Product Expert Matthew S's Opinion
Heavy-duty e-bike rack has a ramp that lets you load your bikes with no lifting required. It folds up for compact storage, and it has built-in handles and wheels for easy transport. Rack tilts with bikes loaded for cargo area access. Locks included.
Features:
Specs:
The EasyFold XT platform-style rack is specifically designed to reduce the burden of transporting e-bikes, free-ride bikes, downhill MTBs, and other heavy bikes. It includes a ramp that lets you easily roll your bikes on and off the rack without lifting. The rack folds up for compact storage and has an integrated handle and wheels that make it easy to roll to and from your vehicle. It has independently adjustable arms with padded clamps that grip your bikes by the frames. You can tilt the rack with bikes loaded for access to your vehicle's rear cargo area. It also includes locks that secure your bikes to the rack and the rack to your vehicle.
A folding, aluminum ramp is included so you can roll your bikes on and off the rack- no heavy lifting required. The ramp extends 36" to create an angle small enough that you can roll your bikes up and down it with ease. There is also an extra-long, 53" ramp (sold separately) available for use when your EasyFold XT is installed on an SUV, van or other tall vehicle.
The ramp fits into grooves at the end of each wheel tray.
When you aren't using the ramp you can fold it up and store it onboard the rack.
The EasyFold XT folds for easy transport and compact storage. The wheel tray folds in half and there is a small lever under the base of the rack that lets you fold up the shank.
It has an integrated handle and wheels that make the rack easy to roll to and from your vehicle.
The EasyFold XT's dual arms are detachable so you can reposition them anywhere along the upright tube to fit bikes of any frame style.
Clamps with built-in Road Dampening Technology (RDT) pads grab your bikes by the top tubes or downtubes to ensure safe transport with minimal movement and noise. The clamps can be rotated to grab bike frames with angled downtubes. The clamps include AcuTight knobs that click when they are tight around your bike frames. This prevents you from damaging your bike by over-tightening the knobs.
The EasyFold XT's molded wheel trays can carry e-bikes, downhill MTBs, and most other heavy bikes. The top half of the wheel trays are made of durable, weather-resistant ABS plastic. The anodized aluminum bottom half provides a rigid outer shell without adding much weight to the rack.
Ratcheting wheel straps with quick-release levers let you secure your bike's wheels to the tray. An adapter kit (sold separately) converts the wheel cradle sets for use with your fat bike tires.
The EasyFold XT tilts forward with bikes loaded for convenient access to your vehicle's rear cargo area. To tilt the rack, just press the handle at the front of the wheel tray. To return it to the upright position, push the rack back toward the base until it locks into position with an audible click.
The knob on the side of the shank lets you quickly and easily install the rack. Just slide the shank into your hitch and turn the knob until snug. The knob deploys an anti-rattle wedge in the shank to help take play out of the hitch connection. It also sets the integrated SnugTite hitch pin into place, securing the rack to your receiver.
The EasyFold XT includes One-Key System locks to secure your bikes to the rack and the rack to your vehicle. Locks on each frame clamp knob secure your bikes to the rack.
The lock on the hand knob secures the rack to your vehicle. The hand knob will spin freely when locked so a would-be thief can't operate the knob to remove the rack from your hitch. The locks are keyed alike so you can use the same keys for all of the locks. Additional One-Key System locks (sold separately) let you make all of your Thule products keyed alike.
Hitch Compatibility
The rack works with both 1-1/4" and 2" hitches. To use it in a 1-1/4" hitch, simply remove the adapter with the included Allen key.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Thule EasyFold XT. This is a platform style, two bike, rack, designed for use with electric bikes. It works with inch and a quarter and two inch hitches. The part number is TH903202.Now, the EasyFold XT is quickly becoming one of the most popular bike racks offered. Basically it takes care of a lot of problems that we have, especially with eBikes becoming more and more popular. While this racks designed to carry just about any bike that you want to, it has a weight capacity of 65 pounds per bike.
That's gonna give us 130 pound total capacity, which is really quite high. Also to solve another issue with those heavier bikes, getting them loaded and getting them unloaded. We've got a ramp that we can put on each end and simply roll our bikes up and on, versus other styles of racks that have the center post that comes up here in the middle. We've gotta get that bike from the ground. We gotta lift it or maneuver it around that post and get it secured in.
