Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418
(39 reviews)
Price: $49.23
In Stock
Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418
Item # DL22414
Retail:$87.30
Our Price: $49.23
You Save: 44%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (39)
- Q & A (0)
- Videos (1)
- Photos
Dutton-Lainson Accessories and Parts - DL22414
- Camper Jacks
- Trailer Jack
- Jack Wheel
- Wheel w Caster Assembly
- Dutton-Lainson
Features:
- Fits Dutton-Lainson 1,000 lb. A-frame jack (DL22530)
- Capacity: 1,000 lbs
- Zinc TUFFPLATE finish
- Provides three times the corrosion resistance of standard zinc plated trivalent chrome process
- Has 30 percent greater corrosion resistance when compared to powder coated finish
- Includes quick-attach pin for easy removal
- Made in the USA
22414 Dutton-Lainson Removable Wheel Model 6604 for 1,000 lb A-frame Trailer Jack by Dutton-Lainson Model 6418
Video of Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dutton-Lainson A-Frame Trailer Jack Removable Wheel Review
Today we're going to be taking a look at the Dutton Lanson removable wheel for Dutton Lanson A-frame trailer jacks. Part number DL22414. It's a six inch diameter wheel, it's made out of a solid thermoplastic material, it's going to stand up to the elements and many years of use. With it installed, it's easy to maneuver in your shop, garage, or driveway. The best part about it being removable, is that when you're ready to tow, or put on a different accessory, simply pull the pin, take it off, and you're done. It has a 1000 pound weight capacity, it spins 360 degrees, there are no bearings to replace.
It just spins on a bushing, there's less maintenance required. It features a zinc, tough, plate finish, which provides three times the corrosion resistance than a standard zinc plate finish. That's going to complete our look at the removable wheel for Dutton Lanson A-frame trailer jacks, part number DL22414.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 - DL22414
Average Customer Rating: 4.6 out of 5 stars (39 Customer Reviews)
by: Keith01/11/2023
Happy to find jack wheel for non-standard tube diameter. This one is 2" outer diameter, and went onto my (approximately) 1.75" tube. Seems sturdy enough for my light trailer.
by: Fred 12/06/2022
With no knowledge of what brand jack I had on a 25 year old trailer,and armed with the world wide inter-web, I was tickled to find a business with such an excellent website with the solution I needed. The "obsolete" non-modern standard jack post (most all are 2"ID these days) was easy to identify, order and was in hand quickly with professional aplomb. Thank you etrailer.com!
by: Leanea06/05/2022
I originally ordered the bulldog 6" wheel but after submitting my order I immediately received an email from etrailer telling me that it was not in stock till a later date and if I wanted to replace it with the Dutton-Lainson wheel which was already in stock. So I assumed the wheel would fit the jack i ordered however the person who had emailed me about this did not know what they were doing because it did not fit. I should have never modified my order and listened to this person.
by: Ron10/10/2022
It fit my 1 7/8 tongue jack, the only one I found that fit. I would give it a hire rating if it had a tightening bolt like other similar products. Shipping and Tracking were excellent.
by: Eric10/21/2022
The description of the product made me think that they went together but it doesn't fit the jack that I purchased. the Jack is great though and now I ordered a different wheel.
by: Charlie 04/14/2020
Still happy with it. It's an unusual pole diameter width, which after a long search, I could only find on your website. So thanks for having something for every size. I did have to drill holes to fit, since the ones on my trailer didn't match up with the ones on the wheel, but that was easy and no big deal.
Charlie L.
4/15/2021
Great. Perfect fit. Easy to remove and re. Initially I had to drill different holes to make it fit with the shaft that was welded to the trailer frame. But I anticipated that and that was no problem.
by: Dave11/21/2018
Hello - We ordered the Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 Item # DL22414 as a replacement wheel for our 2001 Starcraft pop-up travel trailer. Our pop-up model # is 2107. We needed a replacement wheel because we lost the wheel on a recent campout. At first, we bought something similar locally but the opening was too big. It worked a temporary fix, but this one that we bought from etrailer.com is a much closer fit. A little loose but it will do the job. Thank you.
by: Pam R03/09/2017
I purchased this wheel previously for a pop up tent camper. Recently, I
purchased another camping trailer and the wheel that was supplied collapsed
when the axle failed. I liked the one I bought from etrailer for my pop up and
decided to have the comfort of knowing it would not fail me at an inopportune
time. I did have to drill out my jack which was no problem in order to be able
to insert the pin lock as the old wheel just slid on and had a twist lock which
was not that secure. This is a very sturdy wheel.
by: Ed09/16/2016
*Although I have not installed the trailer jack yet it looks like a direct replacement for the original one on my boat trailer. The wheel that goes with the jack definitely looks like a better fit than original.
