Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1980 Buick Skylark
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
Part Number: TL49YR
In Stock
$1,125.29
1980 Buick Skylark
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (12)
- Q & A (0)
- Photos
TorkLift Trailer Hitch - TL49YR
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- Haul up to 30,000 lbs (WD GTW): Dual receivers let you tow heavy trailers and still use hitch-mounted gear.
- Carry More at Once: 2-1/2" and 2" receivers stack vertically so you can tow and mount a bike rack or cargo carrier together.
- Handles Up to 3,000 lbs (WD TW): Built for serious weight distribution setups and large towing loads.
- Built for Strength and Longevity: Sturdy steel construction with dual-shield welds and reinforced pin holes resists wear.
- Simplifies Setup: Bolt-on installation with pre-drilled holes—no welding required.
Features to know about
Haul Heavy and Carry More Gear: Dual 2-1/2" and 2" Receivers
When you need to tow a trailer and still bring along your bikes or cargo carrier, the SuperHitch Magnum makes it possible. Its dual, vertically stacked receivers include a 2-1/2" opening for heavy-duty towing and a 2" opening for standard towing accessories. The included 2" adapter sleeve lets you swap between setups easily, so you can haul your trailer and mount a rack or basket at the same time without giving up strength or safety.
Serious Towing Power for Demanding Loads: Class V Strength
This hitch is built for high-capacity towing with solid steel construction and dual-shield welds that stand up to stress and weight. It’s rated for a maximum 20,000 lbs gross trailer weight and 2,500 lbs tongue weight, or up to 30,000 lbs GTW and 3,000 lbs TW when paired with TorkLift’s weight distribution system (sold separately). Reinforced hitch pin holes resist elongation over time, keeping your connection tight even after repeated use.
Built Tough for Truck Camper Setups: Pre-Drilled Mounting and Expansion Options
The SuperHitch Magnum is ready for serious truck camper setups thanks to pre-drilled mounting points that fit TorkLift camper tie-downs (sold separately). It works seamlessly with the SuperTruss extension system (sold separately) so you can extend the hitch receiver out to clear your camper while maintaining impressive towing capacity. This setup gives you the reach you need without sacrificing hauling performance.
Corrosion-Resistant Finish and Easy Bolt-On Install
A black powder coat finish helps protect against rust, dirt, and road wear so the hitch stays strong through years of use. The bolt-on installation means no welding is required—just line it up, secure it in place, and you’re ready to tow. Safety chain loops and two hitch pins with clips are included for convenience right out of the box.
Specs
Receiver Dimensions
- Top receiver opening: 2-1/2" x 2-1/2"
- 2" x 2" Adapter sleeve included
- Bottom receiver opening: 2" x 2"
Weight and Capacity
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 30,000 lbs
- Maximum tongue weight: 2,500 lbs
- Maximum TW when used with weight distribution: 3,000 lbs
Dimensions
- Cross tube dimensions: 4" x 4"
Warranty
- Lifetime warranty
D1110-30 Tork Lift Magnum Super Hitch with 2 Receivers - 30,000 lbs
This Product Fits The Following Vehicles
Customer Satisfaction Score:
69% were satisfied with this product
31% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- etrailer mistake
Ratings & Reviews
4.6
12 reviews
by:
Robert
03/25/2025
I want to be able to pull my boat with the camper on. It works great.
Robert
3/26/2026
It works great and have had some great trips with it.
by:
Michael
03/20/2026
2022
Ram
5500
The install was tough with the bed already installed but doable. The thing has amazing strength. Would definitely use other products of theirs.
by:
Kevin
03/19/2026
It's a well made product and meets all my needs for towing.
by:
Terry
03/14/2023
TorkLift make high quality dependable products. This is my second SuperHitch, and the first one I've installed myself. The instructions were spot on every step of the way. It's a beast for sure, but actually pretty easy to install.
Terry
3/15/2024
I have not used this one yet! But the experience I had with my previous SuperHitch and the super truss were perfect. I highly recommend this setup for heavy trailers or when an extension is necessary.
by:
Tom
07/31/2026
I received the hitch but the plastic hardware bag was broken and the hardware (nuts, washers, bolts) were scattered inside the box. What worries me is the box was also torn in a spot, so I don't know if all the hardware is even there. Very disappointed with the packaging. UPS was the shipper, so they may have damaged the package during shipping? I will start the install this weekend, hoping that all the hardware is somewhere inside the box.