This is just a much easier way of getting that done.Now, it's also been designed to tilt way back away from your vehicle even with bikes loaded. This gives us excellent access into that rear cargo area. It's easy to operate right here from the rear. You can either use your foot and step down on it or simply use your hand. As you can see that tilts well out and away from our vehicle.
It's going to give us pretty much unobstructed access into our rear hatch area. You'll notice in this position you're going to have a lot of room in between the rear of the vehicle and the base of that rack, making getting things in and out extremely easy. Now, when going back into the upright position, we just want to lift on the bikes until we hear the click. You can see at that point we're nice and secure, ready to get back on the road.Now, bikes these days come in a lot of different shapes and sizes. You can see here we've got our eBike installed, full suspension bike.
There's a lot of obstacles that need to be overcome in order for this to work properly with a bike rack. With the EasyFold XT, you're going to have arms that are fully adjustable. We can move these, which you'll see in a minute here, all the way around this bracket here on the back. That allows us to conform it to many different applications. Something else really helpful with this rack is that we don't have those wheel hooks. Traditionally, we have hooks on a lot of the platform style racks. They're going to go right over here. They kind of compressed down. That's how the bike's held. They do a good job, but if you have any type of fenders on your bikes or if you have a rack on the back, that's going to cause you issues. This is gonna hold your bike on a portion of your frame depending on the bikes that you've got loaded up, and it's going to eliminate that issue.Another nice thing I like about the rack, generally with a platform style rack, once you get this fully loaded, as you can see, you really can't see that license plate on the back of the vehicle. We've got accommodations right here on the back, so you can take that plate off, place it on here, so we remain legal. Now, since we had the two bikes loaded up already, we're going to head down to the test course. We're gonna take a look at how it looks in action. Something you want to keep in mind, when you're loading multiple bikes, you always want that heavier one closer to your vehicle.Here on our test course. We'll start by going through the slalom. This is going to show us the side to side action. This simulates turning corners or evasive maneuvering. Once we get to the full speed bumps, we'll see the up and down action. This will be just like driving in and out of a parking lot, parking garage, or driveway. As you can see, it really performed pretty well. I was expecting more side to side movement on it when we got through those alternating speed bumps, so I think all in all it stacks up about equal or even better than a lot of platform racks I've seen.Now, something I really like, and it's a pretty simple thing, but basically our strap, it's not going to be left hanging here. Right at the tip where it connects to the rack, there's a slot, we can bring that around, and we can tuck it in and get it out of the way. Now again, that's not a huge thing, but with as many bike racks as we deal with, these straps are all the time all over the place. It's nice to be able to get them secured.Now, let's go over a few of the specs required for your bikes, so we can make sure this is going to work for your application. The wheelbase of your bike can be up to 48 inches. That's going to cover a wide range of the bikes. As far as the frame diameters and what the clamps are designed to work with. We can go just over three quarters of an inch in diameter all the way up to just over three inches, so you're going to have a really wide range there. If you've got wider tubes on your bike, kind of like what we've got here, or if they're a little bit more narrow like something we see up here, should work out really well for you.Now, as far as tire size that you can use, let's take a look at our cradles here. You can see we've got the narrow groove right here to help out with those road bike tires. Then as they get larger, they're going to sit on top. Now with the strap that comes with it, we can go up to a three inch tire. It's going to be just a little bit larger than what we have here, and if you need to go beyond that, you can go all the way up to four and 11 sixteenths. You just need to pick up the fat tire strap. That part number is TH985101.Now, something they've introduced to the cradles. It's going to help out a lot when it comes to the more sensitive frames we find on bikes. It's going to be road dampening technology. You see, while it's not super soft and it's not going to allow your bike to move a whole lot, the entire cradle all the way around the outside here and also in each of these little grooves that you see, it's a slightly softer material. As it grabs a hold of the bike as we're going down the road, it decreases the amount of that force that's being put into the frame of the bike. Now for additional protection, maybe you've got a high end carbon bike or maybe you want the ultimate in protection for your paint finish, we do have the carbon frame protector available. Part number is TH984101.Another area where Thule's really gone above and beyond on this rack is going to be in the reflectors. You can see these are nice and large. We're going to have one on each corner to help improve visibility. Where this differs from a lot of other racks is, generally, they're just going to have maybe a little piece of tape here that has some reflective property to it or something like that, whereas here we have a nice salad acrylic reflecting.Now, when it comes time to load up your bikes, if you want to use the ramp to make it a little bit easier, we want to push down on our tilt lever. We'll tilt the rack back, and that's going to be stored right in here. Unlike