Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...It sounds like you're looking for a weight distribution hitch for your camper, which we do recommend any time the trailer that you'll be towing weighs more than 50% of the weight of your vehicle. When it comes to choosing a weight…
view full answer...Hey Al, thanks for reaching out. We do offer a wiring harness for the 2026 Toyota Corolla Cross Hybrid S. You will just need to select from the following depending if you have LED taillights or not: - Curt T-Connector Vehicle Wiring Harness with…
view full answer...The Replacement Control Module for Lippert Electric Coach Step #LC301702 has the purple wire that connects to the door light switch. The other end of the switch #LC301694 connects to the Replacement Wiring Harness for Lippert Electric Coach Step…
view full answer...Hey Brandon, thanks for reaching out! The brake controller plug for your 2025 Ram 1500 is under the dash to the right of your steering column, according to the installation instructions for the Curt TriFlex NEXT Trailer Brake Controller w/ Custom…
view full answer...Both of these are reliable brake controllers. Personally I like the freedom that the Curt Echo #C51180 gives you. You can use it on any vehicle with a properly wired 7-way and trailers with up to 2 braking axles. There is no wiring and it can be…
view full answer...To add a 7-way connector to your 2020 Subaru Outback I recommend the #ETBC7L which will plug into your existing 4-way connector and will only require you to make two connections, grounding the white tire to the frame of your vehicle, and running the…
view full answer...If your 2020 Hyundai Elantra is a GT Hatchback, the DrawTite Hitch #24905 will fit as long as it is not one of the models that was mad IN Korea. If your 2020 Hyundai Elantra is a GT Hatchback, but is not an N line model and does not have dual…
view full answer...The B&W Custom Installation Kit w/ Base Rails #BWRVK2602 is compatible with above-bed fifth wheel hitches from Demco, so if by "Ultimate Slider" you were referencing a Demco Hijacker such as #DM8550034 which mounts on above-bed rails…
view full answer...Hey Carl, yes the Curt E16 hitch part #C16115 does work with the Demco rail kit adapter and a Reese Revolution pin box but due to it's loose jaw design it would not be my first choice. Instead I would recommend the Curt A16 part #C16120 which…
view full answer...Hey James! A weight distribution hitch is definitely the best way to reduce that rear sag. It will also cut down on sway for a much improved towing experience. The correct hitch depends on the tongue weight of your setup. As of recently, I'm a…
view full answer...