Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).
Features:
Specs:
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Axle showed up in few days, wrapped well. Happy with
Definitely recommend, got it in a few days. Good price
This is a high-quality, reasonably priced axle. It was delivered quickly to my home and installed easily.
Great product. Fast and on time delivery. Thank you.
Good information and specifications. Thank you!
Great part, fit and working perfectly.
Perfect fit less than hour to install
Haven’t had a chance to install these yet but I’m sure they will be satisfactory. Very good sales staff courteous and helpful. Would definitely recommend them and will use them in the future.
Great axel's fit perfectly they was great price and promp delivery would definitely buy from them and I would refer all my friends
the customer service is great
stated order delivered. but only u-bolts and bearings. no axle? delivered next day.
exactly what my trailer needed! thanks!
Never changed an axle before, but everything went fine with these parts. Seems to be holding up to my very limited use.
Installed on a customer's trailer, just replaced it with another from etrailer after the customer bent it.
The threads on one spindle were damaged. One spindle had a rubber cap protecting the spindle threads, but the other side did not. I doubt the damage occurred during shipping since the axle was well wrapped. I was able to get the spindle nut started (after many attempts) and straighten out the threads. Other than thread issue, the new axle fit perfectly.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.