the old EasyFold, this is going to be part of the rack and not something you have to store in your vehicle. Just going to lift that up and out. Tilt our rack back forward, and we're ready to fold down each of our cradles there. Then just unfold the ramp. Once we've got that clicked into position, we want to take our tab, we're going to slide it right in the slot. You'll feel it click, and it'll come down, giving us her angle. At that point, we'll just ride their bikes on up. We'll get them positioned how we want. Then we'll bring our frame clamps up and begin to tighten it down.Now, there's going to be, almost like a gas cap, some clicks, once it's secure enough. You'll just want to make sure that clicks a couple times and then we can move on to our wheel straps. We'll bring that around our wheel, down into the ratchet, then we can pull up there just a couple of times to get it nice and secure. Do the same thing for the rear wheel. Once we have everything secure, can remove our ramp and slide it in either this end where it'll go in both of the other ends. Once all of our bikes are loaded, we want to get this folded back up, just like that, and store it back underneath. You'll want to ensure that the black arrow on the ramp, and the white arrow on rack are in line. Press down firmly and it's going to clip right into place.Now, we've talked about how much adjustability that we have with this bike rack and being able to carry many different types of bikes. Basically, this arm is fully adjustable. We loosen the knob. That allows our clamps are open, but it also allows us to slide this part of the arm rearward. See As we do that, this is going to open up for us. Once that's opened, it can be positioned anywhere along this tube that we need, whether we want it facing up, maybe we want it facing down, to accommodate all those different types of bikes and make sure that we can get multiple bikes and multiple configurations loaded up.Now, not only can we lock the bike rack to the vehicle, but we're able to lock our bikes to the rack. With the tumbler facing the unlock position, that allows us to secure our bike. Then we can move that into the lock position, and no matter how many times we turn this knob, it's not going to loosen up any at all, so that'll prevent that bike from being removed. Now a couple measurements we like to give you the help insurance gonna work for your vehicle, is gonna be from the center of your hitch pin hole to the upright portion of the rack here. It's about eight inches. Then from that same point, to the very backside, it's going to be about 35. Now, in the stored position from the very outside edge, not including the plate of course, but from the edge of the rack to the edge of the rack, it's very slim, at only 10 inches.Now, Thule's really thought about a lot on this rack. They make it easy to get tension to your vehicle so it's not moving around. They make it easy to get the bikes attached. They make it easy to tilt away, but they also make it extremely easy to store. Once we have this loosened up, we'll pull our pen. Of course, that's going to allow us to remove it from the vehicle, but as we do we've got a little lever down here. We pull down on that, you can see how we can kind of tilt that towards our vehicle. Let's continue to remove it. We'll place it right down on the ground. Now this stinger is going to come up into a stored position. Now, from this position, you can either grab it by the easy handles here, lift it up, and carry it, or if weight's an issue for you, they've got wheels right on the front so you can just kind of tilt it and walk it along.Now of course you can see, being this compact, it's going to be easy to store and it's not going to take up a lot of room in your garage. Now in the stored position, we've got about 12 inches of width. From the front to the back of the rack, it's about 26 inches. Then from the ground to the top, about 28. The EasyFold XT also receives really good reviews. It's kind of like Mary said, "This is the best bike rack. We have electric bikes, which are heavier than most. eBikes can weigh in at approximately 50 pounds. This bike rack has a ramp, which allows us to easily roll our bikes right up to the rack, and we do not have to do the usual heavy lift. The tilt away feature makes it so easy for us to remove items from our vehicle without the need to remove the bikes from the rack. Finally, what makes this incomparable to any other rack, is that we can easily fold it up and carry it into the garage. No more ramps or wheel holders sticking out and consuming the space in our garage. This is an excellent product.".Now, one thing I really like about this bike rack, unlike a lot of others that require a lot of assembly and a lot of time once you get them, basically you open the box, you're gonna pull out the upper cover. Then we're just going to lift the bike rack up and out. Here you can see we've got our keys, so let's hang onto those. We just need to remove the packaging material. Once we have that packaging material off, we just want to push our stinger down until we hear the click, and at that point it's ready to install on our vehicle. Here at the top we've got the two handles we want to grab a hold. We'll grab a hold of our stinger, and we're going to press out on our black bar. With that open, we'll slide it into our hitch, and will want to ensure that that pin goes into the hole on our receiver tube. Now we'll want to put our knob in the engaged position, and we're just going to turn that clockwise to tighten.Now, when I do this, I like to move this rack up and down. I like to move it side to side. It's going to help us get all of the play out of it. Once you've got that nice and secure, we'll use the lock here. That's going to disengage that not knob. Now at this point, we can turn this handle as much as we want and our rack's not gonna loosen. That's going to make sure that it doesn't go anywhere.That's gonna complete our look at the Thule EasyFold XT. Part number TH903202.
