Mounting Bolts and Hardware for 10" Brake Assemblies
(79 reviews)
Price: $27.04
In Stock
Mounting Bolts and Hardware for 10" Brake Assemblies
Item # BRKH10A
Our Price: $27.04
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (79)
- Q & A (0)
- Videos (3)
- Photos
Redline Accessories and Parts - BRKH10A
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- Bolts
- Redline
- 10 Inch
Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers.
Features:
- Allows you to install 2 trailer brake assemblies
- Fits 10" brake assemblies without pre-installed mounting bolts
- Works with electric or hydraulic brakes
- Includes:
- 8 Mounting Bolts
- 8 Nuts
- 8 Lockwashers
7-75 Brake Mounting Bolt for 7" and 10" Brake Assemblies
6-17 Nut for Brake Mounting Bolt
5-8 Lockwasher for Brake Mounting Bolt
Video of Mounting Bolts and Hardware for 10" Brake Assemblies
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Brake Assembly Mounting Hardware Installation
Hey everybody, Ryan here at etrailer. Today we're gonna be checking out the Redline mounting hardware for brake assemblies. One thing that you always seem to forget at least I do whenever you're doing trailer repair or trailer upgrades for that matter is the small things, right Like the nuts and bolts and small connectors and clamps and things of that nature. And a lot of times, you know when you're making those improvements you know you can break the bolts and break hardware and stuff too. And that's where a replacement bolt kit is gonna come into play. You know, so these are gonna allow you to mount up your drum assemblies or even your disc brake assembly brackets to the flange on your axle.
So these are gonna be seven sixteenths in diameter and these are designed to work with those seven and 10 inch assemblies. They might work with others too if that's what size hole you have in your flange air and pretty straightforward, you know what I mean It's just one of those things like today we're actually adding disc brakes to our trailer, right And so there was no existing hardware. It's like we took a drum brake assembly off and we're able to reuse those bolts. So we get in here and go, well, we forgot about it. So we got the kit and makes it a little bit easier even if you had an existing drum brake set up on here.
A lot of times, like I said it's just always, it never fails, you know especially if your trailer's super old and beat up it's almost better just to get new nuts and bolts. That way you're not fighting with it cause you know you know that's how it'll go. You'll try to save them and then something will happen and then having to take a trip to the store whatever the case may be. But pretty straightforward, you know, you got your bolt you're matching split lock washer and your hex nut there. And so these come in a few different, a few different varieties.
You know, there's a package for just one side of the axle so you get total of four or there's a whole pack that's for the whole axle or both sides of the axle. So you be able to do each side and you can buy 'em individually if you need to or buy multiples if you're doing a tandem axle trailer or something like that. So regardless on your current setup or what you need there's gonna be a solution for you. Once your bolts are all put in place though you wanna make sure to come back and properly torque 'em down using a torque wrench. And that'll finish up our look at of the Redline mounting hardware for our brake assemblies..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Arrived Damaged
- Alternate product found
- Wrong item was ordered
Customer Reviews
Mounting Bolts and Hardware for 10" Brake Assemblies - BRKH10A
Average Customer Rating: 4.6 out of 5 stars (79 Customer Reviews)
Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers.by: Brian05/19/2023
The hardware I received was a mixture of 1/2 inch bolts and 7/16 washers and nuts. I figured the 1/2 inch size was the way to go since the brackets were drilled for 1/2 inch. A trip to the hardware store and an hour of my time took care of the washer and nut problem. So now I have 8 7/16 lock washers and 8 7/16 fine thread nuts that I have no use for.
