Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Note: Color of bolt may vary.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number 7-5. This is the 3/8ths inch size brake mounting bolt for 12 inch brake assemblies. Now this brake mounting bolt is used to attach a brake assembly to your trailer. The size on this is a 3/8ths inch by 24. 3/8ths inch meaning the diameter of the bolt size right here. 24 means 24 threads per inch. Now this is a grade 5.
If you see the markings on it, there's 3 marks. That means it's a grade 5 bolt. A few measurements on this. If we do the overall length from the very top to the end, it'll be right at 1 and a quarter inches. The threaded portion is right at 1 inch. Now the head size on this, I pulled the socket that it's made to fit.
It's using a 9/16ths size socket to fit the head, which you use to tighten it down or take it off. This is also to be used with two separate products that you'll need when you install your brake assembly. One would be the lock washer. We do sell that separately. It's listed on the product page of this bolt as a related product and that's part number 38LW.
The other one would be the nut, which is part number 38N. This is the 3/8ths inch size nut and this will also be listed on the products page as a related product. This would all be used to put your brake assembly onto your trailer and just to give you an idea, the size on the nut would also be the socket size of 9/16ths. That should do it for the review on part number 7-5. This is the 3/8ths inch size brake mounting bolt for the 12 inch brake assemblies.
Average Customer Rating: 4.8 out of 5 stars (39 Customer Reviews)
The axles that I ordered last year are still working out great. But even better than the parts was the service I got from etrailer. It was so great working with a company who took the time to listen to my project and help me get the right parts I needed, especially coming right off the heels of a terrible experience dealing with bad information and wrong parts from a competitor. Even with some damages in shipping, the returns/ and replacements were no hassle, with most issues being quickly resolved and not even costing me any additional downtime. As a contractor keeping a small fleet rolling, your competency and professionalism have made me a customer for life!! You guys at etrailer will be my first stop for trailer parts.
Nuts and bolts are nuts and bolts but I can report that the self-adjusting brakes have worked well on our two-thousand mile trip this summer through the mountains of Utah, Idaho, Nevada, Oregon and Washington. They stop straight and true and don't seem to fade on those long down grades like the infamous "Cabbage Hill" near Pendelton Or.
Replacing the brakes on a 50 year old FAN camper. After being assured that it had 10 inch brakes by another company"s "expert" because it has a 3500# axle, I finally received the correct 12 inch brakes from eTrailer. They arrived very quickly, and packaged well. The installation went almost as easy as the very helpful online video showed. Only difference was I had to slightly tighten the brakes to slide the hub over them, even though they are self-adjusting once in service. I have never owned or worked on a trailer before, and the installation was relatively easy. Thank you to George J for the followup email within 24 hours of delivery.
Just received my order of new backing plate assemblies and some misc small parts. Ordered on line late Sunday night, confirmed I had ordered the right parts Monday morning before shipment went out. Customer service by phone was superb and the gal I talked with was perfect. Shipment was on my porch Friday afternoon. I did open box and inspect shipment that arrived completely intact/good shape and all looked good at this point. Not sure when will get to the brakes on the trailer but will post again when the job is done. So far nothing but good to say about Etrailer.com. Regards, John.
The electric trailer brakes arrive within three days of ordering. The parts were a perfect fit. Etrailer' support is second to none! Helpful videos and live support available. The four trailer brakes were $100.00 less expensive than the nearest competitor and free shipping too!
Bought these bolts just in case and was glad I did. Turns out, my backing plates had fixed studs rather than bolts, but having these on hand made reassembly a snap. Threads matched the nuts perfectly. Highly recommend.
Bought brake replacement kit for 20 ft gooseneck trailer, exact fit
The whole order was perfect. I'm rebuilding the running gear on a1976 3 horse slant then remodeling the whole trailer by converting the trailer into a communications trailer for HF radio for disaster response. Front area will be living quarters. I am in our State Guard as a radio operator and also in county emergency management. This trailer will be my shelter and operating station when deployed to hurricanes and such. Since I'm spending my own funds on this, the good prices on etrailer are greatly appreciated.
Carla M. worked with me to make sure we had all the right parts for my boat trailer. I am quite happy with her help.
The parts have worked out very well and have not had any problems. Thanks again for the parts and good service.
great products with very reasonable prices, quick shipping and excellent service follow-up
Could not be more pleased. My set of fully assembled brakes arrived earlier than expected and were as described. The prices at Etrailer were the lowest found while shopping for the brake assemblies. Great job Etrailer!
bought a brake assembly that needed fastening to the axle; these nuts, bolts and washers were just what I needed. Thanks George J.
Hardware for my new brakes, word to the wise...get them when replacing your brakes...your trailer and patience will love you for it.
Ordered lots of parts on Monday, received most of them by Thursday. The received parts were well packaged and undamaged. A few of the parts they didn't have in stock so they had those drop-shipped to me which should be delivered in the next couple of days.
No supplier I have ordered any parts from has such a great technical reference web site or personal customer support. Yea, Rebecca - Well Done! Yes, I'm very happy with the pricing.
Thanks for your great support and I look forward to doing business with them again. More info to follow as soon as I can get the parts installed on my trailer.
It was difficult to find the proper equipment for my particular vehicle. E. Trailer was a life saver and the service was super. My service rep., Nicki K. went "out of her way" to help me. Couldn't ask for more than that!
Excellent, fine thread, grade 5 bolts...I torqued to 40 ft-lbs.
I have had no problems
Great service. Etrailer does an excellent job of filling the orders and getting them sent. Shery was really good handling our order. Thanks again.
Happy with the bolts and good price.
Doug G.
5/21/2015
bolts was fine.
Just as described, arrived promptly as always from etrailer.
All parts ordered were of excellent quality, Thanks!
RESOLD PRODUCT DID NOT HEAR BACK FROM C USTOEMR
These bolts worked great for me!
A bolt
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Millard J.
12/11/2017
Sorry it took so long to answer but have been real busy. My daughter is very happy with the parts that we have gotten from you and things are still good. Thank you for asking,