Brakes for 12" x 2" Drums and 4-bolt Mounting Pattern
Question:
my axle has only 4 hoes my drum is a 12-2 need brakes to fit
asked by: Paul J
Expert Reply:
We only have one electric brake assembly that may work for you, the Dexter Electric Brake Kit # 23-105-106-09. This kit fits standard 5-bolt mounting flanges or AL-KO/Hayes 4-bolt flanges. If you have that type of 4-bolt flange you would likely know it because the pattern is offset, with the upper mounting bolt holes spaced further apart than the lower holes.
These brakes are rated for 6,000 lbs and would require Brake Mounting Bolts # 7-5, Nut # 38N and Lock Washer for Brake Mounting Bolts # 38LW for mounting the brakes. I have included a picture of the measurements for the 4-bolt pattern so you can measure yours to be sure that it will fit.
(click to enlarge)
Products Referenced in This Question
Lock Washer for Brake Mounting Bolt for 12" Brake Assemblies - 3/8" Diameter
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Washers
- ABS Fasteners
more information >
Replacement Nut for Trailer Suspension U-Bolts or 12" Brake Assemblies - 3/8" Diameter
- Accessories and Parts
- Trailer Suspension Parts
- Hardware
- 3/8 Inch Diameter
- Nuts
- Suspension Nut
- ABS Fasteners
more information >
Brake Mounting Bolt for 12" Brake Assembly
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Center Hole Diameter of Brake Assembly 23-106-09
- Q&A: Will 12" Dexter Electric Brakes w/4 and 5 Bolt Pattern # 23-105-106-09 Fit in Place of Hayes Brakes
- Q&A: Recommended Brake Assembly 12x2 with 4 Bolt Mounting Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What Is The Dimensions Of The 4 Bolt Mounting Holes On The Dexter Electric Brakes 23-105-106-09?
- Q&A: Availability Of 12" Replacement Brakes For Kelsey Hayes 4-Bolt Pattern With 3-1/2" Center Hole
- Q&A: Left and Right Replacement Brake Assemblies For AXLETEK-12-GG Electric Trailer Brakes
- Q&A: 1985 Hale Horse Trailer Brakes 12 x 2, 4-hole
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Article: How to Measure a Trailer Axle