I soon realized that the mounting brackets on my new axles were pre-drilled for 7/16 hardware. So I drilled the brackets out to 1/2 inch to accept the bolts. Then,upon mounting of the supplied caliper brackets, I found that there was insufficient clearance for some of the washers/nuts to fit onto the bolts, so I had to go to undersized hardware. What a cluster!!
by: Joseph 08/27/2023
I definitely recommend a trailer for all parts regarding your marine boat trailer.
by: Terry07/13/2023
Didn’t put in lock washers with nuts and bolts.
by: Jim02/16/2023
Boat trailer brakes arrived on schedule and were in excellent condition. They fit perfectly and appeared to be of excellent quality. Very happy with the service and quality of the product.
by: Douglas07/06/2023
great service and great products and great advice
by: Brian05/21/2023
only needed the nuts
by: James 11/04/2021
As described. Being pre assembled made installation easy.
James
11/6/2022
Easy to install. They are working fine.
by: Brian05/17/2020
The plating seemed to be top quality and the nut to bolt fitment was superb. The best thing is, they came right to my door. I didn't have to go to the hardware store to dig through the bin of nuts and bolts and possibly break a nail. Very convenient and safe.
Brian
5/18/2021
The products were great and worked exactly as specified.
by: Carlos10/24/2017
Regular every day nuts bolts and washers. Packaged right and delivered timely. That being said, the application I purchased them for was not a 100% fit. The electric brake backing plates came with the bolts already pressed in. The bolts in this kit are hex head and I don't think they would press in and clearance could be an issue. I have not done my install yet so can't say for sure. I will use the lock washers and the nuts.
by: Dan04/12/2019
I only needed wheel cylinders for my 25 year old boat trailer but the value in replacing the whole backing plate was great. Perfect fit with no modifications necessary. They bolted right on and the brake lines matched up like they were original. Thanks for reviving my trailer.
by: Rick02/04/2020
Ordered these self adjusting Brakes to replace the manually adjusted front pair for a trial. The brakes were easy to install, and have worked well. I will buy another set to replace the rear set. Conclusion a nice easy upgrade anyone can accomplish. I would recommend this product.
by: Bill07/07/2020
It was easy to select the trailer brake kit. The dimensions were right there so I could measure what I needed and order. Glad I read the reviews that said to purchase replacement hardware too. Quick delivery And I am all set
by: Micheal05/26/2022
I only needed the nuts and lock washers, but they worked perfectly.
by: Jonathan D06/14/2020
My old hardware for my brackets was completely rusted and bolts were rounded off and hard to be cut/drilled out. This was a perfect replacement
by: Mj04/15/2019
All bolts, nuts and lock washers were present and accounted for. Grade five, nothing special but handy to have them delivered with the brake package and save a trip to town.
by: Ronald W09/15/2017
Was very pleased with the purchase. The only small negative on my order was the adjustment assembly was missing on the right side brake assembly. The good point was a new one was shipped and received within 2 days. To me that was very impressive. Good job by customer service department.
by: Alvaro04/18/2018
Very pleased with the knowledge,assistance and guidance Kevin provided me with my purchase. Items shipped the same day and arrived in 6 days. Trailer break items were all the proper size and fitted perfectly. Job well done, thanks a million.
by: Marc B06/20/2018
Product arrived in excellent condition and clean. I was eligible for free shipping. Order was placed on sunday afternoon and received north of NY state on next friday. I would definitely consider buying from etrailer again.
by: Glenn 06/24/2020
Don't know if I will need these yet, but I was glad to be able to get these at the same time I purchased the brake assembly.
by: John 08/22/2022
Package was delivered 3 days before estimated date
by: Jeff R.08/28/2019
Brake assy. for my boat trailer fit perfect.Fast delivery and great customer service.
by: Joe05/03/2019
What can you say about nuts and bolts except that they fit and arrived on time. Thank you.
by: Dennis01/12/2022
Make sure that these will fit. The bolts were too big for the holes on my axle. My fault. Looks like good quality.
by: Edward A05/11/2021
Be sure to order these to mount new electric or disc back plates. Four needed per wheel, 8 per axle.
by: Kenneth06/23/2020
This was just part of my disc brake order. My whole order came in 2 days. Paid extra for 3 day delivery. No problems with my order. As always etrailer is A1.
