Solution for Replacement Hubs Using Obsolete 2585 Inner and 1380 Outer Bearing Combination
Updated 05/23/2023 | Published 05/21/2023
Products Featured in This Question
Question:
looking for new hubs to reaplace the old style ones inner bearing is a 2585 and outer is 1380 thanks
asked by: Matthew G
Expert Reply:
It looks like that bearing combination was used on 1940's and 1950's trailers. Unfortunately, it is now obsolete with no hubs available. Your best bet would be to replace the axle with spindles using a modern bearing combination.
In order to find the right replacement axle you will need to know the axle capacity as well as the length of the axle. The length is the hub face to hub face measurement as shown in the diagram below. For example, if your axle measured 95" and had a 3,500 lb capacity you could use the # e68GR. Then you could choose replacement hubs with the bolt pattern that match what you have now.
I have attached a link to all of our replacement axles which can be filtered by length and capacity for your reference.
(click to enlarge)
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 2585
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.31 Inch I.D.
- Bearing 2585
- Race 2520
- 9000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: scissor jack
- Search Results: k71~995~00
- Search Results: pmhd14202
- Video: Review of etrailer Camper Jacks - Scissor Stabilizer Jacks Qty 4 - e74RV
- Shop: Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver - 20K
- Shop: B&W Pintle Hook Mounting Plate for 2-1/2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
- Shop: Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Shop: Replacement Trailer Hub Bearing - 2585
- Search Results: 72~80
- Search Results: tjd~12000
- Search Results: 2585
- Search Results: safety chains
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Shop: Ultra-Fab Ultra Scissor Jacks - 30" Lift - 13,000 lbs - Qty 2
- Shop: etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 30,000 lbs - Qty 4
- Shop: Replacement Trailer Hub Bearing - L68149
- Q&A: Are Trailer Wheel Bolts Left-Handed
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Q&A: Hubs and Electric Brake Assemblies for M1010A2 Military Trailer
- Q&A: Parts Needed To Swap Out The Axle On A 1991 M101A2 Military Trailer
- Shop: Vehicle Tow Bar Brake System
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Can Trailer Air Brakes Work with an Electric Brake Controller
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Hubs that Fit Bearings 2585 and 3180
- Shop: Towing Mirrors
- Article: Trailer Wiring Diagrams
- Video: Ultimate Overview of the DeeMaxx Brake Cable Adjuster for Mechanical Brakes
- Video: An In-Depth Look at the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Video: Checking Out the Timken Replacement Trailer Wheel Bearing