Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ever struggled to see your trailer's boundaries at night? The TecNiq Mini LED Trailer Fender Clearance Light features vibrant amber LEDs facing forward and red LEDs in the rear. This dual-color design makes your vehicle more visible, ensuring safety on the road, and allows other drivers to see your trailer clearly from all directions.
Worried about water damage during those rainy road trips? This LED light is completely submersible and IP68 rated, making it dust and water-proof. Its military-grade construction and urethane potting provide superior protection against the elements than common epoxy coatings, giving you peace of mind no matter the weather.
Tight on space but need reliable lighting? With a sleek profile measuring just 1-1/2 inches long by 3/4 inches wide, and a depth of 3/4 inches, this light fits snugly onto any trailer fender or side without being obtrusive. It's a perfect fit for small or crowded areas like your trailer's narrow fender.
Had enough of constantly replacing lights? These premium LEDs are not only energy-efficient and long-lasting, but the robust construction is rated to last over 100,000 hours. You’ll enjoy fewer replacements and more time on the road with consistently bright performance.
Hesitant over complicated installations? This light offers straightforward, no-fuss setup with a 2-wire pigtail -- one wire for power and one for ground. Its surface mount design and included instructions make it easy to install, whether you’re updating existing fender lights or adding new ones.
Wondering if your trailer lights meet safety regulations? Rest easy knowing this light exceeds FMVSS 108 standards for clearance marker lights. It’s designed for a low profile that doesn’t compromise on visibility, helping to keep you compliant and safe on the road.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this TecNiq Submersible Mini LED Amber and Red Trailer Fender Clearance Light. Now, this is a dual clearance light that'll install on your trailer fender. You can see it is a clear lens, and it's over one red LED and one amber LED. Basically, the amber LED is designed to face the front of the trailer, and the red LED will face the rear of the trailer. It is a reversible assembly, so this can be installed on either the driver's side or the passenger's side fender.
They use premium LEDs, they are energy efficient, long lasting, and vibration resistant, they are rated for up to a 100,000 hours of operation. If you noticed, this is a sealed waterproof unit, does include this nice, durable polycarbonate housing and a UV resistant lens. They do use military grade construction of the circuit board of this light, they use urethane potting, which gives you better protection than the common epoxy potting, and as we mentioned, this is a surface mount design. Now, the installation hardware to install this is not included. Now, the distance between the mounting holes, center to center, is gonna be one inch.
They do offer an available cover for this that'll add a nice protective case over the light, we do sell that separately on our website, it's part number TN88XR, and it is listed on this product page as a related product. As you can see, it is a two wire pigtail, the length on the wires is about nine inches. The white wire is for the ground, the red wire is for the power. Now, at the end of this video, I'm gonna hook this up to some 12 volt power just to show you how bright the light is and the different colors. This does meet or exceed the Federal Motor Vehicle Safety Standard 108 standards.
It is for a quantity of one fender light, input voltage, a 9 volts to 14 volts, power draw of 0.04 to 0.07 amps. Last thing I wanna do is give you dimensions before we hook it up. But the overall length of the whole light edge to edge is 1 1/2 inches. The width of it is 3/4 of an inch, and the overall height on it is gonna be also right at 3/4 of an inch. So what I'm gonna do now is we're gonna go ahead and hook up our ground wire, and we'll go ahead and hook up our power.
Once we got them both hooked up, I'm gonna go ahead and turn on the 12 volt power, and you can see the light will come on just like that. And then I'll go ahead and turn off the overhead light, so you can be able to see. But if you noticed, if I turn this one, the red light is on this side, and if I turn it this way, you can see there's your amber light. There's your red light, so as we mentioned, the red light will face the rear of the trailer, the amber light will face the front of the trailer. You can see it does give off a nice bright shine. Go ahead and turn back on overhead lights, and we'll go ahead and turn off our power, disconnect it. But that should do it for the review on this TecNiq Submersible Mini LED Amber and Red Trailer Fender Clearance light..
Good price. Exactly what I needed to replace a burned out one. The shipping was quick
Worked great and was easy to install.
Product is fine. Delivery horrific! Over a week. Sent to GA, then to NJ to arrive in Florida. Someone needs to buy the USPS a globe or map. Even better idea etrailer, stop being cheap amd ship with reliable FedEx or UPS
Still working great and fast processing and shipping!
One year on my travel trailer exposed to the elements and still going strong. The compact design keeps it out of harm's way while still being quite bright.
Added these to the fender of an enclosed car hauler. LOVE them. On a highway trip I had lost my brake and turn signal lights and did not know it. I can see these in my rear view mirror to verify the lights are working. Very small, but nice and bright.
Fit my existing bracket perfectly
these are great fender lights, small, easy to install, and very bright, worked great on our cargo trailer that has black fenders hard to see at night, these lights fixed that problem
I needed to replace the broken LED light on my enclosed trailer. This was an exact match for the ones that were originally on our trailer and fit perfectly in the existing holes in the fender.
Great service, the best price in the market. Thank you for been so professional
Color (amber) is a little off from the OEM, but a great replacement and would recommend.
exactly what i wanted but delivery was a bit long
Works as intended. Matched the original light.
I’m am very happy with my etrailer purchase.
I had a question about shipping and received a very quick response from Amy.
I was very happy that they were willing to ship USPS to Canada for a very reasonable cost!
Trailer lights arrived today and are exactly what I was looking for.
Exactly the right replacement
Exact fit for 2017 Rpod
I called and ordered , I like talking to a person , but I’m sure you can order by website , received my order in a timely manor
Product was exactly as ordered along with a tracking number and follow up to make sure I was happy. Great experience and would definatley recommend to others
Great price
Perfect fit and excellent quality over the single wire version originally on my Empire single axle trailer. Added a terminal to ground to the fender and it works perfectly.
Just what i orderd
Perfect products for my application and delivery time was wonderful. Very happy with this website and company, and plan to use it more often in the future. Great experience!
Product was what was shown on web site. Order arrived within days of order. Will order again soon.
Ordering and recieving the items was quick and easy.
Very Happy with the leds and the service !!! AAAA+++
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
2/9/2025
Still working great