Replacement for 94" Long 3,500 Pound Lippert Axle
Updated 04/18/2022 | Published 04/15/2022
Products Featured in This Question
Question:
Im looking for this axle to make my trailer a tandem axle trailer this is the axle that is under the trailer now LC135-SI-94-81-NOSP-US-L-550-7242 V000113565
asked by: Eric L
Expert Reply:
It looks like your current axle is a 3,500 lb axle that measures 94" hub face to hub face with an 81" spring seat measurement. Although we do not have a 94" axle, you can use the Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs # e68GR which will stick out 1/2" farther on either side but not cause an issue. This axle will also work with the # AKHD-545-35-EZ-K you looked at.
One thing you will need to do is cut off the spring seats and weld on new ones like the # TRSS238 to match the 81" measurement on your other axle. You will also need a hanger kit like the Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear # APT5 and U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts # APUBR-1.
You will also want leaf springs that are the same length and capacity of your current leaf springs. I have included a link to our available 3,500 lb double-eye leaf springs below. I have also attached some helpful articles on trailer suspension and axle placement for your reference.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 12k jack
- Shop: Brake Controller
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Square Direct Weld Trailer Jack - Drop Leg w/ Spring - Sidewind - 15" Lift - 12,000 lbs
- Search Results: equalizer kit
- Shop: Tradesman 7K Hydraulic A-Frame Trailer Jack w/ 17" Connection for Bumper Pull Dump Trailers
- Shop: Hydraulic Dump Trailer Upgrade Kit for Atlas IV Single-Acting Trailer Jack - 60" Hose
- Shop: Stillwell NeXgen Cube Hydraulic Manifold - Dual Flow Divider/Combiner with Dual PO Check Valves
- Shop: Tradesman 7K Hydraulic A-Frame Trailer Jack w/ 32" Connection for Bumper Pull Dump Trailers
- Shop: etrailer Square Sidewind Trailer Jack - Foot Release Drop Leg - 13-1/2" Lift - 12,000 lbs
- Search Results: trailer brake controller
- Search Results: 7 way plug
- Search Results: trailer hubs and drums
- Search Results: fender lights
- Search Results: drum
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Article: How to Measure for Trailer Hitch Drop
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
on Trailer Hubs and Drums
