Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
(104 reviews)
Price: $241.27
In Stock
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
Item # SC63VR
Retail:$284.01
Our Price: $241.27
You Save: $42.74
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (104)
- Q & A (0)
- Photos
Stromberg Carlson Camper Jacks - SC63VR
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 23 Inch Lift
- Stromberg Carlson
- Bolt-On
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.
Features:
- Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily
- Top-mounted toggle switches are easily accessible
- Large LED side lights make it simple to set up your camper at night
- Also ease weight distribution hookup and disconnect
- Bubble level on top of housing helps you level your trailer
- Bull's-eye design shows front to back and side to side
- Drop leg allows for greater adjustability
- Rust-resistant powder coated steel parts are strong and durable
- Housing is made of vacuum-formed plastic for protection from the elements
- Black cover is painted to resist fading
- Round, zinc-plated steel footplate provides stability
- Emergency crank (included) allows you to manually operate jack if needed
- Easy bolt-on installation for A-frame trailers
- 3 Star washers included for making a good ground from jack to trailer
- Mounting hardware sold separately
Specs:
- Total lift: 23"
- Screw travel: 18"
- Drop leg: 5"
- Lift capacity: 4,500 lbs
- 2-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
JET-4500 Stromberg Carlson Electric A-Frame Trailer Jack - Black - 23" Lift - 4,500 Pounds
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Defective
- Arrived Damaged
- Wrong item was ordered
Customer Reviews
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black - SC63VR
Average Customer Rating: 4.6 out of 5 stars (104 Customer Reviews)
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.by: Robert H05/02/2023
This was a great replacement for our 4 year old Keystone Springdale trailer jack that bit the dust. Installation was easy and is much faster and quieter than our RAM jack that came with the trailer. I did sand down the paint on the contact points to make sure of a good ground then painted over what was exposed. I liked it so much I'll be looking at getting one for my large utility trailer.
by: Grant 05/16/2024
It arrived quickly and I installed it the same day. Installation was simple and straight forward. It works great. I highly recommend. I installed this jack on a Lance 1575 travel trailer. So glad I finally did this!
by: Mark 01/01/2024
Shipping was exceptionally fast, the jack works great, although I can for see the rubber on the toggle switches will probably either wear quickly or possibly the weather/sun will deteriorate sooner than later.
by: Steve10/11/2023
So far not satisfied with this jack. It was easy enough to install BUT the up down switch is reversed so up is down and down is up. The motor will make 1 lift and shut off for 10 sec. or so. defantley not worth this kind of money
Jenny N.
10/16/2023
It does sound like this jack may need replacing. I will have our Customer Service team reach out to you to assist.
by: Jeff 02/24/2024
Great product, should include wiring in structions.
by: Anthony 12/04/2023
we ordered the jack .It shipped quickly. easy installation no problems works great.
by: Randall 04/30/2024
Works excellent! Highly recommended!
by: Keith 09/16/2023
The Strindberg jack works like a charm. I especially like that it automatically shuts off before it runs out of jack room on the shaft, both up or down. Really great product.
by: 50Gage03/01/2024
The jack is great. Works perfectly.
Not too happy with whatever delivery service was used. Left this leaning against my mailbox at the edge of the street…
But it came quickly and wasn’t stolen.
by: David03/21/2023
Nice unit, dropped right in. Goes up and down. Haven’t used it yet under load, but sure makes it easier to connect and disconnect the trailer.
by: Tony 06/22/2023
Jack installation was quick and easy. I have bought a lot of trailer equipment from Etrailer and they have been very good company to deal with.
by: Marvin 04/10/2024
Great jack for the money!
by: Bradford05/20/2023
This jack did not work right out of the box. It would retract but would not extend. Not only that, but when I tried to use the manual jack handle the unit would not work either. I had to use a bottle jack to get the trailer off my truck. etrailer was extremely helpful and helped me choose a different unit. They promptly sent to me the return shipping label for this defective unit.
by: Randall 11/28/2021
Thank you etrailer people for your fine service. I can not really rate this jack until I use it for at least a few months. But I can say that this electric jack works great just out of the box and it came with all the proper hardware for a good installation.
