To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The TorkLift SuperHitch Magnum gives you two receiver openings stacked vertically — a 2-1/2" for heavy-duty towing and a 2" for standard gear. That means you can hook up a trailer and still carry a hitch-mounted bike rack or cargo carrier at the same time. The included adapter sleeve converts the top 2-1/2" tube to 2", so you can use your existing 2" accessories without losing capacity. It’s a smart way to make one hitch do the work of two without bulky adapters or extra hardware.
Built for serious hauling, this Class V hitch is rated for a maximum gross trailer weight of 20,000 lbs and 30,000 lbs when used with TorkLift’s Everest weight distribution system?(TLWD1000?– sold separately). Tongue weight tops out at 2,500 lbs or 3,000 lbs with weight distribution. Reinforced steel construction with dual-shield welding and hardened hitch pin holes keep everything solid under load. Safety chain loops are built in, and no welding is required — it bolts on for strength and reliability from day one.
If you run a truck bed camper, the SuperHitch Magnum is already set up for it. The cross tube is pre-drilled to accept TorkLift’s frame-mounted camper tie-downs (sold separately), making it easy to secure your slide-in camper. Add a SuperTruss extension (sold separately) to push the receiver back far enough to clear the camper while maintaining excellent towing capacity — up to 10,000 lbs when paired with a weight distribution system, even at 60" extension lengths. You can tow your trailer and keep your camper mounted without compromise.
The heavy-gauge steel body is finished in black powder coat to stand up to road debris and weather. High-penetration welds add durability, while hardened pin holes resist wear over years of towing. This hitch is built to take daily use, long hauls, and tough conditions without losing performance or looks.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
I took my time and the installation was 90% a one person job. My spouse came out to help me lift the hitch and watch he bed while I jacked it up.
Do not be intimidated by the "removal of truck bed" verbage. You will need to remove the rear four bolts and loosen the front four. I used a 2x4 and a floor jack to lift the bed the 1/4 inch required to slide the hitch into the frame.
Great to deal with , got my hitch in 2 days !
One of Box was broken open
High-quality US made well worth the money do you want heavy duty this is it.
Very cool. Installation instruction should be posted on the internet for convenience
Heavy duty, good quality.
Richard
2/11/2024
After a year still works great it extends out far enough for when I have my truck camper on my trucks, I can also pull my boat or trailer my side by side I can make a sharp curve and not worry about hitting my camper.
This works well, Very strong. It cost too much, but when you need to pull a trailer with an extended hitch you have to have it to be safe.
Torklift makes the best truck camper accessories period! Best value for the best price.
Good as advertised and the hitch quality is not in question, however, Lots of hardware issues. I had to purchase my own hardware for the missing and incorrect quantities of washers, bolts, and star washers. It's obvious they transposed quantities such as; the parts inventory shows 6ea 5/8" star washers however only 2 were provided. But they provided 6ea 3/4" star washers. Same issue with lock washers and bolts. And yes, I bought grade 8 replacement bolts/hardware per parts list. A long bed application does not explain hardware mismatches.
The box it shipped in was completely destroyed.
Again the hitch is built fantastic and fits great per easy to follow instructions.
If you want the best tool for the job and versatile this is the Hitch Our 3rd diesel with this setup up combo with Lance camper towing jeeps, boats trailers. solid!!!
Box was torn open in a few places but I didn’t see any damage or missing items. Great job! Thanks
Powder coating is terrible. Rusting within months. Wash vehicle at least weekly, did not matter. When call etrailer, they just responded paint it.
Jenny N.
3/3/2022
After the hitches are installed on a vehicle over time road debris will cause nicks and scratches to the hitch which will cause rust. We recommend touching up the affected places on the hitch with a rust resistant paint. This will help to prevent rust and also you will have it on hand for regular hitch maintenance.
Helpful Links
Robert
2/25/2023
Still a terrible finish on the hitch. Should have a good powder coating for the price of this setup.
Fit perfectly. Instructions were good. Well-built and very solid.
Excellent installation instructions. The only installation issue which I had was one bolt which had damaged threads. I had to clean up the threads with a triangular file in order to thread the bolt into the matching nut. Once installed, I discovered that the 2 1/2" receiver did not fit the B&W Tow & Stow 3-ball mount #BWTS20067BMP which I had purchased. The hitch pin holes would not line up.
Overall, I am very pleased with the receiver. In terms of the condition in which I received it, I was not happy. Either it was shipped in the condition I received it or it was handled extremely roughly by the time I got it. I found the cross tube had a bent flange. The hardware box was destroyed, and the hardware bag was open. There were hardware pieces floating around inside the box and about half a dozen washers and nuts missing. Fortunately, I was able to source those locally. The instructions are a little misleading as I found that where 5/8 inch hardware is called for it required the use of the half-inch hardware. And all it was a pretty easy installation if you have the tools and the time and the space.
Great product directions were great installed with a friend in a little over 2 hours. We did use a lift
eTrailer was perfect. It was not bad to install and works as expected. TorkLift included some wrong size fish wire for installing the bolts. I worked around that with some fine wire I had on hand. All in all I am pleased with the results.
looks great! perfect fit, works great, strong parts, works perfect!
Great product, but very long to instal
Product was excellent and did exactly what we needed. Customer service was not so great.
Follow each step in instructions and it goes flawless. A very over built hitch. It will do the job, bolt locator wires come in bolt box don’t buy any.
This thing is awesome. Pull my slide in camper and my 20’ trailer. Be sure to retorque the bolts after first use. Buy the b and w stabilizing hitch too. Awesome setup. Easy install
How TorkLift figures out to how make things work is amazing. Instructions were as clear as day, up until the metal pieces with slots. These pieces go inside the truck frame next to the TorkLift Big L shaped metal arms. This is a tight fit and We had to us a flat chisel and hammer to get them tapped into place. Take your time with this step. etrailer usually has an install video but unfortunately, not for this particular install. I was originally skeptical that the bolts and star washer would spin inside the frame when tightening the nuts from the outside. Everything went together perfectly.
Victoria H.
4/8/2025
Thanks for sharing your insight Ted! It's great the instructions were clear, that can be rare these days. Happy to hear you were able to make this fit your needs Ted!
Ted
4/8/2026
After the installation a year ago, I have had no issues. Great product
Claire H.
4/8/2026
Overall install went smooth- definitely a heavy duty hitch, HOWEVER, I ran into a scenario where my application (using a 3ft extension connected to a trailer toad, then to a 10k lb trailer). This combo puts a lot of side load on the hitch and support chains, especially while backing up. Result was the 8 3/8 side/end bolts working loose. I was on the verge of losing the entire load driving down the road, but fortunately found the issue. I have upgraded those qty 8 bolts to a 7/16 fine thread grade 8 using lock nuts and loctite. Will now monitor those bolts to ensure they do not work loose. Attached pic shows the bolts, including the one completely falling out on the highway.
The installer said that I got a super good deal and the recommended installer was a great recommendation and they didn’t over charge like Curtis Trailer of Beaverton Oregon. Tualatin truck &Accessories, I highly recommend them.
Lazer S.
3/3/2026
Glad we could help out, Mahn! Are you going to be using this with a truck bed camper? That tends to be what most use this hitch with, but not all.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ricky
10/16/2023
Great