Lock Recommendation for Roadmaster Anti-Rattle Hitch Extender RM-071-1075

Question

Question:

Is there a locking pin that can be used with the Roadmaster anti-rattle hitch extender? It looks like the perfect solution for me, but Ill need some way to use a locking pin rather than just the simple clip pin for the treaded bolt. Thanks much!

asked by: Tom C

0

Expert Reply:

You could use the Masterlock Padlock set part # ML4683Q to lock the threaded hitch pin of the Roadmaster Anti-Rattle Hitch Extender part # RM-071-1075 that you are interested in. You'd just need to use the lock in place of the cotter pin.

The diameter of the shackle of this is 3/32 inch which would fit easily in the hole on the bolt.

expert reply by: Jameson C

0

Answer 1

The Roadmaster Anti-Rattle Hitch Extender #RM-071-1075 comes with the threaded bolt and pin. This threaded hitch bolt does indeed reduce noise and movement inside the hitch receiver, providing a more secure and quiet connection. However, there is not…

view full answer...

Answer 2

Yes, since the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches #63232 is designed to work with 2" trailer hitches and the Roadmaster Anti-Rattle Hitch Extender for Tow Bars #RM-071-1075 is a 2" hitch accessory, the two will be…

view full answer...

Answer 3

Hey Alan, so the only hitch extender we offer that has the capacity you are wanting is actually 14 inches long and is the Gen-Y part #GY89SR. We don't have any that are 7 inches.

view full answer...

Answer 4

If you are needing to extend the gap between your tow vehicle and trailer, the Roadmaster Anti-Rattle hitch Extender #RM-071-1075 referenced in your question will provide a great solution. This is compatible with any 2 inch hitch receiver and will…

view full answer...

Answer 5

The RockyMounts Hitch Extender LS #RKY10011 will absolutely work for you on your 2018 Toyota 4Runner based on the weights you gave. A hitch adapter, like an extender, reduces the overall capacity of your hitch by 50 percent. Since you mentioned your…

view full answer...

Answer 6

The 20x48 etrailer Off Road Cargo Carrier #e98875 is an excellent choice for off-road and overlanding applications because it lifts your gear 11 inches from the ground, so you can feel confident going over steep and uneven terrain. If your stock…

view full answer...

Answer 7

Hello James, We have a hitch extender for you that'll work to protect your Ford Maverick from making contact with your motorhome, though the MaxxTow Hitch Extender with Step #MT70069 is ill suited for the job. Reason is the total capacity of your…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Rafael, if you wanted to use the Gen-Y Shank for Gen-Y Adjustable Ball Mount #325-GH-505 as a high-low adapter with your Blue Ox Apollo tow bar you certainly can as that's what it was meant for plus it has a 16k towing capacity. What are you…

view full answer...

Lock Recommendation for Roadmaster Anti-Rattle Hitch Extender RM-071-1075

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching