Happy to help Joe, thanks for reaching out! From what you're looking to get out of a trailer jack, I'd suggest the Dutton-Lainson Boat Trailer Jack w/ Wheel #D22335. It has a large 8" x 3-5/16" single wheel, 1,500-lb capacity, their…
If you have adjustable brackets for the bunk boards then you could lower them down and mount the CE Smith Roller Bunks for Boat Trailers #CE27710 directly to them. If you don't have adjustable brackets then you would need to remove the bunk…
You could use roller bunks such as #DL21740 on a pontoon boat trailer. If the pontoons sit on carpeted bunks and support the boat then you would need to place rollers the whole length of each of the carpeted bunks. Set #DL21741 is rated higher at…
A couple sets of the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 will drastically help with getting your pontoon boat on and off the trailer smoothly and easily as there isn't any friction…
Hey Joel, you are correct you do not need to install carpet on the bunks if you install the Tie Down Bunk Slicks for Boat Trailer Bunks #TD59FR. What kind of boat do you have?
The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the…
We definitely have a boat winch that is capable of winching your 5,000 lb boat. I recommend the 3,200 lbs Fulton XLT, 2-Speed Trailer Winch part #F142425 which will be more than enough to winch the 5,000 boat trailer as long as you have good rollers…
Hello Paul, thanks for reaching out. Yes, you can add two side cameras to the Furrion Vision S+ camera system. For that you will need part #FR84AD. These cameras have plenty of signal strength, so even for a longer 4-horse living quarters trailer…
Hey Kevin. For a Dexter 89-3 caliper you'll want to use the Dexter Semi-Metallic Disc Brake Pads - 6,000 lbs to 8,000 lbs item #K71-629. This kit includes four brake pads and mounting hardware to replace one axle's brake pads. If you have any…
I looked up the information on your TDE 46205 Hubs and found a couple of great replacements for you. The one you pick will depend on the number of wheel studs you have. For 5 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z…
If your propane tank covers are Camco covers like the part #CAM40564 yes the replacement cover #CAM40566 would work. This isn't a universal cover though.
The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…
Filters
