Result: hitch coupler

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

The correct product to use to support the boards you plan on using to support the bed would be the E-Track Wood Beam Socket #59149. Since you will want to have the 2 by 4s on edge to support the plywood, and the only way the #59149 could be installed…

So you have added a 7-Way trailer connector to your truck and now you want to add one to the trailer. There are a couple of options that you could employ. First, you could just use a 7-Way trailer connector only such as #PK12706, no wiring, and…

Yes, there is a difference in hitches for an 8' bed on your 2022 Chevrolet Silverado like the B&W Companion #BWRVK3710, which is a fixed hitch. Fixed hitches are used primarily on long bed trucks, and sliding hitches like the Demco Hijacker…

B and W would be the best source for the fit of their hitches and I would agree with them that the fixed B and W Companion part #BWRVK3710 would be your best option for your 2023 Chevy Silverado 3500 short bed with the OEM prep package. Our fitguide…

If you have a short bed truck, you'll want to use a sliding hitch unless your 5th wheel has a rotating pin box like the Reese Revolution/Sidewinder or the Lippert Turning Point. For a sliding hitch, I'd recommend the B&W Companion, part…

For the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 2,000 lbs #ASR2KHDS04, I've attached a photo with all the dimensions you were seeking but the basic plate dimensions are 4-3/4 inches by 13 inches…

It sounds like you're asking about the deflection of the 2K Timbren Axle-Less Trailer Suspension #ASR2KHDS04, which Timbren has listed as 1-5/8" in the attached diagram - see the (r) label. If you are talking about something else please let…

The Timbren Axle-Less system would be a great option to replace your current axle on your Coleman pop-up trailer. The Timbren system that I like for your trailer is #ASR2KHDS04. This suspension has a 2000 lbs weight capacity and includes 4 inch lift…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The SumoSprings Solo Custom Helper Springs part #SS45FR do a great job of absorbing road shock like bouncing and bumps. They could fight the Roadmaster Active Suspension though so I recommend using the lowest setting (thin spacer) on the RAS to start…