Recommended 95" Axle with 80" Spring Center and 5 on 5" Hubs
Updated 08/22/2022 | Published 08/20/2022
Products Featured in This Question
Question:
Looking for a trailer axle assemble with electric brakes less springs. Measurements are: 95 inches hub to hub, 80 Inches spring center to center, 5 on 5 bolt circle
asked by: Richard
Expert Reply:
I do have mostly what you're looking for but you'd need to add the brakes and hubs separately as we don't offer any pre-assembled with this bolt pattern. In regards to the axle, you'll need the Trailer Axle Beam with Easy Grease Spindles part # e68GR then you can add the Electric Trailer Brake Kit part # AKEBRK-35-SA and Easy Grease Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K.
Don't forget to check out the review video I did on the Trailer Axle Beam with Easy Grease Spindles below.
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking For Replacement Bearing For Square Tube Top Wind Trailer Jack
- Q&A: Can I Upgrade 3,500 lb Axles to 5,200 lb Axles on a Budget
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Can Leaf Springs be Moved to Top of Underslung Axle
- Q&A: What is The Difference Between Having Trailer Axles Above or Below the Leaf Springs
- Q&A: Compatibility of 17.5 Rims and Tires To Replace 16 Inch Trailer Wheels
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: How to Choose the Correct Trailer Coupler Repair Kit
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Gooseneck to 5th Wheel Adapters
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)