Average Customer Rating: 4.9 out of 5 stars (64 Customer Reviews)
Heavy-duty e-bike rack has a ramp that lets you load your bikes with no lifting required. It folds up for compact storage, and it has built-in handles and wheels for easy transport. Rack tilts with bikes loaded for cargo area access. Locks included.After receiving the platform, I was able to install it and load my bike (55 lbs.) all by myself. See attached photo. Note: I am 66 yrs old, 5'2", and 95 lbs. Because of this excellent product's features, I increased my independence in my travels. The instruction book was only pictures, but I called my CSR at etrailers and he answered my questions. What a fabulous company. They are all about customer service and satisfaction. Many thanks, guys. 582302
Marilyn - 11/13/2019This rack works perfectly for an e-bike. The ramp that came with it made pushing the 35 lb bike up to the ramp a piece of cake. 505125
Liane - 05/07/2019Haven't had a chance to install the rack yet, but wanted to say that the service, order processing and delivery was top-notch! Thanks Ricky S! Fastest processing and delivery I have ever experienced! I will update with a a review of the product shortly. 184223
Finding a bike rack suitable for two ebikes having fenders and rear rack was a challenge. Add in that one bike was a traditional mens bike with a top tube and the other was a traditional women's frame (step through), it took us awhile to decide on the Thule EasyFold XT2 from etrailer who have been fantastic to deal with. The rack arrived on time, and in excellent condition. You can literally take it out of the box and mount it on your vehicle. It look a few minutes to figure out the best way to attach the frame support bars, but because those bars can be removed and repositioned it attaches solidly and there is no movement of the bikes once mounted. Positives: - the rack folds up on the vehicle into a small package when the bikes are not mounted; for storage purposes it is about the size of a suitcase; it is on rollers, when attached and bikes on it, it folds away from the vehicle in a big way and, etrailer had it on sale for $150 less than the original price during Labor Day. There are no negatives - Love it! 564083
Great bike rack - easy to use & very stable for our 2 heavy bikes. Now we can go to trails we couldn't reach from our house. Hello FUN! 375929
This is the best bike rack! We have electric bikes, which are heavier that most bikes. Ebikes can weigh in at approximately 50 lbs. This bike rack has a ramp, which allows us to easily roll our bikes right up to the rack, and not have to do the usual heavy lift. The tilt away feature makes it so easy for us to remove items from our vehicle without the need remove the bikes from the rack. Finally, what makes this rack incomparable than any other on the market, is that we can easily fold it up and carry it into the garage! No more ramps, or wheel holders sticking out and consuming the space in our garage. This is an excellent product!! 507806
Mary F - 05/11/2019This has turned out to be an excellent choice to carry an Electra eBike and another bike. We needed a carrier with capacity to safely move a 50+ pound eBike and found several candidates. Although this is the most expensive, after a bit of deliberation and some contact with etrailer, we selected this one. The clamps and straps do not interfere with eBike bike fenders. Some other carriers have a different restraining method. The capability to locate the clamps on nearly any spot of the vertical bar makes it great for carrying any combination of the bikes we own. It is extremely easy to roll it out of the garage and set it up. Without hurrying, I can get it installed and two bikes on it strapped and clamped and ready to go in less than 15 minutes. Installing and using the carrier is exactly as it is shown in the videos. Very simple and very secure when installed. I have tried the ramp just to see how it works and I think it is solid enough to move any eBike. Presently we don't need to use it, but one day we will and I think this rack is solid enough we will still be using it. Being able to mount the vehicle license plate on the carrier is a nice feature. Plate is not obscured by the bikes. I have never been stopped for that when using any other carrier, but now there won't be a reason! I was initially concerned about the distance the plastic parts of the carrier would be from the exhaust tips on our 2017 Hyundai Santa Fe Sport 2.0T. A few years back I melted a tarp on a cargo carrier while on a trip and did not want to melt an expensive bike carrier. I checked a bunch of measurements I could find online with retailers and the mfg. I emailed etrailer.com to find out what I did not know. Conner L was quick to answer my dimension questions and created an answer page; great