Use this hardware kit to mount (2) 12-1/4" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers. For axles with 10,000 lbs to 15,000 lbs capacity.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the Dexter mounting bolts and hardware for 12 and a quarter inch brake assemblies for 10,000 to 15,000 pounds, part number BRKH122510.Now since our hardware holding our brake assembly on is pretty worn and rusted, you can see that it's covered in rust and half the threads are rolled over, it's really not going to be safe to use those. So we're going to be replacing it with a new hardware kit.So we can just line up the holes on a backing plate and on the axle, and we're going to put our bolts in place, and then we can get the rest of the hardware in.One thing to keep in mind is you want to watch your wires and make sure they're out of the way and they don't get pinched in between the backing plate and the brake assembly.Now just like what came off, we're going to be putting on a lock washer, and then a hex nut to hold the bolts in place. We're just going to get all these on there hand tight so we don't have to worry about the assembly shifting or falling down.With our wire connections made, we can come back and tighten up our seven bolts holding our assembly onto the axle. Again, I'm going to be using a 5/8ths socket to hold the head of the bolt and an 11/16ths wrench to hold the nut on the back side.Just going to go around and snug them all up before I tighten them all the way.And that'll finish up your look at the Dexter mounting bolts and hardware for 12 and a quarter inch brake assemblies for 10,000 to 15,000 pound axles, part number BRKH122510.
Average Customer Rating: 4.8 out of 5 stars (31 Customer Reviews)
Use this hardware kit to mount (2) 12-1/4" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers. For axles with 10,000 lbs to 15,000 lbs capacity.just right
Great fit , easy to install. Sending before and after pictures
Brake assmblies are the way to go when replacing trailer brakes. Definitely the most economical way to 'do it right'. So easy to install and everything is new.
perfect for the job delivered fast
Awesome. New bolts are always a good id ea
Good product
Perfect fit and came a day early
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.