Randall
12/2/2022
Well a year later and all is well. We treat our jacks well and completely cover them in a plastic bag.The switches can be operated with the bag on.
by: Gary 12/02/2023
Very easy to install. Much more sturdier then the previous one.
by: Mark 12/29/2023
Installed easily with the parts provided. Works smoothly and quietly.
by: Philip03/13/2023
The new SC jack shipped quickly. Easy to install on my 20 ft. power tilt car carrier because I was only replacing a cheap electric jack from [online vendor] that had just failed rather than a new install.
I did have to turn the star washers over because the pointy side has to scratch through the paint to make a good ground contact but everything else was easy-peasy. You can tell that this new jack is a much more quality product. Works great/ much quieter than the old power jack. Thanks etrailer!!
by: Steven06/21/2023
The jack is in a slow failure mode. There seems to be some resistance in the jack as it keeps getting slower and slower at one year old. I’m waiting for the day it completely stops working. Voltage and ground are normal.
Katrina B.
6/29/2023
I have gotten in contact with the manufacturer. We are needing some more information in order to assist you better. Do you have a 30 Amp Fuse attached correctly? Make sure it is not loose or anything. Also please check to make sure that you have at least 12 volts coming to the jack. If it is less then 6, you will need to recharge the battery or change it. Also please look at all the wires inside the head of the jack to make sure nothing has come loose. One thing it could be, is if the jack was not hooked up as the instructions state, then it could be an issue with something in the RV. This is not a normal thing to happen with a jack that is one year old.
by: Allen05/12/2023
I just installed the jack and haven't had chance to use it yet
I will know more next week when i return from camping to let you know how it performs
As far as delivery I am well satisfied with the amount of time in which I received it
Thank You
by: Harry 12/12/2023
This 2nd elec Jack I’ve purchased & very happy with them
by: Mike02/26/2023
etrailer helped me with no questions asked when a product came damaged by UPS. Got me a replacement before I could even box up the broken one to ship back.
by: Michael02/27/2023
Sent an open package we should have refused!! It turned out to be defective. Took my time to install for nothing!!! Thank God Stromberg is sending a replacement. Leaves a bad tast to ever order from etrailer again. They dumped a unit on us that should have been tested first!
by: Brian 06/02/2023
Came fast and installed it, it works up and down so got to see how long it last. Was easy to install and hooke would recommend if it for better than a hand crank
by: Harold05/16/2023
Box was in bad shape jack was up side down in box up looks ok you need to look at your packing
by: John 12/17/2022
Was ready to move our trailer to winter storage and found out that the electric jack was frozen up. Would not even hand crank. Needed a new jack fast. New trailer jack from eTrailer came in only two days in spite of snow storm. Easy to install so we are back in business.
25
104
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Is There a Way to Replace Cracked Screen on Lippert Smart JackThe only way to get a new control panel would be to replace your entire Smart Jack with part # LC643589. I reached out to my contact at Lippert who confirmed that the only replacement parts for the jack includes hardware like the pin or the footplate. With this being the case your best option to protect the buttons is a trailer jack cover like part # UF38-944020. If you'd rather use a different jack then I recommend the Stromberg Carlson # SC63VR because it is rated for 4,500 lbs, features...
view full answer...
- Replacement Switch Recommendation for Husky Brute Powered Trailer Jack HT87247Since you have already tested the switch and found it to be defective it will need to be replaced. The original part is no longer available, but could potentially be sourced through an electonics supply store. If the jack has more problems and must be replaced I can make a recommendation. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may...
view full answer... - Can an Ultra-Fab Electric Trailer Jack that has Been Over Extended be RepairedThe way that the electric trailer jack # UF38-944017 works is using an ACME screw and a nut. The nut is fixed and the screw goes up and down in the nut. At the end of the screw the metal is twisted, smashed, or otherwise purposely cross threaded to prevent the screw from just coming out and the load dropping. If you try to raise a jack with this type of design too far it damages that nut and the screw. Those parts cannot be replaced. You will need to replace the whole jack. This is not...
view full answer... - Replacement Lippert A-Frame Jack Solution for Jack with Bad GearsIf you have a Lippert powered A-frame jack like the part # LC285318 and it has bad or damaged gears your only solution will be a new jack as the gears are not available as separate items. That said my favorite powered jack to recommend is theStromberg Carlson # SC63VR, as it has tremendous lifting power and it also shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads of the screw like it sounds...