service and I appreciated that. John Huff followed up to ensure I got what I was looking for. I think there is plenty of clearance, about 16 inches horizontally, and the carrier is nearly 3 inches above the exhaust tips. Photos attached. We have done plenty of local trips and not noticed any affect from the exhaust. When the carrier arrived it was well packed. One minor problem was the reflectors seemed to have fallen out of their receptacles and got stuck to the plastic bag at the bottom of the box containing the documentation. Maybe due to being in hot shipping trucks this summer. I emailed etrailer and got several responses from folks. They took my problems seriously and sought to resolve it. Great service. I was concerned the double stick tape was not tacky and no longer any good- they sent me a new set of reflectors right away. Could not ask for better service from Carole, Jesse, Nicole, and Korren. Quality products and quality service made me a very happy customer. Although this seems like it is an expensive carrier, it is very well designed and works like a dream. Because it is so easy to use, I use it a lot more than my previous carrier. It seems like it will provide long term value in dependability and ease of use. 680525
Found the bike carrier with ramp to be extremely easy to use, it is light maneuverable & storable. I have a four-wheel-drive full-size Chevy Silverado pick up with a Lance 8.5 over the cab camper. Using a 7 inch hitch extension, I’m able to still enter the camper with the carrier in the down position, as shown in the picture. With the camper on the truck it’s easy to get my Mt. bike And my wife’s E bike on & off the carrier with the ramp. But with the camper off the truck the ramp is almost straight up and down, the truck is not low enough, and the ramp is not long enough. So I have to put a 10” step bench underneath the ramp so that I can get the bikes on and off using the ramp. I also purchased the Swagman RV horizontal 2 bike bag. The problem with the bike bag is that the little hole that slips through the hitch receiver is not big enough to go over the wheels of the carrier. So you must cut a hole big enough (10”x12”) to expose where the ramp is stored and the carrier latch points are exposed, so that the carrier will snap back & lock in the upright position. Then the bag will fit two bikes with this bike carrier. 655214
First the negatives: if you have a aftermarket mid-drive electric beach cruisers to load using the ramp you'll run into a bit of a problem. When loading the first one you'll bottom out mid way up the ramp, meaning the motor hits and you'll need to lift up the back end of the bike to get it up there. Then you'll need to lean the bike toward yourself to get the pedals past the upright black bar that the holders are attached to, this is a bit awkward due to the weight of the bike, the angle and height you are working at. You are probably better off just lifting this style of bike onto the carrier. When loading the second bike you can forget about using the ramp all together due to how narrow the placement is on the carrier between the two bikes. To me this carrier appears to have been designed for lightweight road bikes that have narrow profiles. One of my cruisers has fat 3.5 inch tires. Before purchasing the carrier I did ask one of the experts on the site if I would be required to purchase the extra long tire straps. He said "NO" and that the carrier could accommodate tires up to 4-11/16, well that question has since been modified to read "YES" you do need to purchase the extra long straps. Some positives: The ability to roll the carrier to the car is a nice feature. The way it screws to the hitch and it's ability to lock to the hitch is a plus. The bike clamps feel very secure and gives a peace of mind that your bikes are firmly in place and not going anywhere, even when parked thanks to the locking feature of the clamp. A decent carrier with some flaws. 543216
I have had many hitch bike racks but this one is the best by far. Dead easy. Compact folding for storage. Not too heavy but very sturdy. I have a heavy electric bike and the ramp is a godsend. There was a problem with it but etrailer was quick to rectify. Customer service top notch. I consulted online with an expert and he gave me some options. My criteria was heavy bike, may have to do it all alone, compact for storage ,and no worries that either it or my bike will fall off the back of my truck. It’s got locks for security. The fold down option is an added bonus. I can lower the tail gate with the bike on. I hesitated because it is expensive!!! But you will know and appreciate where the extra money went. I tried to get away with less but have thrown so many out I just went with it and I am glad I did. 474520
