Quality electric trailer jack. Recommend this product highly.
25
611
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Electric A-Frame Trailer Jack Recommendation for a 2014 Dutchmen 275BH Travel TrailerIn the literature for your new 2014 Dutchmen travel trailer there should be a tongue weight listed. This is the figure you will need to consider when choosing an electric tongue jack. It will increase though when the trailer is loaded so you will need to consider that as well. I looked up your trailer and it looks like the tongue weight is 280 pounds though it isn't clear if that is the dry or loaded tongue weight (likely dry). It also looks like there is limited space between the jack...
view full answer... - Is the Stromberg-Carlson 3500 Pound Electric Trailer Jack Water ProofThe Stromberg-Carlson trailer jack # JET-2500 can get wet as far as rain or maybe some splashing water. But it is not designed to be submerged. The switches are water resistant but not water proof. For something to be considered as water proof it has to be able to be submerged under water for a certain period of time and still operate like normal. None of the electric jacks we carry should be submerged under water. If your trailer jack would routinely get submerged under water then I...
view full answer... - Replacement 2 Inch Round Electric A-Frame Trailer JackWe do have a few electric A-frame jacks with a 2 inch diameter outer tube: Stromberg Carlson # JET-2500 rated for 2,500 pounds. Ultra-Fab # UF38-944017 rated for 3,500 pounds. Ultra-Fab # UF38-944037 rated for 3,500 pounds. This jack also includes a 7-way trailer connector Ultra-Fab # UF38-944016 rated for 4,000 pounds. Each jack offers 18 inches of lift. I've also attached videos of each one for you.
view full answer... - Electric A-Frame Trailer Jack to Replace a Manual Jack when Installing Weight DistributionThe electric A-Frame trailer jack # JET-2500 is rated for 2,500 pounds. The rear of your vehicle is compressing its own suspension some so really the jack would not be lifting the full weight of the rear of the vehicle so this jack would work. With that said the higher capacity jack you go with the easier it will be for the jack and the longer it will last. I recommend stepping up to the 3,500 pound model, # JET-3755. For better performance and longevity.
view full answer... - How Sealed is the Motor Housing on the Stromberg Carlson Electric A-Frame Tongue JackI spoke with my contact at Stromberg and he said that the switches are encased in weather proof boots and a plastic housing fits over everything else. When I told him of your concerns due to the issues with your current electric jack, he explained that the only area that moisture could possibly enter the housing is through the access cap. Removing the cap allows you access to override the system should you ever need to operate the jack manually. In this case, once you have removed the cap,...
view full answer... - Will Stromberg Carlson Powered A-Frame Jack Work on Toy Hauler with 900 LB Tongue WeightThe Stromberg Carlson A-Frame Jack, # JET-2500, has a capacity of 2,500 lbs, which should be sufficient to lift the rear of the vehicle enough to take the weight off the system so the bars on your 27' toy hauler's weight distribution system can be installed or removed. Keep in mind that the higher the capacity of the jack relative to the tongue weight of the trailer, the easier it is for the jack to lift the trailer and the longer it will last since only minimal strain is being put on...
view full answer... - Grounding the Stromberg Carlson Trailer Jack on an Aluminum TrailerIn order to ground the Stromberg Carlson Trailer Jack, # JET-2500, I recommend doing just as you said. I would run a wire like # 10-1-1 from one of the mounting bolts to the negative terminal on the battery to ensure an adequate ground.
view full answer... - A Frame Jack Recommendation for 28 Ft Keystone SpringdaleThe Electric A-Frame Tongue Jack, # JET-2500, has a lift capacity of 2,500 pounds. This jack will be a great addition to your 28 foot Keystone Springdale as long as it's tongue weight does not exceed the 2,500 pound capacity. I spoke with my contact at Stromberg Carlson and confirmed that the mounting bolt holes on the jack are approximately 3 inches apart.
view full answer... - Mounting Hole Spacing of Stromberg Carlson Electric A-Frame Jack Jet 2500The JET-2500 Electric Trailer Jack you mentioned does indeed have mounting holes that are the industry standard 3 inches apart on center.
view full answer... - Recommended Electric Tongue Jack For A 7,600 Pound CamperWhat you need to look for will be power and the amount of lift. With your trailer weighing 7,621 pounds, you are looking at a tongue weight of 762 pounds to 1,100 pounds. With that being said, the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 having a capacity of 2,500 pounds, it will definitely be a good option. However, this also will only have 18" of lift (or 27" from the bracket when fully extended), so you will need to make sure this will lift the coupler off the ball...
view full answer... - Recommended Electric Trailer Jack for Coleman CamperFor your Coleman camper, I recommend the Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs # JET-2500. This Jack will ground through the mounting plate and has a built in device to show you when your trailer is level. It will draw about 25 amps under load.
view full answer... - Recommended Trailer Jack For Trailer With 800 Lbs. Of Tongue WeightIn order to choose the correct jack for your trailer, you must first determine what type of jack you will need. You can choose from either an a-frame jack or side mount jack. Once the correct type of jack is selected, you can then begin to narrow your search down based upon weight restrictions. The trailer jack needs to be capable of lifting the tongue weight of a trailer, rather than the total weight of the trailer. The tongue weight of a trailer is typically 10-15% of the total trailer...
view full answer... - Is 2,500 lb Capacity on Stromberg Carlson Electric A-Frame Tongue Jack the Tongue Weight Capacity?The 2,500 lb capacity of the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 is referring to the tongue weight, and is the lift capacity of the jack. I've added links to a pair of video reviews on this jack for you to take a look at as well.
view full answer...