*The electrical 4 conductor plug set... I'm using for a quick disconnect for a third
( center ) brake light for tailgaters
by: Charlie09/18/2021
After scouring the internet for the odd-sized inside diameter of 1 7/8" for a trailer tongue wheel, the only place that had one was etrailer. Nice to know they are taking care of the people who don't always have the standard size of something.
by: Michael 05/01/2020
Product was exactly what I needed. It fit odd sized electric jack base. All I had to do was drill cross pin hole in base. Product came with the latch pin (was not expecting that) so was a pleasant surprise. Looks like good quality.. will see how it stands up to use this summer if the parks ever open back up.
by: Greg09/15/2014
I bought the a frame jack with wheel and flat stand. It fit perfectly. What I really appreciated was the detailed information etrailer folks provide. I emailed a few questions and they got back to me right away. Very good experience overall.
by: BrentK08/18/2020
Quality part, reasonable price. Does what it's supposed to do. Easily installs/removes.
etrailer is great!
Brent K.
8/19/2021
Holding up just fine after one year!
by: keith y07/17/2014
I appreciate the good service and prompt delivery. The tongue jack will work great on my 1955 Aljo camp trailer, with little modification. Thanks for your help.
by: Gary 06/17/2020
Worked perfect , thanks goes out to etrailers experts
Gary
6/18/2021
Excellent
by: Fred08/19/2015
1.75 ID removable caster wheel is just what I needed. Hard to find part.
by: Monty 05/09/2020
Great rugged wheel with pin. Works good when you just need to move your trailer around in the garage .
by: James11/02/2018
Just what was needed to fix the problem! Fit was just right.
James
11/3/2019
Great fix for the trailer and very helpful follow up on the product.
by: Woodjunky09/10/2017
Just what I needed. Ordered on Friday and it was here on Saturday.
Woodjunky
9/10/2018
I love the products and the value. The lights and jack are hard at work on my boat trailer. Thanks for the follow up.
by: Luis G12/28/2019
Good value & quick shipping. Fit like a glove works like a charm.
by: Michael 05/11/2021
everything worked out fine.the products i recieved were what i was looking for.thamk you
by: Teena04/12/2016
Perfect part. Easy to use, durable and inexpensive. Love it!
by: Scott 06/07/2020
Fit perfectly. Just drilled the hole in the tube for the pin. 5 mins and it is on to stay.
by: Al06/23/2023
by: Steve 10/02/2022
25
39
Show More Reviews
See what our Experts say about this Dutton-Lainson Accessories and Parts
- Replacement Wheel Caster for Dutton Lainson 6400 Series JackYes the wheel caster part # DL22414 is the correct wheel caster for a Dutton Lainson 6400 series trailer jack like you mentioned.
view full answer... - Functionality of Dutton-Lainson Removable Wheel Part DL22414The Dutton-Lainson removable wheel for A-frame jack # DL22414 does swivel. It is compatible with Dutton-Lainson model 6418 trailer jack # DL22530. The wheel does not have bearings between the hub and sleeve. It will have a quick-attach pin for easy installation and removal. The wheel will make it easy to maneuver the trailer into the hitching position. It's recommended that the wheel is removed before travel. I have included FAQ and a couple video reviews for you as well.
view full answer... - Are Rubber Wheels Available for Dutton-Lainson A-Frame Trailer JackThe Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 # DL22414, which fits Dutton-Lainson Jack # DL22530 does not have a rubber wheel available. I looked through each of our jack wheels with casters as well as the wheels by themselves and there are no rubber wheels for these jacks.
view full answer... - What Is The Collar Inside Measurement Of The DL22414 Trailer jack Wheel?The Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 # DL22414 is compatible with the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 which has an outer diameter tube 2 inches and the inner diameter at 1-3/4 inches. This wheel fits inside that tube, so the diameter is 2 inches on the outside and 1-3/4 inches on the inside. I went out to our warehouse to measure it and confirm.
view full answer... - Will Removable Wheel for Dutton-Lainson A-Frame Trailer Jack # DL22414 Fit Jack w/ 1-3/4The Removable Wheel, # DL22414, was designed to be used with the Dutton-Lainson 1,000 lb A-Frame Trailer Jack, # DL22530, which has an inner tube / down tube diameter of 1-3/4 inches so this may work for you. This wheel is intended to be held on to the jack tube with a snapper pin. Please keep in mind that Dutton-Lainson designed their accessories to be used with their jacks. Since this wheel has not been tested with other brands of trailer jacks, we can not guaranty it's compatibility.
