etrailer.com Trailer Hitch Receiver and Coupler Lockset - 2" Trailer Hitch Receiver

Ask the Experts about this etrailer Trailer Coupler Locks

• Trailer Hitch with Best Ground Clearance for 2008 Honda Element EX AWD
  All of the trailer hitches available for your 2008 Honda EX are going to have pretty similar ground clearance measurements but your best option will be with the Draw-Tite Class III # 75659. The 2 inch receiver on this hitch will pretty much sit right up against the bottom of the rear bumper on your Element (see attached image). This Class III hitch will use existing holes in the vehicle's frame for a no-drill installation and it has a 3,500 pound towing weight capacity and a 350 pound...
  view full answer...
• How To Order Stainless Steel Hitch Locks and Coupler Locks to be Keyed Alike
  For stainless steel coupler lock and hitch receiver lock that can be keyed alike, I would recommend the etrailer brand locks. They offer the etrailer Stainless Steel 2 Inch Hitch Receiver Lock, part # e98882, which will fit most 2 inch hitch receivers, and has an inside width of 2-5/8 inches. For coupler locks they offer the etrailer Stainless Steel 7/8 Inch Span Coupler Lock, part # e98890, which has an inside width of 7/8-inch, and the etrailer Stainless Steel 1/2 Inch Span Coupler...
  view full answer...
• Getting Keyed Alike Locksets for Hitch, Coupler and Cable Locks
  Yes, you can get all of the locks you have mentioned keyed alike as long as you order from our Keyed Alike locks page. If you order all the locks you need at the same time they will come keyed alike. If you decide you need another lock keyed the same later you can call our customer service line at 1-800-298-8924 and request a lock, as long as it is on our Keyed Alike locks page, with the same key by giving them the key number you have. When you order please be sure to select keyed alike...
  view full answer...
• Trailer Hitch and Bike Rack Recommendation for a 2006 BMW X5
  I recommend the Draw-Tite Trailer Hitch for the 2006 BMW X5, item # 75492, which has a 6,000 pound towing weight capacity and a 600 pound tongue weight capacity. The highest capacity hitch is always the way to go when possible, for safety and versatility for future needs. At first look the Curt Trailer Hitch for the 2006 BMW X5, item # C13162, seems to be an easier installation but if you review the instructions for each, I believe, you will see that the Draw-Tite model is just as easy...
  view full answer...
• Which Coupler Lock Set is Best for Use with Atwood Trailer Coupler 81911
  The Atwood Trailer Coupler 81911 that you have on your A-frame trailer can be locked in two ways, by securing the latch and by blocking entry of a hitch ball. The latch mechanism on the top can be locked with an item like the Dead Bolt # e98884. (This latch lock is one of the two locks included in part # e99039, which is our reference for the CT Johnson part RHC32.) But please note that this latch lock has a center span of only 1/2-inch; the coupler latch on your # 81911 requires a...
  view full answer...
• Comparing Reese Weight Distribution System With Equal-i-zer Weight Distribution System
  The Reese Steadi-Flex # RP66558 and the Equal-i-zer # EQ37060ET systems are both very good and will work well with your 2011 Ford F-150 and your 17SD Casita trailer. The major differences are in the tilting design of the head, the trunnion bars, and the friction points. The Equal-i-zer system uses the traditional washer stacking design for the head angle, where the Reese system uses a serrated washer design so no additional washers or stacking is needed. The trunnion bars are shaped...
  view full answer...
• Recommended Weight Distribution System For Grand Design Imagine 2950RL Trailer
  For your 2016 Ford F-150, I recommend the Reese Strait-Line Weight Distribution w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW # RP66074. This system has a total tongue weight range of 600-1200 lbs. The total tongue weight is the loaded tongue weight of your trailer along with any cargo behind the rear axle of your truck. The Reese Straight-Line uses hot rolled spring trunnion bars along with cams to keep your trailer straight. This is the only system that actually...
  view full answer...
• Can a High/Low Adapter be Used with a Hitch Extender for Flat Towing
  I do have a solution for you, but using an extender with a high-low adapter would be using 2 adapters and is not advisable. Hitch extenders reduce the weight rating of your hitch by 50% and will also cause more movement not to mention the torque that will be on both adapters when you are making a turn. Instead what you can do is swap out your current hitch mount tow bar, like the Blue Ox Alpha # BX7365 for a coupler mount tow bar like the Blue Ox Acclaim # BX4330. This allows you to...
  view full answer...
• Can Two Different etrailer Lock Products Be Ordered Keyed-Alike
  Yes, you can order multiples of two different etrailer locks, 3 of Hitch Receiver Lock # e98882 and 1 of Hitch Receiver Lock Set # e99039, all keyed alike. To do this you need to select the Keyed Alike option on both product pages along with the appropriate quantities for each part. When your order is processed here at etrailer we will install keyed-alike lock cylinders in all four products.
  view full answer...