view full answer... - Best Replacement for the Lippert Smart Jack Electric Trailer JackThe Lippert Smart Jack Electric Trailer Jack part # LC643589 is a good innovative option with memory features but it does have a design flaw in my opinion. The touchpad or controls are on the top of the jack. The reason that this is a problem is because the seals around the controls break down over time and water gets inside ruining the jack. This could be attributed to rough use, bad seals, but the touchpad being directly on the top of the jack means water can come straight in as opposed...
view full answer... - Electric Jack Recommendation for an A-Frame Trailer that weighs 10,000 lbsWe don't have exactly what you are looking for, but it sounds like you would rather have a powered jack like the part # SC63VR. The only thing is this is a 4,500 lb jack, meaning that it can lift a tongue weight of 4,500 lbs which in most cases is way more than what a-frame trailers will have. Your 10,000 lb trailer would most likely have a tongue weight of 1,000-1,500 lbs. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds...
view full answer... - Can Electric Trailer Jack Lift Trailer With Weight Distribution SystemIt is possible that the Electric Jack w/ Footplate - A-Frame - 25-1/2" Lift - 3.5K - Black # e69ZR will have enough power to raise the trailer enough with the weight distribution hitch installed, but unfortunately there is no formula to make sure. If your trailer is relatively light it should have no problems, but if you are in the 800-1000lb tongue weight range a higher rated trailer jack would be a better idea. I recommend taking a look at the Stromberg Carlson Electric Trailer Jack...
view full answer... - Troubleshooting A Stromberg Carlson Jack That Will Retract But Not ExtendI recommend first ensuring that your ground is good as the ground is typically the number one issue when it comes to wiring issues. From there the next thing to check would be the switch, as this part is usually the first to go out. We don't currently have a replacement switch for the Stromberg Carlson Electric Trailer Jack # SC63VR so if this was the cause (which I'm definitely leaning towards) then you would have to reach out to the manufacturer or completely replace the jack itself.
view full answer... - Recommendation for a Replacement Electric Tongue Jack for a 2011 Rockwood Roo TrailerWe carry the Lippert Electric Trailer Jack w/ Footplate, # LC285318
view full answer... - Is Lippert LC285318 Power Jack A Suitable Replacement For LCI Power JackThe center-to-center measurement between the bolt holes on the Lippert Power Jack you referenced, part # AT81070 is the industry standard 3 inches. Since you said that is the measurement you have on your LCI jack you want to replace, this would be a perfect replacement for you. Lippert and LCI are the same company. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models,...
view full answer... - Electric A-Frame Tongue Jack for 1998 Sundowner Horse TrailerSundowner made both bumper-pull A-frame trailers and gooseneck trailers in 1998 but it sounds like you have a bumper-pull A-frame type and need an electric tongue jack. We like to suggest using an electric tongue jack with more weight capacity than you will actually need, since this this tends to improve both reliability and the jack's working lifespan. One of the best options is the Stromberg Carlson # SC63VR. Unlike most jacks, this one has stops that prevent over extending or retracting...
view full answer... - USA Made Trailer Axle, Wheel/Tires, and Trailer Jack for 3,500 lb Trailer AxleDexter axles like the part # 35545E-ST-89 that you referenced are made in the USA. This is a 3,500 lb axle like you want but you need to determine which is the correct length axle for your trailer first. I've attached a photo showing where to measure your axle for the correct length. I've also included a link to our axle product listings. Once you know your measurements, you can use the filters on the left side of the page to choose the correct axle. Or, if you'd like, you can send me...
view full answer...
- Powered A-Frame Jack Recommendation for 2017 Keystone Passport 2670BHWEMy favorite powered jack to recommend is the Stromberg Carlson # SC63VR as it has tremendous power which allow it to operate quicker and smoother. It also shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads of the screw. It has a lifting capacity of 4,500 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a long time. If you are considering...
view full answer... - Husky Brute Jack Has Light On But Will Not Go Up Or DownSince you did not say if this was a new installation, or if you have had the jack for a while, there are a couple things you can check to find the problem with the Husky Jack. Since it is grounded through the mounting hardware you will want to make sure the hardware is securely fastened, and the attach points are not corroded and preventing a good ground. If the ground checks out, you can check out the wiring to the switch for raising and lowering the jack with a circuit tester like part...
view full answer... - Tailgate Clearance for the Stromberg Carlson Electric Trailer JackI would be happy to help you. Based on the information you have given me I am going to give you the height of the Stromberg Carlson Electric Trailer Jack Item # SC63VR you referenced. This jack sits 21 1/4" above your trailer's frame. You will just need to hook your trailer up or raise it to where you would have it when your tailgate is down. If this jack doesn't work go ahead and send me an email with the height you are looking for and I will try to find you a jack that will work or we...
view full answer...