Mike L.
8/2/2026
I'm sorry that happened Tom. If anything's missing please let me know.
by:
Mark
04/26/2023
2022
Ram
3500
This hitch receiver is a beast! Extremely well built. I mounted to my Ram 3500 Chassis Cab in less than 2 hours. All of the bolt holes and bolts matched perfectly. No drilling or cutting. I am 63 and installed it by myself. I used a tie down to hold one end and a shop bench to prop the cross member in place. Best if you have a helper for lifting and positioning the cross member but one person can do it.
by:
Osmay
05/02/2025
by:
Brett
09/03/2026
by:
Jeff
09/03/2026
2026
Ram
5500
by:
Brian
01/25/2023
by:
Steve
07/11/2024
2018
Ram
3500
by:
Brad
07/11/2024
12
12
true
See what our Experts say about this TorkLift Trailer Hitch
- Extension for 2026 Ram 5500 With Truck Bed Camper Towing BoatHey Jeff! The TorkLift SuperTruss Hitch Extension like # TLE1542 is only designed to work with the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TL49YR. You won't be able to use it with your existing 2-1/2" receiver on the flatbed. What you can use instead is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches # RP45018. You will cut it down to the 41" length which will give you a max gross trailer weight of 5,000 lbs. You can also use the TorkLift Wiring Harness Extension...
view full answer... - TorkLift SuperHitch Magnum TL49YR The Same As D1110-30Hey Kevin, welcome back! Yes, the TorkLift SuperHitch Magnum Trailer Hitch # TL49YR is the same as the TorkLift part number D1110-30. This hitch can be delivered to residential areas. What will you be using it for?
view full answer... - High Capacity Trailer Hitch that Fits 2024 Ram 3500Hey George, I checked with Torlift and at this time they do not have any hitches that fit the rear of your 2025 Ram 3500 but we do have the Curt part # C15801 which is our highest rated hitch that fits your vehicle as it is rated to tow up t a 20,000 lb trailer.
view full answer... - Recommended TorkLift SuperHitch for a 2018 Ram 3500 Cab and Chassis Yes, it is! The TorkLift SuperHitch Magnum Trailer Hitch item # TL49YR has been confirmed to fit the Cab and Chassis models of the 2018 Ram 3500. This hitch comes with both a 2" and a 2-1/2" receiver. It has a 20,000 lbs towing capacity that can be increased to a massive 30,000 lbs when you use the Everest Weight Distribution System item # TLWD1000 and item # TLM9010.
view full answer... - 2024 Ram 5500 Cab and Chassis 2-1/2" Trailer Hitch Receiver OptionsWe have 2 different 2-1/2" hitch receiver options for your 2024 Ram 5500 Cab and Chassis and the correct one just depends on what you're looking to get out of the hitch. The Curt # C15800 is your classic hitch receiver while the TorkLift # TL49YR is a dual stacked receiver that gives you both a 2" and a 2-1/2" receiver. I recommend going with the Curt unless you're going to be towing a trailer and needing to carry a bike rack, or use an in-bed camper and need a special hitch extender...
view full answer... - Torklift Hitch that Fits 2018 Ram 3500 Dually Long BedFor your 2018 Ram 3500 dually long bed we have the Torklift hitch part # TLD1108 that is a confirmed fit and would work great.
view full answer... - Correct TorkLift Trailer Hitch For 2022 Ram 4500 Cab & ChassisI checked with TorkLift for you, and they do have a hitch that fits a 2022 Ram 4500 cab and chassis, with the correct fit being the following: - TorkLift SuperHitch Magnum Trailer Hitch Receiver # TL49YR Then, because of the overhang you mentioned, you do need the SuperTruss extension, the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 42" Long # TLE1542.
view full answer... - How Much Does the TorkLift # TL49YR Weigh?The TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TL49YR weights 157 pounds. It also comes with 2 included hitch pins and is 100% made in the U.S.A. The beautiful thing about this hitch is that you can receive the maximum usable weight capacity of 30,000 pounds with the TorkLift weight distribution system # TLWD1000. In order to use the weight distribution system, I recommend the Adjustable Shank for TorkLift SuperHitch Everest Weight Distribution...
