12-1/4" x 2-1/2" Driver's-side electric trailer brake assembly fits 7,200-lb axles. Mounting flange has 4-bolt pattern. Fits 15" or larger wheels.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today I'm going to take a look at the Dexter, 12 1/4 inch, left hand driver side, electric brake assembly, for 7200 pound axle. Now, these are electric brakes, they're a lot easier to install. They offer more user control than hydraulic brakes. Basically, they require only an electric brake controller, which we do sell separately on our website. There's no actuator or hydraulic lines necessary. Now, these are a manual adjustment brake. In other words, your gear down here is what you would adjust in or out.
Now, manual adjustment brakes do require a periodic manual adjustment. This will include the left hand driver side brake assembly. Now, the mounting bolts and the hardware we do sell separately on our website. Dimension on this assembly is 12 1/4 inch diameter by 2 1/2 inch wide, and those measurements, the diameter would be measured from this shoe all the way over to this shoe. If we put a ruler on it, there's your 12 1/4 inch diameter, and the 2 /12 inches wide would be the width of the brake pad on the shoe. If we put out ruler on it, there's your 2 1/2 inch wide. There's usually brake mounting plans or bolt pattern of 4 bolts.
You can see the 4 bolt holes right there. It does require the use of a 12 1/4 inch brake drum. The wheel size used on these brakes are 15 inches or larger, and again, the axle rating for these that they fit on is a 7200 pound axle. Now, these are electric brakes, so they do have 2 wires right here that need to be connected. One goes to the brake feed, the other goes to the clean ground, and they're both 2 red wires, so either wire can be used for either function. This is a left hand driver side, and the easiest way to tell that now, on a new assembly, of course, there'll be a sticker that you can see. But, if that didn't have the sticker on it, just look at the length of the pad on the brake shoe.
You can see this pad goes from here all the way to here. This one is just from here to here. This is the shorter pad. The shorter pad is always the primary shoe, which means that faces the front of the trailer. That means this is the left hand driver side brake assembly.
That should do it for the review on the Dexter, 12 1/4 inch, left hand driver side, electric brake assembly, for 7200 pound axle.
Average Customer Rating: 4.9 out of 5 stars (8 Customer Reviews)
12-1/4" x 2-1/2" Driver's-side electric trailer brake assembly fits 7,200-lb axles. Mounting flange has 4-bolt pattern. Fits 15" or larger wheels.5 STARS!! Great price, and fast service, also had the parts I needed when I couldn't find them anywhere else.
Product was well described , exactly what I ordered, great catalog.
Easy to install.
Will be my first choice next time.
GREAT PRICE & SERVICE.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.