25
79
Show More Reviews
See what our Experts say about this Redline Accessories and Parts
- Torque Spec to Use When Installing Mounting Bolts and Hardware # BRKH10AThe Mounting Bolts and Hardware # BRKH10A that you referenced are designed to be torqued 45 to 50 ft lbs of torque since they are designed to fit 10 inch brake assemblies.
view full answer... - Replacement Brake Assembly Hardware for 10 inch or 12 inch Brake AssembliesWithout knowing what size brake assemblies you have we have the part # BRKH12 which fits 12 inch brake assemblies and the part # BRKH10A which fits 10 inch brake assemblies. If you have something different let me know and I'll see what we have that fits.
view full answer... - Bolt Kit Recommendation for Attaching Trailer BrakesSounds like you are looking for a mounting bolt kit for your trailer brakes. For that we have the Mounting Bolts and Hardware for 10" Brake Assemblies # BRKH10A. This is for assemblies that attach with 4 bolts. If instead you have 5 bolts you'd want the part # BRKH12.
view full answer... - Center Hole Diameter & Brake Line Fitting For Demco Hydraulic Brake Kit 40716-15The center of the backing plate has a 2-3/8 inch diameter hole, and the brake line fitting is a 3/16" inverted flare for the Demco hydraulic brakes you asked about, which are the following part: - Demco Hydraulic Brake Kit - Free Backing - Galvanized # 40716-15 These brakes are rated for up to 3,500 lbs and the only other thing you will need with them is the mounting hardware, which is the Mounting Bolts and Hardware for 10" Brake Assemblies # BRKH10A.
view full answer... - Hose Fitting Needed For Demco Hydraulic Brake Kit # 40716-15The Demco Hydraulic Brake Kit # 40716-15 uses a 3/16" Inverted Flare fitting to connect to the brake lines. If you need new mounting hardware for your brakes you can use the Redline Kit for 10" Brake Assemblies # BRKH10A .
view full answer... - Other Parts Needed to Install Titan Disc Brake Kit # T4843300The Titan Disc Brake Kit # T4843300 that you referenced basically comes with everything needed to install it except for hardware to attach the caliper bracket to the brake mounting flange. For that you'd basically just need the Mounting Bolts and Hardware kit part # BRKH10A and you'd be set.
view full answer... - Grade of Bolt for 10" Brake Mounting Hardware KitThe Mounting Bolt # 7-75 that comes with the Kit # BRKH10A for 10" brake assemblies is a grade 5 bolt.
view full answer... - Is TruRyde Electric Trailer Brake Kit For 3,500 lb Axles Correct For 2017 Winnebago Minnie 2500RLYou do have the correct electric brakes for your 2017 Winnebago Minnie 2500RL with the TruRyde Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand - 3,500 lbs # TRU36FR. The magnet would be an issue if you see their windings beginning to show through the friction surface of the magnet, but in general if the brakes are still functioning then the magnet is fine. The # TRU36FR come with magnets so you wouldn't have to replace those separately; the only other thing you...
view full answer... - Hydraulic Drum Brakes for 3,750 lb Axle For 15 Inch WheelsThe Titan Hydraulic Brake Kit - Free Backing # T4071600-500 will fit so long as your drum is 10" diameter x 2-1/4" wide, and you have a 4-bolt brake mounting flange. This is a pretty common set up so it will likely fit but you'll want to make sure, and these brakes will also work with either a 14 inch or 15 inch wheel like you have. These brakes are for a 3,750 lb axle and would only require Mounting Hardware # BRKH10A. I have added a link to a video review for you to check out as well...
view full answer... - How to Determine if Dexter Brakes T1878800-700 FitI can tell you how to determine if the Dexter Hydraulic Brake Kit # T1878800-700 fit your trailer, but we have no way of knowing fits for any one trailer. You'll need to measure the inside of your drum and it needs to be 10" diameter and at least 2-1/4" wide; you need to have a brake flange with four mounting holes, and your wheels need to be 14" or 15". If you meet those requirements you can use the # T1878800-700; you'll also need Mounting Hardware # BRKH10A.
