Accessories and Parts   x   >    Redline   x   >  

Brake shoes fit Dexter Nev-R-Adjust electric brakes that are 10" x 2-1/4" and have an axle rating of 3,500 lbs. Includes lining for right-hand brake assembly only.

Replacement Wheel Cylinder Assembly Uni-Servo for Dexter 7" x 1-3/4" right handed hydraulic brake assemblies

Brake shoes fit Dexter Nev-R-Adjust electric brakes that are 10" x 2-1/4" and have an axle rating of 3,500 lbs. Includes lining for left-hand brake assembly only.

Trailer wheel lug nut fits 1/2" diameter wheel bolts and is chrome plated for durability and corrosion resistance.

Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts.

Use this hardware kit to mount (2) 12" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers.

Replace the spindle nut and retaining washer on your EZ-Lube axle with 1" spindle with 14 threads per inch pitch. Includes 2 spindle nuts and retaining washers.

Machined steel trailer wheel lug nut, fine threads, 60-degree cone. Fits 1/2" wheel bolts.

Step Wet Bolt for 1-3/4" Double Eye Springs

Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers.

Replacement Trailer Hub Drive-In Wheel Studs

Oval style magnet kit with yellow wire allows you to replace only the worn out magnet on your Dexter trailer brakes, rather than the entire assembly. Oval design increases the efficiency of the magnet while also extending the life of the magnet.

Brake installation hardware kit for 7" and 10" brake assemblies with pre-installed mounting bolts. Includes 4 nuts and 4 lock washers.

Torx flathead screws make securing a wood floor to your trailer quick, easy and economical with a 1/4" diameter and type F points for heavy-gauge sheet metal. Specially designed for use on Alkaline Copper Quaternary wood.

These hot-dipped, galvanized steel brackets are specifically designed to make it easier to mount fender PF775X21W. The brackets bolt to the fender and to the trailer with user-supplied hardware.

This self-adhesive weatherstrip tape seals doors, windows and other openings, stopping drafts and water leaks. It will help to keep your trailer interior comfortable and lower your energy costs. Cuts easily. Comes on 50' roll.

These hot-dipped, galvanized steel brackets are specifically designed to make it easier to mount fender PF11X35W. The brackets bolt to the fender and to the trailer with user-supplied hardware.

Replacement nut is designed for use with Dexter Nev-R-Lube hub and drum assemblies. Includes 1 spindle nut.