- Recommended Electric Tongue Jack for a 6,000 Lb Travel TrailerA trailer jack only needs to be rated for the tongue weight of the trailer when used in this location (on the tongue). However, it is always a good idea to choose a jack that is overrated for your needs as this will create less stress on the jack which will in turn improve it's life. For your trailer with a hitch weight of 620 lbs, I recommend the Stromberg Carlson Electric A-Frame Tongue Jack part # JET-2500 which is rated for use on trailers with a tongue weight up to 2,500 lbs and will...
view full answer... - Replacement Electric A-Frame Jack for 2024 Coleman Lantern LTI'm not 100% sure which floorplan of the 2024 Coleman Lantern LT you have, possibly the 17R. Regardless, the Stromberg Carlson Electric A-Frame Tongue Jack - 2,500 lbs # JET-2500 will be more than enough for your travel trailer. Even the heaviest of the models wouldn't come close to 2,500 lbs of tongue weight. It wouldn't hurt to get the # JET-3755 if you wanted it to move a little faster but it isn't necessary.
view full answer... - How to Install Replacement Extend/Retract Switch # 7145-226023 on JET-2500 Electric A-Frame JackMy manufacturer contact advised that the four screws you have removed are the only fasteners holding the outer jack cover in place. However, I completely understand your concern about applying too much force on the plastic cover. My contact suggested gently applying a flat blade screwdriver blade around the cover's edges to find the spot that most wants to "give" a little. This point would then be your best spot to carefully apply a bit more force to get the cover loose.
view full answer... - A-Frame Mounted Trailer Jack That Has a Front Manual Crank and Electric OptionSince all of our electric tongue jacks like the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 have the access holes for the manual crank handles on top of the jack, I recommend the Trailer Valet JXC Trailer Jack # TV54FR. This jack has a round mounting plate for the triangular A-Frame mounting holes on your trailer. While it is a manual jack the handle can be removed and the Drill Attachment # TVDA that comes with the jack allows you to use a 18 volt or larger cordless drill...
view full answer... - Electric Jack Recommendation For 30 ft 2013 Forest River TrailerThe Ultra-Fab Electric A-Frame Jack, part # UF38-944017 you referenced would certainly work for your trailer based on the tongue weight you furnished. This jack does have a weight capacity of 3500 lbs, and has an 18 inch lift. it can be bolted on or welded to the trailer, and hardware is not included. Another option I recommend is the Stromberg Carlson Electric A-Frame Tongue Jack, part # JET-2500. It has a weight capacity of 2500 lbs, which is still well within the range you need for...
view full answer... - Recommended Power Jack for Travel Trailer With 500 lb Tongue WeightAlthough the jack you referenced would work well with the amount of weight you mentioned, when choosing a jack I always recommend overkill. Choosing the highest rated jack you can find will mean the jack will not need to work so hard. This means the jack will lift the trailer more quickly and will last longer. I would recommend the etrailer # EJ-3520-WBX powered jack rated for 3500 pounds of lift. Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height...
view full answer... - How Do I Determine Which Electric Tongue Jack To Choose For My Trailer?No you're right on track, a tongue jack like the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 that you mention is not designed to support the entire weight of your trailer, only a portion of the weight. When it comes to choosing an electric tongue jack for your camper, you're going to want to make sure that you're choosing a jack that can support 10-15% of your total tongue weight. So for instance, you mentioned that your 174K Hideout weighs about 5020 when fully loaded,...
view full answer... - Troubleshooting a Stromberg Carlson 2500 Electric Jack not WorkingThe Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 that you referenced grounds through the mounting hardware. It sounds like you have the 12 volt power source connected correctly, but the jack is not grounding properly. You did not say anything about having your jack installed onto your trailer so if you have not yet and you are just trying to test it before you install the jack it will not work until you do so. I attached a link to the installation instructions for this jack...
view full answer... - Recommended A-Frame Trailer Jack For A 2013 Jayco Jayflight 19RDThe Ultra-Fab Electric A-Frame Jack # UF38-944014 will work just fine for your 2013 Jayco Flight 19RD. This jack has the capabilities to lift up to 4,000-lbs of tongue weight, which is plenty for your trailer. While this jack will work for you, I recommend the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500. This jack is going to be closer to your tongue weight, while still offering plenty of remaining capacity.
view full answer... - What is the Amperage Draw of Stromberg Carlson Powered A-Frame Trailer Jack # JET-2500When under load, the Stromberg Carlson jack, # JET-2500, draws 24 to 25 amps. Provided that the 12 volt battery on your trailer has the capability to provide this much power while running the other things tied into it or not, you can use this jack. Powered jacks with the same capacity, see link, have about the same power draw, no more than 30 amps.
view full answer... - Stromberg Carlson JET-2500 Jack for Coachman Cascade Travel TrailerThe Stromberg Carlson # JET-2500 Electric Trailer Jack you referenced has a lift capacity of 2500 lbs. The jack will work just great for trailers with tongue weights less than 2500 lbs, the tongue weight of your Coachmen Cascade should certainly be less than that. I have edited a photo for you showing the various dimensions and clearances related to the jack. The dimensions I provided should let you know if you will have clearance for your propane tanks.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Installed by:
Jeff D
Installed by:
Randy B
Updated by:
Adele M
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Mike S
Updated by:
Noah M
Video by:
Sue W
Video Edited:
Chad S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Craig H.
2/17/2015
thanks for the photo. i purchase a crossroads z-1 23 foot camper and im going to buy the same jack.