Dimensions for Timbren Heavy-Duty Axle-Less Trailer Suspension ASR2KHDS04

Question

Question:

I have a Forest River trailer Ultra lite with a GVW of 6000 lbs. and am looking to replace the torsion axles with these ASR2KHDS04. Can you tell me the timbren axle plate dimensions length and width of unit so I can have the additional mounting plates made up since the frame is only 2inch wide. Thanks

asked by: Carl R

0

Expert Reply:

For the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 2,000 lbs # ASR2KHDS04, I've attached a photo with all the dimensions you were seeking but the basic plate dimensions are 4-3/4 inches by 13 inches for the base plate.

expert reply by: Jason S

0

click to enlarge

Answer 1

Nothing at all. The Grease Seal item #58846 is a different part number for the 10-19 grease seal. It has a inner diameter of 1.719" and outer diameter of 2.565". This seal is primarily used in 3,500 lbs axles. What kind of trailer do you…

view full answer...

Answer 2

There are some options for you to raise your 2005 Copper Canyon, the first of which is to replace your current hangers with taller ones, though they may not give you a great amount of lift. There is also the possibility of a lift kit, though only if…

view full answer...

Answer 3

It sounds like you're asking about the deflection of the 2K Timbren Axle-Less Trailer Suspension #ASR2KHDS04, which Timbren has listed as 1-5/8" in the attached diagram - see the (r) label. If you are talking about something else please let…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Dimensions for Timbren Heavy-Duty Axle-Less Trailer Suspension ASR2KHDS04

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching