Search: heavy duty hitch extender   >   !Trailer Tongue Lock   >  

Hi Paul, The original Yakima OnRamp has been discontinued, and there are a number of different upgrades that come with the Yakima OnRamp LX Bike Rack for 2 Electric Bikes #Y88DJ. The most important for most people is probably the capacity; while…

If you have a 2-1/2 inch hitch installed on your truck then you can use a hitch extender like the Curt part #C45048 which can give you from 24 to 34 inches of extension. You should note that when you use this extender the towing capacity is 6,000…

For a 24 inch hitch extender the best option is the Curt part #C45048 cut down to the 24 inch length. This has a capacity of 8,000 lb trailer weight when used with a WD system like you mentioned. Since this is the only extender option that's…

An extender like the #ST18 does provide a handy way to provide additional space between the truck and the trailer. The only down side is that using this extender will decrease the towing and tongue weight capacity of your truck's hitch by 33%.…

The older Lance truck bed campers use a proprietary plug and we don't have an adapter for this. We don't carry it but Lance does offer a matching vehicle side trailer connector for this but I recommend just converting the trailer connector on…

The Optronics 7-Way Connector - Trailer End #A7WCB will handle 8-gauge wires on the positive and negative connectors. If you want the same gauge wire on the vehicle side, I recommend the Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

I do have a solution, but since Lance has their own plug design there are no adapters that will work, including the #47595. The best option is to replace the lance plug with a standard 7-way blade connector like the #PK12706. This will eliminate the…

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

Since hitch extenders like the 11" Roadmaster #RM-071 you show in your pictures reduces the weight rating of the hitch by 50% we typically recommend avoiding them as a solution. For your application we have ball mounts with extended shanks that…

You could use the Masterlock Padlock set part #ML4683Q to lock the threaded hitch pin of the Roadmaster Anti-Rattle Hitch Extender part #RM-071-1075 that you are interested in. You'd just need to use the lock in place of the cotter pin. The…

To install a roof vent lid like the Replacement Lid for MaxxAir MaxxFan Deluxe #MA05-30510 for the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-05301K, isn't considered to be a difficult task at all. The unit does not have to be removed from the…