Hey Deven, thanks for reaching out, and good question. For a 12 volt system, the charge controller can handle one 200 watt panel. For 24v systems it can do two 200 watt panels. So while the kit technically is expandable, with your 12v system, the one…
No, I am sorry Stephan they can not. We only have two hitches for the non-hybrid models of the 2021 Hyundai Elantra. The Curt item #C53NR and the Draw-Tite item #DT75MR. Neither one of them will fit the N-Line and none of our other vendors have a…
Hey Jerry. Since your Progressive Dynamics PD4060 doesn't have the lithium switch the Replacement Converter Section item #PD4060CSV is exactly what you need. A 60 Amp Converter like item #PD4060CSV is powerful enough to charge a 300 amp hour…
Hey Susan, sorry to hear about your microwave. Due to it's age I wasn't able to find it's dimensions to pick out a replacement that would closely match it but I was able to determine it was a 1.0 cubic foot microwave like the High Pointe…
Hey Greg, thanks for reaching out. We do offer a hitch and a plug-in wiring harness for your 2024 Hyundai Elantra Limited. For the hitch I recommend the Draw-Tite #DT75MR. I prefer this hitch over the other, because the design allows more of the…
The Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item #DM13205-95 that you referenced will fit a standard a-frame trailer. This is a bolt on coupler so you won't have to borrow a welder. To install you will want to use 3/8 inch, grade 5…
Yes, so long as you have a standard a-frame trailer you will be able to replace your current welded on coupler with the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K item #DM13205-95. I have attached…
It sounds like you're looking for a replacement a-frame coupler like #CA-5280-RB but in a silver-painted or zinc-plated finish. Please click on the link provided to see all bolt-on standard a-frame couplers for 2-5/16-inch balls. For the…
Thanks for that photo, I do appreciate it. And all of the couplers we have - and indeed all the ones I am aware of - require a frame that is fully engaged. While Demco was not able to provide a dimensional drawing, we did measure the Demco 50-Degree…
Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler #DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for…
Unfortunately we do not have a jack that mounts in the A-frame location on your trailer that would allow you to be able to fully open your tailgate but I may have a solution for you. I recommend a jack like part #HD50000101. This is a sidemount…
We have several 5,000 lb Bulldog trailer jacks but I was not able to find your exact part number. If you check out the link I attached you can see all of the 5k Bulldog jacks we carry. The closest matching part number we have is the part #BD155032…
Filters
