Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey there, the Dexter U-Bolt kits like the part #APUBR-1 are made in the US and Canada.
view full answer...Hey Josh, the dimension for both jacks that you are looking for is the bracket height. This is the distance from the center of the jack's mounting bracket down to the ground when extended/retracted. On the shorter part #e34RV the bracket height…
view full answer...You would choose a side wind or top wind jack based on several factors. Each has its advantages. If clearance is an issue for the radius of a top wind, then you would choose a side wind. The opposite is also true. It is my experience that a side…
view full answer...Hey Bob, Landing gear components aren't all interchangeable between brands so I'd need to know the exact model to find replacement parts for your current system. If you're just wanting to replace the landing gear as a whole then I'll…
view full answer...Yes the pipe diameters of the #BDPG9810-00 and the #TJDP-7000S-B are the same. Both of them have a 2 inch inner diameter and a 2-1/2 inch outer diameter.
view full answer...Hey Chris, I recommend checking out the Dutton-Lainson Hand Winch w/ Automatic Brake #DL15761 which has a slightly higher weight rating at 2,500 lbs and has a 9-3/8" long handle. The handle is a bit long, but it's positioned on one end of…
view full answer...The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…
view full answer...In regards to the Square Pipe Mount Swivel Jack part #TJDP-7000S-B, the pin that is used to secure the jack to the pipe mount is 5/8" diameter.
view full answer...Hey Don, You can just install the Electric Lockout Solenoid #T4748800 between the actuator and brake line in order to get an electric lockout so you can back up your trailer without the brakes engaging.
view full answer...Hello Scott, thanks for reaching out. For a 4 wheel trailer I recommend the TST TPMS System #TST-507-RV-4-C. This one comes with 4 sensors, a signal booster and a color display. You can alwasy add more sensors if you want to monitor the vehicle tires…
view full answer...Hey Alan, so the Ram Jack part #TJA-5000S-B that you referenced does have a wheel caster available for it with the part #JC-101.
view full answer...I have a solution for you, but the bracket height of the Dutton-Lainson Round Trailer Jack #DL22210 has a bracket height of 16-5/8", so it would not be short enough to be used on your trailer. I recommend usinig the Fulton F2 Swing-Up Trailer…
view full answer...Related Searches
Filter Your Search
Contact and Help