3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket (not included). Accepts 1-prong or 2-prong plug. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronics Fender Clearance LED Submersible Trailer Light, part number MCL65CARB. This trailer clearance light lights up red in the rear and amber in the front. It's going to help you remain DOT compliant for trailers over 80" wide. You want to be sure and pick up 2, 1 for either side. You can simply mount it to the top or side of your fender to help you highlight your trailer's widest point. It has a sonically sealed waterproof housing and is completely submersible, and because the lights are LEDs, it's going to be more efficient and last a long time. It's a very easy installation, if you don't have a base or a wiring harness, we have one here at etrailer.com, you can pick it up with part number A65PB.
When putting your light on, you want to be sure and identify which is the rear and which is the front, so there's a little sticker on the back for the red, which we want to have pointing toward the rear and we just simply line up the plugs, and push it in place. Listen for the snap on the front and rear, and then we've got it. Let's try it out. Looks great. If anything we're to ever happen to the LEDs, they feature a lifetime warranty. That's going to complete our look at the Optronics Fender Clearance LED Light, part number MCL65CARB..
Good quality Good fit Easy to install
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.