Solution for Replacement Hub For Spindle With LM67048/LM11949 Bearing Combination

Updated 08/15/2022 | Published 08/11/2022

Products Featured in This Question

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased

(1510)

$50.25

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

(13)

$99.84

Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs

(263)

$376.31

Replacement Trailer Hub Bearing - LM11949

(2189)

$6.28

Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter

(657)

$16.35

Question:

I had a wheel bearing go on my trailer and it messed the hub up so I am in search of a new one, although I am having trouble identifying it. It is a 5 on 4.75 bolt pattern, LM67048 - LM67010 inner bearing and cup, 09067 - 09195 outer bearing and cup with a 18543 seal. Thanks

asked by: Ryan

Expert Reply:

The 09067 bearing has an inner diameter of .75" just like the # LM11949. The only option we have that would fit is the # AH15450ECOMP which is an agricultural hub with a 4 on 5 bolt pattern. This bearing combination is old and very uncommon anymore so regular replacement hubs are no longer manufactured.

The best solution is to replace your axle with one that uses standard bearings. This would allow you to add hubs that match your 5 on 4-3/4 bolt pattern like the # AKIHUB-5475-35-K. To find a replacement axle you will need the axle capacity as well as the length and spring seat measurement. The length is the hub face to hub face measurement.

For example, if you found that you have a 3,500 lb axle that measures 95" long with a spring seat measurement of 80" you could use the # e68GR. It is nice if the spring seat measurement matches, but long as the length matches you can use the axle since the spring seats can be removed and # TRSS238 could be welded on where you need them.