Can You Replace Stock Coupler On A 2023 ATC Raven Car Hauler With Demco Coupler # DM13205-95
Updated 12/12/2022 | Published 12/11/2022
Products Featured in This Question
Question:
Will this fit my 2023 24foot ATC Raven Car Hauler
asked by: Greg Z
Helpful Expert Reply:
Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for you.
When installing the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95, you will want to use 3/8 inch grade 5 bolts, that are approximately 1-1/2 inches long. Ten bolts will be needed five bolts on each side. For extra security I also recommend the Master Lock Adjustable Trailer Coupler Lock # 2847DAT.
If you have any further questions feel free to reach back out to me anytime and I would be more than happy to further assist you in your towing endeavors.
(click to enlarge)
Product Page this Question was Asked From
Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Bolt-On
- 21000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Auto Latch
- 2-1/4 Inch Hole
- Marine Grade
- Demco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
- Search Results: trailer brake cable
- Search Results: trailer jack
- Search Results: fenders
- Search Results: breakaway switch
- Search Results: dump trailer tarp
- Search Results: 7 way molded trailer wire connector
- Search Results: trailer breakaway switch
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K
- Shop: TowSmart 7-Way Connector w/ LED Illumination - Trailer End
- Shop: etrailer High-Low Fixed Adapter for Tow Bars - 2" Hitch - 4" Rise/Drop - 10K GTW
- Shop: etrailer High-Low Fixed Adapter for Tow Bars - 2" Hitch - 2" Rise/Drop - 10K GTW
- Video: Feature Breakdown: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole
- Q&A: Bolt Size to Install Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch
- Q&A: Replacement A-Frame Coupler for 2-5/16 inch Hitch Ball with Higher Weight Rating
- Shop: Blue Ox Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 4" Rise/Drop - 10,000 lbs
- Shop: Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2-5/16" Ball - 21K
- Q&A: Demco Coupler Dimensions For 50-Degree A-Frame Trailer For Fabricated Frame
- Q&A: Replacement For 8,000 lb A-Frame Trailer Coupler With 2-5/16 Inch Hitch Ball
- Q&A: Solution for Gaining Clearance Between Tailgate and Trailer Jack
- Q&A: 2-5/16 inch Ball Coupler that Can be Disconnected When Under Tension
- Q&A: Can Steel Trailer Couplers Be Attached to an Aluminum Trailer?
- Shop: Trailer Wiring
- Video: Installation: Curt Spectrum Brake Controller w/ Custom Harness on a 2020 Chevrolet Colorado
- Video: Ultimate Overview of the Curt Spectrum Brake Controller w/ Custom Harness
- Video: Setting up the Curt Spectrum Brake Controller w/ Custom Harness on a 2021 Jeep Gladiator
- Shop: Trailer Hitch
- Video: Comprehensive Review: Ultimate Trailer Jack
- Video: Ultimate Overview of the Bulldog Heavy-Duty Cast Head Coupler w/ Wedge Latch
- Video: Review of Demco A-Frame Trailer Coupler - EZ Latch Coupler - DM16680-52