Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
It sounds like you're asking about the deflection of the 2K Timbren Axle-Less Trailer Suspension #ASR2KHDS04, which Timbren has listed as 1-5/8" in the attached diagram - see the (r) label. If you are talking about something else…
view full answer...Part #PTW2997 works great for charging your breakaway battery when the trailer is not in use. This product is easy to hook up and fairly inexpensive compared to the price of a new battery. I strongly recommend this product. We do not carry any…
view full answer...It sounds like you're looking for the Replacement Quick Level Touch Panel for Lippert Components Level-Up Hydraulic Leveling System #LC74FR which works with the Level-Up system which your one control level up controller 807615 is designed…
view full answer...If you have the 13K Demco Autoslider #DM8550040 that installs on industry standard base rails, like part #RP50087-58, then yes, the Demco Recon #DM8550043 will fit in the 5-1/2' bed of your 2015 Ford F-150. As far as compatibility with the…
view full answer...The Sleeve-Lock A-Frame Trailer Coupler part #CA-5296-B is designed for a standard 50 degree a-frame trailer. If you have an a-frame trailer then this is likely what you have as I would say a good 95% of a-frame trailers use the standard 50 degree…
view full answer...The size of the leaf spring you will want for your 2012 Forest River Salem is the 26" long and the 1-3/4" wide. The weight capacity can vary a little, although you don't want to go below the 3500 lbs. The leaf springs you will want,…
view full answer...Your best solution is to replace all leaf springs at the same time with the exact same spring. This will ensure everything rides as predictably as possible and prevent one axle from hanging lower than the other based on different thickness leaf…
view full answer...I would be happy to help! We do sell spring seats by themselves, and you are correct that with your 2021 Forest River Grey Wolf 26DBH being so new that the U-bolts and U-bolt plates should still be in good enough shape to be reused instead of…
view full answer...Based on my research the Shelby 5107 coupler looks to be an A-frame coupler that accepts a 2" ball, though I was unable to find the weight capacity as this seems to be an older coupler. For a replacement coupler there are a couple different…
view full answer...The Curt Pop-In Ball, part #C60629, has a shank with a diameter of 2-1/4 inches and is 3 inches long. It's designed specifically to fit the factory gooseneck hitches that are an option with newer model Fords, GMs, and Nissans. If this is what you…
view full answer...The horizontal mounting plate that mounts to the frame of your vehicle on the #41947 is 2-13/16" wide and the mounting plates themselves are 11-9/16" tall. The holes on the horizontal mounting plates are 3/4" and 1-1/4" in…
view full answer...For your 2011 Suzuki Grand Vitara and Curt hitch #C13001 you can use any ball mount rated for a Class III, 2 inch trailer hitch. The recommended ball mount for the hitch and vehicle is #D-4 and it measures 8-1/2 inches from the center of the hitch…
view full answer...Filter Your Search
Contact and Help