view full answer... - Replacement Wheel for Trailer Jack With 1-3/4" Diameter Inner TubeWe have one wheel that you may be able to use, which is the Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 # DL22414. This is designed for the Dutton-Lainson DL22530 which has a 1-3/4" diameter inner tube. However, since it was designed specifically for the DL22530, and I have no way of knowing which jack you have, there is no guarantee it will work.
view full answer... - Recommended Caster Wheel for Jack with 1-3/4" Inner TubeThe Removable Wheel for Dutton-Lainson A-Frame Trailer Jack part # DL22414 is designed for a 1-3/4" inner tube so it should work. That said, we don't carry any Carry On specific replacement jack parts.
view full answer... - Wheel Caster for Dutton Lainson Trailer Jack DL22530For the Dutton Lainson trailer jack part # DL22530 that you referenced we have the replacement wheel part # DL22414.
view full answer... - Recommended Trailer Jack to Replace ALKO Jack with 2 Inch Outer DiameterThe best option jack we have that has a 2 inch outer diameter is the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 which can use the landing foot # DL22541 or the caster # DL22414. This obviously has the A-frame mount integrated but is the only option we currently have for a 2 inch outer diameter jack. Most of the inner tubes have that diameter. If you'd like to consider a different style mount, I'd be happy to help further, I just need the trailer capacity...
view full answer...
- Replacement Parts for Dutton Lainson Trailer JackWe do offer both replacement parts and complete Dutton Lainson trailer jacks. All complete jacks can be view by clicking on the linked page. All Dutton Lainson jack replacement parts can be viewed by clicking on the other featured link. You can use the filters on the pages to select your type of jack and the type of replacement part you need, such as caster wheel # DL22414 that fits their a-frame jack # DL22530. I checked with Dutton Lainson for your part number 203960B but this was not...
view full answer... - Recommended Foot with Pin for a 1000 lb Trailer Jack A 1,000 lb jack like the A-Frame Trailer Jack - by Dutton-Lainson # DL22530 has a smaller diameter like you stated. This jack has a diameter of 1-3/4 inches for the inner tube. For this jack you would want the Removable Steel Foot with Pin for DL22530 A-Frame Trailer Jack by Dutton-Lainson # DL22541 or wheel # DL22414.
view full answer... - A-Frame Trailer Jack Recommendation with Outer Tube Diameter of 2 inchesIt is harder to find trailer jacks with 2 inch outer tube diameters, but the Dutton Lainson part # DL22530 does have that outer tube size. For a foot you'd want the part # DL22541 and then for a wheel part # DL22414.
view full answer... - Recommended A-Frame Jack With Close To A 1-7/8 Inch DiameterFor an A-frame jack that meets that diameter criteria, I recommend the A-Frame Trailer Jack by Dutton-Lainson # DL22530 . This jack will have an inner tube diameter of 1- 3/4 inches and an outer diameter of 2 inches. It is constructed of heavy duty steel and has a zinc plated finish to resist corrosion. With this jack, I recommend the foot plate # DL22541 or the wheel # DL22414. These inner and outer dimensions are as close as we come to the 1-7/8 inch diameter.
view full answer... - Replacement Sidewind A-Frame Trailer Jack with 2 Inch DiameterThe jack mounts used on a-frame trailers usually follow an industry standard pattern which is a 2-1/4" hole opening and three mounting holes spaced 3" apart. I have attached a photo to show this for you as well. If your trailer coupler does not follow this pattern and you indeed only have a 2" diameter hole to fit the jack through then I recommend using the A-Frame Trailer Jack part # DL22530 which has an outer tube diameter of 2". As long as the tongue weight of your trailer does not...
view full answer...
