Recommended Tekonsha Brake Controller Adapter for a 2009 Toyota Tundra w/ the Factory Tow Package
Updated 11/13/2025 | Published 10/22/2025
Products Featured in This Question
Question:
I was reviewing some videos to determine how to install the TK26BR. I have a 2009 Toyota Tundra with a tow package. Looking at what I received, I do not have an adapter harness. Is there an adapter harness available? ?Did I order the correct item? Thank you for your help
asked by: Scott R
Expert Reply:
Hey Scott. Since your 2009 Toyota Tundra has the factory tow package, you can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # 3040-P to install the Voyager iD Brake Controller item # TK26BR. The white factory plug you're looking for will be located above and to the left of the emergency brake pedal, above the toe kick. I've attached a picture below to help you find it. If your truck did not come from the factory with a 7-way connector you will not have this plug.
The harness included with the Voyager iD item # TK26BR is a universal harness. It will work but you'll need to splice into some of your factory wires to get it setup.
(click to enlarge)
Product Page this Question was Asked From
Tekonsha Voyager iD Brake Controller - Dash Knob - Up to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Splice-In
- Dash-Mounted Knob
- Behind-Dash
- Up to 3 Axles
- LED Display
- Multiple Trailers
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Brake Controller Recommendation for 2025 Sprinter 4500 Mercedes
- Q&A: Which Wireless Trailer Brake Controller Is Best
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: 7-Way and 4-Way Trailer Wiring Combination for 2015 Ram ProMaster 1500
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Is There Downside to Going with 7500 Air Lift Kit Over 5000
- Q&A: Parts Needed to Install Tekonsha Voyager ID on 2020 GMC Yukon
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
Jerred H.
11/13/2025
Hey Scott, how did things go getting the Voyager iD brake controller connected on your Tundra? Did the plug-in adapter make the setup easier? Your update could help others working with the same tow package.