This is a great bike rack for heavy bikes. Loading and unloading bikes is relatively easy and the rack itself is compact and detaches from the hitch like a suitcase on rollers. Etrailer offers incredible service and support. 561642
Works great. Comes completely assembled. First day I hauled me two E bikes about 40miles and they never moved. I did have to load my bikes a few different ways till I got to where I was satisfied. I ended up facing them in different directions and had to remove the arms that secure the bikes and place them where I thought they would work best. The carrier sticks out about 34" when on the back and doesn't fold in any closer to your vehicle. When your not hauling your bikes it would be best to remove the carrier. Not able to see the carrier when there are no bikes. It did lean out far enough that I was able to open my tail gate completely. I would have given it a five star but the instructions are terrible. So much for the days where things are actually explained instead of pictures. If your reading this then I would suggest you watch there instruction video on you tube. It helps. 561238
Product arrived quickly, very well packed and protected. Bike carrier is easy to carry, install and remove from the vehicle. Excellent choice for a heavy ebike. 454363
after carrier got here was little concerned about tire slots..sure would be nice if inserts were made to accommodate up to 4 inch tires... easy to unpack and packaged well. will try it out next week after get back from out of town trip. 298202
I love this bike rack. It is very easy to install. We have it on our Audi Q3 and it works great allowing us "seniors" to roll two heavy e-bikes onto the platform. Just as important it easily swings away from the trunk to provide easy access without removing the bikes. The Thule platform is very stable, easy to remove and folds to roll into the garage or cargo space in Q3. 754919
Although I have not had a chance to transport my 65 pound ebike on this excellent hitch mounted bike carrier, the product looks to be perfect for my needs. The box arrived in great shape on the delivery date promised. The only negative was both of the plastic red reflectors were popped off of the rack and stuck on the inside of the shipping carton. I replaced them, but if they keep falling off, I’ll be back to etrailer for replacement reflectors. 747611
Excellent product and great customer service.My order was shipped very quickly an arrived in perfect condition. 745996
eTrailer delivered very fast and free. The bike rack seems very sturdy but it is going to be a challenge put my 2 eBikes on the rack. Biggest issue is that the clamps do not twist in the right direction to grip the “Mate” bike frame. The frame is large in most areas and the one down tube where it will grip is at an odd angle. Will keep trying though as I really like the rack otherwise. 736648
Got this to haul two fat-tire Ebikes. It is about the only model available that will carry two 63lb bikes. One of the reflectors fell off the first time I used it, but etrailer sent out a replacement. Nice that it adjusts to grip bikes that do not have a horizontal crossbar. Yes, it is expensive but it does work great. Two friends have also purchased this after seeing mine. 735737
Great! Fits 2 Rad Mini bikes ( with XXT long tie downs ). Stable and easy !! 732126
Came well packaged. Fit back of my odyssey with a 2 inch hitch. Held my two Rad City step throughs very well. A little awkward mounting the bikes with the petals interfering but that’s on me. So far very impressed with unit. Easy to detach from car so will probably just throw it in the back of the van while biking. 729318
The Thule Easy Fold E-Bike Rack was an excellent purchase. Installs on the car quickly and the bikes are installed in a few minutes. Removing the bikes and the rack goes quickly. I carry two Specialized Como bikes on the rack with no problems. 728191
The Thule Easy Fold bike rack came on time. It was easy to set up and put on our truck though it is a bit heavy. I was delighted to see they had thought to put wheels on the bottom for moving without having to carry it to the vehicle and no rattling when driving! Very sturdy and folds nicely away. It can be tricky to take off the hitch and requires a bit of lifting to loosen and slide out. The bike ramp is difficult to get to and we found it was just easier to just lift our bikes onto the platform. Definitely great for our electric bikes. 728013
The bike rack handles to electric bikes quite well. Very satisfied. 727703
So far, I'm pleased with the EasyFold XT Bike Rack. It's well built, cleverly engineered and easy to use. It came fully assembled and it sets up and stores quickly. This gizmo is going to greatly expand my riding horizons! 727528
Do you have a question about this Hitch Bike Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.