This roller assembly attaches to your 2" wide trailer tongue and supports your boat's keel for easy loading and safe transport on your trailer. It features galvanized steel brackets and a 4", non-marking, TPR spool roller.
Features:
Specs:
These mounting brackets sandwich around the trailer's tongue and attach with included 3/8" diameter bolts. Multiple holes in the brackets make it easy to adapt to the different heights of trailer frames and also ensure that the roller will be mounted at the proper position. The 4" thermal-plasticized rubber spool roller helps to support your boat's keel during trailering.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the CE Smith Keel Roller Assembly for a 2" Wide Trailer Tongue. Now this roller assembly simply attaches to your two inch wide trailer tongue and supports your boat's keel for easy loading and safe transport on your trailer. It makes it a lot easier to load and unload your boat. It's also going to help to absorb road shock while the boat is being trailered. The unit's going to feature a sturdy, corrosion resistant style bracket. It's going to let you bolt the roller assembly to the tongue of your trailer, so it kind of sandwiches the tongue of the trailer. Multiple mounting holes are a great design.
They allow you to adjust the position, and accommodate different trailer frames heights. Again, this is designed for a two inches wide trailer tongue or trailer frame, but again, it will accommodate different heights of trailer framing. Mounting hardware is included. It's also going to feature the yellow thermal plasticized rubber roller that delivers superior, long lasting performance. TPR material is non-marking.
It is stronger than rubber and softer and more pliant than polyurethane. The product is made here in the USA. Again, it is designed for a two inch trailer tongue. That's the width. The height is going to be eleven and a half inches. It does offer an offset of one inch.
The diameter of the bolt holes, each one's going to give us a diameter of three-eights of an inch. Then this roller itself is going to measure four inches wide. That's going to do it for today's look at the CE Smith Keel Roller Assembly for a 2" Wide Trailer Tongue.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.