- Jack Capacity and Recommendation For 2004 Hornet KeystoneSince the trailer jack is only supporting a portion of the trailer's weight, I recommend a 4,500 lb jack for your 10,000 lb trailer. The tongue weight of your trailer should between 1,000 lb to 1,500 lbs so a 4,500 lb jack would be more than enough capacity for your trailer. Going with a higher capacity than needed allows the jack to work with ease. It will complete the job faster and it will last longer. I recommend the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame -...
view full answer...
- Troubleshooting Husky Powered A-Frame Jack that Only Lights Work OnSounds like a switch is bad on the Husky jack. This would have to be sourced at an electronics store. Also, the power supply feeding the jack may not be sufficient for the load to raise and lower the jack; the 12v feed on a vehicle 7-way may not be delivering amount of current the jack needs. A power jack often needs a dedicated trailer-mounted battery to get the required lifting power. If you do have a dedicated battery, check and make sure you have a good ground at the jack mount with...
view full answer...
- Replacement Jack Recommendation for Damaged Bulldog Powered A-Frame JackThat is a really frustrating way to damage a jack. I wish we had the components you'd need to fix your Bulldog part # BD500200 that you referenced but Bulldog basically only offers replacement switches for this jack. You are going to need a new jack. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will...
view full answer... - Can a Single Stabilizer Jack # LC298707 Be Installed on Coleman Clipper and See BenefitsWith just a single one of the Lippert Components High-Speed Power Stabilizer Jacks # LC298707 installed on your trailer you'll get a lot of benefit. You'll be able to level and stabilize the jack and can use your crank jack out on the front of the trailer to help as well. My favorite powered jack to recommend is the Stromberg Carlson # SC63VR, as it shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage...
view full answer... - Powered A-Frame Jack Recommendation for R-Pod Trailer for Installing Weight DistributionFor your trailer all of our powered A-frame jacks would fit and work well. I really like the Stromberg Carlson Electric Trailer jacks like part # JET-5000 or # SC63VR. I would recommend the # JET-5000 because it has a 5000 pound capacity which wouldn't have to work as hard, would be faster, and would last longer as a result.
view full answer... - Recommended Electric A-Frame Jack for a 2016 Keystone Hideout 29BKSFor your 2016 Keystone Hideout 29BKS, I recommend going with the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White # BD500200. This includes 3 LED lights making it easy to set up at night and the built-in level has springs for simple, accurate leveling. With the drop leg and 22 inches of lift, it is an ideal choice for just about any trailer.
view full answer... - Powered Trailer Jack Recommendation for a Trailer that with a Weight DistributionSounds like going to a higher rated electric tongue jack would be your best option. The higher rated jacks are great for using when installing a weight distribution, but there's not way exactly to know how much capacity you would need so we recommend going with the highest one just to be sure. I would recommend the Stromberg Carlson # SC63VR. This is a 4,500 lb jack that I can guarantee will have enough capacity for your setup and would be your best option. This jack has a clutch that...
view full answer... - Electric A-Frame Trailer Jack and Battery Box Recommendation for an Enclosed TrailerYou can get a jack and battery box from us, right here at etrailer! For a battery a 12 volt car battery will work fine. It doesn't have to be the fanciest battery (since they are getting so pricey these days) so long as it has the amperage rating for the draw of the jack you use. For a battery box you could use # 329-HM327BKS for group 27 batteries. The interior measures 13-3/16" long x 7-3/16" wide x 10-1/8" deep so the battery will need to fit those dimensions. It comes with mounting...
view full answer... - Troubleshooting Bulldog 3500 lb Electric Trailer Jack That Does Not Fully Retract Without LoadUsually when this occurs, it's because the jack has been over extended; there is a small lock nut in the channel on the inner tube of this jack that if it's over extended will cut into the V channel on the inside. When this happens, it damages the functioning of the jack. This was confirmed with my contact over at Horizon Global, who own Bulldog. Because of this, you're likely going to need to replace it. A good replacement for your jack would be the Bulldog # BD500187, which is the same...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Mike S
Installed by:
Adam E
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert H.
5/3/2024
Still working great after a year of use