• Recommended Weight Distribution System And Suspension Enhancement For 2012 Ram 1500
  For your 2012 Ram 1500, a weight distribution system with sway control will help a great deal. To determine the best system for you, we need to look at the total tongue weight which is the loaded tongue weight of your trailer plus any cargo behind the rear axle of your truck. This total tongue weight will help us find a system that has the actual total tongue weight in the middle of its range for best results. For your application I recommend the Reese Strait-Line Weight Distribution...
  view full answer...
• Can a Bumper Mounted Trailer Hitch be Used to Tow a 5X8 Trailer with a 2005 Chevrolet Colorado
  As long as you stay within the manufacturers tongue weight and gross trailer weight ratings, see bumper and owners manual, you will not have a problem towing with the Curt 2 inch Bumper Hitch, 5,000 lbs GTW, item # E-3S. A better solution for your towing needs would be the Draw-Tite Class III Trailer Hitch, item # 75607, which is designed specifically for your 2005 Colorado. This is a no drill installation and all of the mounting hardware is included. Some items you may need to complete...
  view full answer...
• Recommendation for Keyed Alike 2 Inch Hitch Lock, 1-1/4 Inch Hich Lock, and Coupler Lock
  For the locks that you are needing, I recommend going with the etrailer Trailer Hitch Receiver & Coupler Lockset # e99039 that you mentioned. This will give you one 2 inch hitch lock, along with a 4-1/8 inch coupler lock for trigger style couplers. Then, for the 1-1/4 inch hitch locks, I recommend the etrailer Trailer Hitch Receiver Lock # e98879. This chrome 1-1/4 inch receiver lock will come with a quantity of 1, so you will just need to order two. Since these locks are all from...
  view full answer...
• Recommendation For Locks To Prevent Theft Of A Camper Trailer
  If you are wanting to lock the trailer to your 2002 Isuzu Trooper and you have a 2 inch hitch receiver, I would recommend the etrailer Trailer Hitch Receiver And Coupler Lockset, part # e99039. This is a set of locks that will lock the ball mount to your tow vehicles 2 inch hitch and also lock the trailers coupler to the hitch ball. Both of the locks can be keyed alike, so only one key is needed for both locks. Locking your trailer at both connections will add time when somebody is...
  view full answer...
• How Can I Get Three Different Locks Types Keyed Alike?
  In order to complete this process correctly, you will need to place all of the different locks on the same order. They need to be products with the same brand or manufacturer. Under each individual product, choose the "keyed alike" option before adding the product to your cart, all the products in your completed "cart" will be locked and unlocked with the same key. For example, if we use all etrailer products such as the etrailer Trailer Coupler Lock # e98888 and etrailer Trailer Hitch...
  view full answer...
• Will T-One Wiring Harness # 118409 Fit a 2006 Jeep Wrangler Unlimited Rubicon
  You are correct, the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector - Jeep Wrangler, item # 118409, is the correct trailer wiring harness for your 2006 Jeep Wrangler Unlimited Rubicon. This harness will plug inline with your existing wiring harness on both sides of the vehicle. We have a video of this harness being installed on a 2006 Jeep Wrangler for you to review and I have also provided a link to installation instructions for you to review. The Curt Class III Trailer...
  view full answer...
• Availability of Keyed-Alike Hitch and Coupler Lock Sets
  We offer keyed-alike lock sets like the DeadBolt # e99039 that include both a 1/4-inch diameter trigger-style coupler latch lock and a 5/8-inch diameter hitch lock (for 2-inch hitches). This kit can be ordered keyed-alike in whatever quantity you require. Master Lock kit # 1481DAT is not offered keyed alike. Simply select Keyed Alike from the drop down menu tool and indicate your quantity of 4 in the field provided.
  view full answer...
• Can etrailer Coupler Locks # e99039 and # e98892 Both be Keyed Alike
  Yes, if you selected "keyed alike" on both product pages for the etrailer locks part # e99039 and # e98892 the locks that would show up would be keyed alike.
  view full answer...
• Recommended Trailer Hitch and Coupler Lock Set for 2017 Toyota Tundra
  If you have a 2 inch trailer hitch receiver on your 2017 Toyota Tundra, I recommend the etrailer Trailer Hitch Receiver & Coupler Lockset # e99039. This particular kit includes a set of keyed alike locks for both your trailer hitch and coupler. The locks are extremely well built, featuring a double-chrome plating for maximum rust resistance and covered key slots to prevent any corrosion. The hitch lock will fit 2 inch hitch receivers. The inside width of the hitch pin is 2-5/8 inches....
  view full answer...
• Recommended Trailer Coupler Locks Keyed Alike For A Number Of Trailers
  We have the Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers - Key 312 # FA86-0015-312 that you can order in any quantity. They will all have the same key number 312. I've attached a photo with measurements. I've also attached a video of various trailer couplers for you. This will secure the trailer when disconnected from the tow vehicle. If you want trigger couplers and ball mount locks, I recommend the etrailer Trailer Hitch Receiver & Coupler Lockset - 2" Trailer...
  view full answer...