view full answer... - Recommended High Capacity Hitch and Dual Ball Mount for a 2003 Bluebird BusI have a solution for adding a heavy duty hitch to your 2003 Bluebird bus but there aren't any TorkLift SuperHitches that will work because they are all custom fit. You will need to go with a universal option and the one I recommend is the Curt Class 5 Universal Weld-on Hitch w/ Brackets item # 15903. This is a class V hitch with a 2" receiver. It has a 15,000 lbs towing capacity and a 1,500 lbs maximum tongue weight. This hitch must be welded on. There is no way to bolt it to your bus...
view full answer... - Recommended Hitch for a 2023 Ram 5500I have a couple of options for hitches for your 2023 Ram 5500 depending on whether or not you want a 2" receiver or a 2-1/2" receiver. I have listed both options below: 2" Hitch - Curt Trailer Hitch Receiver item # C15400 2-1/2" Hitch - Curt Trailer Hitch Receiver item # C15800 If you are wanting a hitch that has both a 2" and a 2-1/2" receiver then you will need the TorkLift SuperHitch Original Trailer Hitch Receiver item # TL49YR.
view full answer... - Tie Down Extensions for TorkLift SuperHitch Magnum on 2020 Ram 3500It sounds like you're looking for the TorkLift Camper Anchor Relocation Kit # TLA7004. These bolt onto your truck-bed camper to relocate the anchor points if the distance between the front bumper of your camper and the center of the rear anchor point is less than 90". If you don't already have the hitch, the # TL49YR is the correct fit for the 2020 Ram 3500 Cab and Chassis. If you have the 6-1/2' or 8' bed model with the factory hitch then you need the # TLD1111-30 instead.
view full answer... - Heavy Duty Trailer Hitch Receiver For a 2020 Chevrolet Silverado 4500The TorkLift SuperHitch Magnum Trailer Hitch Receiver # TL49YR is for a 2017-2024 Ram 3500-5500 cab and chassis. It does not appear that TorkLift has a receiver for the 2020 Chevrolet Silverado 4500 at this time. If you have a 34" wide frame on your Silverado we do have the Buyers Products Flatbed Bumper Hitch Plate # 3371809055 but it will require you to drill mounting holes into your frame. This is our only alternative for your Silverado 4500 at this time.
view full answer... - 2 inch Hitch Adapter to Fit 2-1/2 inch Torklift Magnum HitchTorklift does have a 2 inch hitch adapter that fits 2-1/2 inch hitches with the part # TLM9006 which was designed to fit Torklift Magnum hitches. They do not offer a ball mount that uses both hitch openings if that's what you were asking.
view full answer... - Torklift SuperHitch Magnum for 2026 Ram 4500 Cab and Chassis for Use with Torklift Hitch ExtenderHey Tom, the Torklift hitch part # TL49YR that you referenced is a confirmed fit for your 2026 Ram 4500 cab and chassis and also will work great with your Torklift SuperTruss as this is the type of hitch your extender was designed to fit so this would for sure be the hitch to go with. For flat bed trucks we have shorter Torklift turnbuckles like with the part # TLS9520 which has a reach range of 14 - 21-1/2 inches. Is your car trailer a race car trailer by chance?
view full answer... - What Other Year Ram Trucks Will My 2018 Ram 3500 TorkLift SuperHitch 20K Fit?Hello Mike, Thanks for writing in. Yes, your TorkLift SuperHitch may fit other model years, but we'll want to identify exactly which hitch you have first. The TorkLift SuperHitch Magnum # TL49YR you're looking at is designed to fit the following trucks: -2017 - 2024 Ram 3500 Cab and Chassis -2017 - 2028 Ram 4500 -2017 - 2028 Ram 5500 Now, if your 2018 Ram 3500 dually has a standard pickup bed and the SuperHitch Original 20K, that's a different hitch. TorkLift lists that model for 2013...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Wilson B
Written by:
Mark S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
3/26/2025
I love your boat, Robert! What kind of fishing do you do?