view full answer... - What Size Brake Mounting Flange Bolt Do I Need for a Car Hauler TrailerThe correct size nuts for the brake mounting flange bolts you have on your trailer is going to depend on which bolts you have. There is not really a standard thread pitch for braking assemblies so it will be best to replace the nuts and bolts with part # BRKH10A which contain 7/16"-20 x 1-1/4" bolts/nuts and lock washers. There is also a tool that you can find at most local hardware stores that will tell you the diameter and thread pitch of your bolt.
view full answer... - Mounting Hardware for Installing Titan 10" Disc Brake Kit on Timbren Axle-Less Suspension System To attach the brake flanges and hub assemblies for the Titan Disc Brake Kit # T4843800 to your Timbren Axle-Less Suspension System like # ASR3500S05, you can use the Mounting Bolts and Hardware # BRKH10A. This kit includes the needed mounting bolts, nuts, and lockwashers for mounting two brake assemblies. I have attached an install video below that you might also find helpful.
view full answer... - Determining Which Brakes Fit 10" x 2-1/2" Drums On Boat TrailerBased on the information you provided either the Titan Hydraulic Brake Kit - Free Backing - 10" - Left and Right Hand Assemblies - 3,750 lbs # T4071600-500 or # T4423500-400 will fit your drums. The only difference between these two brakes is the # T4071600-500 are made of standard metal where the # T4423500-400 have a Galphorite coating giving it superior corrosion resistance. Since you are putting these brakes on a boat trailer I recommend the # T4423500-400 as they will be less likely...
view full answer... - Determining Which Braking Assemblies Fit 2016 Crossroads Sunset Trail Super Lite 15 250RBThe correct braking assemblies for your 2016 Crossroads Sunset Trail Super Lite 15 250RB are going to be dependent on the size of your drums. Since your trailer has a GVWR of 7582 and tandem axles it more than likely uses 10" brake assemblies which are the Dexter # 23-468-469 or the etrailer # AKEBRK-35-SA. You can confirm this by measuring the diameter and depth of your drums following the included diagram. Neither kit comes with new mounting hardware so if your current hardware is in...
view full answer...
- Replacement Parts For Surge Drum Brake ActuatorI will be able to help you with the parts you need based on your axle capacity. Your axles are rated at 3,200 lbs. You will need the following items for your surge brakes. You have a hydraulic brake actuator. If you are using a 2" ball with your boat trailer, you can replace your existing actuator with the Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 8,000 lbs, part # DM8609101. While it is rated for 8,000 lbs, if your trailer is only rated for 4,000 lbs, you must adhere to...
view full answer... - Replacement Drum Brakes For A 89 Tandem Car HaulerThe axle part numbers are generally placed on a sticker located at the center point of the axle shaft. The part # 8-247 stamped into the hubs tell me that you have a 3,500 lb axle. To replace the drum brakes on your 3,500 lb Dexter axle you will have a few options. The two options entail the use of self-adjusting or manual brakes. The self-adjusting brakes will move the adjuster screw outward as the pads wear down to ensure optimal wearing and performance of the trailer's brakes, whereas...
view full answer... - Size of Hub/Drum Compatible with Titan Uni-Servo Hydraulic Brake Kit T1878800-700 The Titan Uni-Servo Hydraulic Brake Kit # T1878800-700 consists of a left and right pair of brake assemblies that fit with 10 x 2-1/4-inch hub/drums like # T1543900CB042. Please refer to the linked photo to see how a drum is measured. To mount the brakes on your 4-bolt brake flanges you can use hardware kit # BRKH10A; this kit allows installation of a pair of 10-inch brakes.
view full answer...
