Replacement For Dexter 8-147 Hub
Updated 04/10/2023 | Published 04/08/2023
Products Featured in This Question
Question:
Does Dexter part # 8-247-50 replaces Dexter 8-147? I know the lug pattern is old style on 8-147 and needs special wheel rims, that is the I want to replace it.
asked by: Mir J
Helpful Expert Reply:
The # 8-247-50 matches the capacity, but it uses the modern bearing configuration with # L44649 outer and # L68149 inner bearings. The 8-147 uses a # LM48548 inner bearing which means these hubs will not fit your spindle. The best solution is to replace your current axle. We have the following 3,500 lb axle lengths available:
-Trailer Axle Beam with Easy Grease Spindles - 89" Long # e38GR
-Trailer Axle Beam with Easy Grease Spindles - 95" Long # e68GR
You want to choose a replacement axle based on the hub face to hub face measurement, which is the length. If you have a different spring seat measurement you can cut off the existing spring seats and weld on # TRSS238 to match what you currently have. Both of these axles would allow you to use the # 8-247-50.
If your axle length doesn't match one of those listed above and you can't find a replacement, you may need to use the Timbren Axle-Less Trailer Suspension # A35RS545E. This fits any trailer width and comes with the hubs and brakes.
I have attached some review and installation videos below, along with a video on how to measure your axle for your reference.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dexter trailer bearings races seals caps
- Search Results: shackle straps
- Search Results: axle dust caps
- Search Results: bearing lm48548 trailer bearings races seals caps
- Shop: Lippert Standard Dust Cap - 1.99" Diameter - Qty 2
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Bearings and Seal for Dexter Hub 8-147
- Video: Dexter Trailer Suspension Kit Replacement Shackle Link with Bolts Review
- Q&A: Replacement Bearings, Races and Grease Seal for Dexter 8-147 3500lb Axle
- Q&A: What Races Does Dexter Trailer Hub 8-147 Use
- Q&A: Recommended 3500 lb Axle with Electric Brake Hubs to Replace Axle with 8-147 Drum Hubs
- Shop: Replacement Trailer Wheel Bearing - LM48548 - Qty 1
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Shop: Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Timken LM48510 Replacement Race for Bearings LM48548, LM48548A, and More - Qty 1
- Video: Dexstar Vintage Steel Wheel w/ +5 mm Offset Spec Review
- Q&A: Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 Hubs
- Shop: Brake Controller
- Q&A: Replacement Brake & Hub Assemblies for Dexter 8-147 Hubs
- Q&A: Replacement Hub/Drum Assembly Needed for a Dexter 8-147 Assembly
- Search Results: trailer brake connector
- Search Results: brake controller plug
- Search Results: trailer brake controller
- Shop: Trailer Wiring
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