- A-Frame Trailer Jack Recommendation with Outer Tube Diameter of 2 inchesIt is harder to find trailer jacks with 2 inch outer tube diameters, but the Dutton Lainson part # DL22530 does have that outer tube size. For a foot you'd want the part # DL22541 and then for a wheel part # DL22414.
view full answer... - Recommended Replacement A-Frame Trailer Jack for 2003 Viking Legend TrailerTo replace the AL-KO A-Frame jack on your 2003 Viking Legend Trailer, I recommend the Dutton-Lainson A-Frame Trailer Jack # DL22530. This A-frame jack features a 1,000 pound weight capacity, a 2 inch outer tube diameter and 15 inches of total travel. It has a distance of 15-1/4 inches from the bracket to the top of the jack. You can add a removable foot with part # DL22541 or a caster wheel with # DL22414. You will just want to make sure this has the necessary capacity for the tongue weight...
view full answer... - Recommended A-Frame Trailer Jack for Tongue Weight of Less Than 500 lbsAn A-Frame Trailer Jack only needs to have the capacity to lift the tongue weight since it is positioned on the trailer tongue. For a trailer with a dry tongue weight of under 500 lbs I recommend the Dutton-Lainson A-Frame Jack # DL22530; you could then add a foot plate with # DL22541 or wheel with # DL22414 depending on what you need. I've added links to video reviews of these products for you to take a look at as well.
view full answer... - Recommended Replacement For A-Frame Trailer Jack For 1999 Jayco Heritage Laurel Trailer For an A-frame jack that matches, I recommend the A-Frame Trailer Jack by Dutton-Lainson # DL22530. This jack will have an inner tube diameter of 1-3/4 inches and an outer diameter of 2 inches. It is constructed of heavy duty steel and has a zinc plated finish that will help it resist corrosion. With this jack, I recommend adding the Removable Foot Plate, Item # DL22541 or the Removable Wheel, Item # DL22414. I have attached an article and a video for you to check out.
view full answer... - Is There A Trailer Jack Compatible With 1-1/2 Inch Hole On Vintage Trailer?The smallest diameter jack we have with a footplate or wheel is the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530. This is 2 inches in diameter at the top and 1-3/4 inches at the bottom, so you will need to enlarger the jack hole in your coupler. This is compatible with the Removable Wheel # DL22414 and the Removable Steel Foot with Pin # DL22541. I've attached a couple videos to assist.
view full answer... - A-Frame Jack with Outside Tube Diameter of 2 Inches Not 2-1/4 InchesFor your Jayco 98 camper, I recommend using the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530. This has an outer tube diameter of 2 inches and an inner tube diameter of 1-3/4 inches. Then you can use Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 # DL22414 or foot plate # DL22541. This is the only option that is 2 inch outer diameter. If you want a stronger jack then you will need to grind that bottom plate for compatibility with the larger...
view full answer... - A-Frame Trailer Jack with Outside Tube Diameter of 2 inchesIt is harder to find trailer jacks with 2 inch outer tube diameters, but the Dutton Lainson part # DL22530 does have that outer tube size. For a foot you'd want the part # DL22541 and then for a wheel part # DL22414.
view full answer...
- Recommended A-Frame Trailer Jack to Replace Existing Jack with Small Diameter Coupler MountMost jacks have an outer tube diameter of 2-1/4 inches. We do have a jack that is slightly smaller with the outer diameter being 2 inches. It is the Dutton-Lainson A-Frame Trailer Jack # DL22530. This will be a great option for your 1948 Mobile Sportsman Camper but you will need to enlarge the hole on your A-frame coupler. I recommend using a rotary tool like a Dremel or a hole saw to enlarge the opening in your coupler for proper mounting. Then you can use the caster # DL22414 or...
view full answer... - Recommended Replacement Jack with Wheels for Atwood A-Frame Jack 80274Thank you for being so detailed with your question, it was really helpful and we do have a jack that meets all of your needs. To replace your Atwood A-Frame 80274 I recommend the Dutton-Lainson A-Frame Trailer Jack # DL22530 that you mentioned, because of its quality and the fact it meets all of your criteria. You only need to add Removable Wheel # DL22414. Like you mentioned, this jack has a 1-3/4 inch inner tube, bolts on, can use the aforementioned wheel, has a 1,000 lb capacity which...
view full answer... - Recommended Replacement Jack for AL-Ko MD285 Trailer JackI may have a solution for you, but we don't have anything that matches your AL-Ko MD285 jack. You could likely make the Dutton Lainson # DL22530 jack you were looking at work, and you'd just need to add the caster # DL22414. This Dutton Lainson jack is designed for trailers with tongue weights of up to 1000-lbs, so it would be able to handle your 1700-lbs trailer easily and provides 15" of lift. The other option that might work is the Bulldog Heavy-Duty, Rack-and-Gear Jack with Steel...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Written by:
Laura H
Video Edited:
Dustin K
Video by:
Chris R
Video by:
Zach D
Installed by:
Hayden R
Installed by:
Brent H
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
6/9/2022
I understand your frustration as no one wants to return part that will not work for them. I will have our customer service team reach out to you. For the Bulldog jack part # BD150415 you can use wheel part # BD500245.