• Recommended Class III Trailer Hitch Receiver For A 1999 Toyota RAV4
  For your 1999 Toyota RAV4, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13524 is a confirmed fit and is a great hitch that is easy to install and has a nice sturdy square tube design. The rated towing capacity of the hitch is far above your vehicle's rated towing capacity as you stated, but you will be much happier with a Class III hitch. The class 1 hitch will greatly reduce your ability to use accessories and will significantly reduce options for even a ball mount....
  view full answer...
• Replacement Lock for Snowbear Trailer Coupler
  The Pin and Clip For Class 3, 4 and 5 Trailer Hitch Receivers, item # PC3, is the pin needed to install a ball mount in a Class 3 or larger 2 inch receiver. I checked out the Snowbear trailer website and saw that the majority of their trailers have a standard 2 inch ball coupler. We have coupler locks that will fit this style of trailer coupler. The Curt Coupler Safety Pin, 1/4 inch, item # K-8P, is a no frills safety pin that will get the job done and if you want a measure of security...
  view full answer...
• Corrosion Resistant Coupler and Receiver Locks to Secure Trailer
  We don't have exactly what you're looking for, but I may have a solution for you. The etrailer Trailer Hitch Receiver & Coupler Lockset # e99039 has both a hitch receiver lock and a coupler lock that are keyed alike. However, they are not stainless steel. They're steel with double-chrome plating to resist rust and corrosion. If stainless steel is more important to you than having them keyed alike, the B&W Trailer Hitch Receiver Lock # BWTS51234 will lock your ball mount to your...
  view full answer...
• Recommended Hitch Lock Set That Can Be Ordered Keyed Alike
  The Master Lock Hitch Receiver and Coupler Latch Lock Set # 2848DAT is not available keyed alike, but we do have a 2-lock option from etrailer that can be keyed alike in multiples, part # e99039. This lock kit consists of a 5/8-inch diameter hitch lock for 2 x 2-inch receivers and a 1/4-inch diameter coupler latch lock. You can order multiple sets of this lock kit that are keyed alike by selecting that option from the menu bar above the add-to-cart button. No individual replacement parts...
  view full answer...
• Exhaust Must be Lowered for Installation of the Curt # 13571 Trailer Hitch on a 2006 Nissan Murano S
  I spoke with the technical department at Curt Manufacturing and found that installation of the Curt Class III Trailer Hitch, item # 13571, on the 2006 Nissan Murano S model requires lowering the exhaust on both sides of the vehicle, for installation of the hitch. You do not need to bend or manipulate the exhaust in any other way and when the install is complete you will return the exhaust to its factory position. We have a video review of a hitch install on a 2006 Murano for you to...
  view full answer...
• Recommended Weight Distribution With Anti-Sway For Lifted 2011 Toyota Tacoma
  The 2015 R Pod 171 Hood River Edition is a fairly light trailer, but with your lifted truck and this combination, I recommend using the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600 system. The Anti-sway and weight distribution of this system will allow you to do your mountain camping without issue. You will need the 2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs # EQ91-00-6080 for this application as...
  view full answer...
• Availability of Keyed Alike Sets of Master Lock Receiver and Coupler Latch Lock Set Part # 1481DAT
  The Master Lock Hitch Receiver and Coupler Latch Lock Set, part # 1481DAT is not available keyed alike. Both locks in the set are keyed the same, but we are unable to obtains multiple sets that are keyed alike. If you are interested in multiple units of hitch and coupler lock combo that are available keyed alike, take a look at part # e99039. I apologize for any confusion.
  view full answer...
• Recommended Trailer Hitch Receiver and Weight Distribution System for 2005 Safari Trek and Trailer
  For your 2005 Safari Trek motorhome, I recommend the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 which can be welded or bolted to the frame of your motorhome. This has a 5,000 lb capacity without weight distribution or 6,000 lbs with weight distribution...which would be required in your case. Based on the trailer and vehicle weights you gave, I recommend the Strait-Line Weight Distribution System w Sway Control - Trunnion Bar - 12,000...
  view full answer...
• Is Bumper Fascia Cutting Required for Installation of the Curt Hitch #13251On a Jeep Grand Cherokee
  If you are installing the Curt Class III Trailer Hitch, item # 13251, on a 2005 to 2010 Jeep Grand Cherokee (except SRT8), there will be no cutting of the fascia required to install the hitch. If your vehicle has any aftermarket parts, then that will need to be determined at the time of installation. Some items you may need with the Class III hitch are listed below. Drawbar # 2923 Hitch Ball # 19260 or # 19247 Hitch Lock Kit # e99039
  view full answer...
• Are etrailer Ball Mount and Trailer Coupler Locks Available Keyed Alike
  We have just the right item for you. Deadbolt offers a two-piece lock set consisting of a hitch lock that fits 2-inch Class III and Class IV hitches and a coupler lock with a 1/4-inch pin diameter and inside width of 1/2-inch. This set is part # e99039. This two-lock set comes pre-packaged with both locks keyed alike.
  view full answer...

Do you have a question about this Trailer Coupler Lock?