- Can Single Axle Trailer Be Converted To Tandem Axles With Two Timbren Axle-Less ASR1THDS03?Yes you can use two of the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Off-Road Tires - 2.2K # ASR1THDS03 you were looking at to lift your 6' x 12' enclosed Carry-On trailer to add larger tires. If the GVWR of your trailer is over 3500lbs you will need to add trailer brakes, as most of the country requires them at that weight. For trailer brake assemblies you would need two of the Electric Trailer Brake Kit # AKEBRK-35-SA, two of the mounting hardware # BRKH10A,...
view full answer... - Replacement Disc Brakes For a DHM Boat Trailer With 2,860LB Axle Rating and 14" Diameter WheelsBased on the information you provided you most likely have a 10" disc brake kit like the Kodiak # KOD59FR. The only way to verify exactly what you have or will need to replace them is by contacting the trailer manufacturer with your VIN information or by disassembling one of your hubs to measure and verify the correct parts and sizes. This Kodiak attaches to a Mounting Flange # 4-35 with the bolt holes spread 2-7/8" vertically and horizontally. You will also need to check the spindle. The...
view full answer...
- Recommended Replacement Drum Brakes for Boat Trailer with 3500-lbs Axles I recommend using the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs # AKFBBRK-35-D, which will work with your current setup and are perfect because the Dacromet plating is designed to withstand exposure to water; so they're ideal for boat trailers. These brakes are free backing, so they'll allow your trailer to backup regardless of whether or not you've got a lockout feature on your actuator, and they'll work with a breakaway kit. If you've...
view full answer... - Parts Needed To Add Electric Trailer Brakes To Rockwell American 3500lb Axle On 5 x 10 Tear CamperThe Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA you were looking at are designed specifically for 3500lb trailer axles like your 60" Rockwell American Axle, but you will need to make sure that a brake mounting flange is installed on the axle. The brake mounting flange is located right behind the idler hub/drum and will have 4 bolts as shown in the included picture. If your axle does not have brake mounting flange you will...
view full answer...
- Replacement Brake Shoes And Wheel Cylinders For Mastercraft Boat TrailerFor your Mastercraft Boat Trailer, I recommend the Titan Hydraulic Brake Kit - Free Backing - Galphorite - 10" - Left/Right Hand - 3,750 lbs # T4423500-400. The complete assembly is often less expensive than replacing the individual components. If you want just the components you mentioned, I recommend the 10" X 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel) # BP04-120 and the Wheel Cylinder - 10" and 12" Single Servo RH # BP17-020 in addition to the left hand # BP17-030. You may also...
view full answer... - Recommended Trailer Brake and Drum Assemblies for UFP ReplacementsFor your brake assemblies I recommend the Demco Hydraulic Brake Kit - Free Backing - Galvanized - 10" - Left/Right Hand Assemblies - 3.5K # 40716-15. These assemblies are galvanized to resist corrosion and will not require a reverse lockout for backing your boat trailer. You will also want the Mounting Bolts and Hardware for 10" Brake Assemblies # BRKH10A and the Brake Adjustment Spoon for Drum Brakes # W80630. For the hubs I recommend the Trailer Hub and Drum Assembly - 3,500-lb Axles...
view full answer...
- Brake Upgrade Reccomendation For My UFP DB-42 Oil Bath BrakesWhen it comes to upgrading your UFP DB-42 brakes The Kodiak Disc Brake Kit - 10 inch Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 pounds # K2HR35D will upgrade your braking system. This kit is coated with a Dacromet coating that helps prevents corrosion resistance. This kit does not include The Inner Bearing # L68149, The Outer Bearing # L44649, or The Grease Seal # RG06-050. The races are included. You would also need The Mounting Hardware # BRKH10, and The Kodiak XL ProLube Oil Bath Hub...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Joshua S
Installed by:
Randy B
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Alexander C
Video by:
Zach D
Video by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
5/24/2023
Sometimes having the extra hardware on hand will work out in the long run. We do have the mounting nuts separately as part # 6-17.