Comparing 95" Trailer Axle Beam with Easy Grease Spindles and Dexter Trailer Axle Beam with E-Z Lube
Updated 05/20/2023 | Published 05/19/2023 >
Products Featured in This Question
Question:
Hello, Looking to replace a 95 trailer axle beam for a neighbor. Can you tell me if theres a difference between p/n e68GR and 7359765? Is it a brand difference or something else? Thank you
asked by: Mike
Expert Reply:
The Trailer Axle Beam with Easy Grease Spindles part # e68GR is made by Axle Tek and the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765 is made by Dexter. That said, they both have the same specs and features, you'll just save a bit of money with our house brand so that's what I recommend. That said, if you want to stick with the name brand item in Dexter, you won't be disappointed there either.
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Axle Needed for 3,500 lb Dexter Axle
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer breakaway kit
- Shop: Trailer Hitch
- Q&A: 95" Long Axle With 80" Spring Center With Electric Trailer Brakes and a 5 on 4-3/4" Bolt Pattern
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: dexter 3500 lb axle
- Q&A: Can Brakes Be Added To An Enclosed Trailer With A 3,500lb Axle
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: How To Determine Is Spindle Is Bent On My Torsion Axle
- Q&A: Recommended Replacement 3,500 lb Axle for an AL-KO Axle
- Search Results: bumpstop
- Search Results: over under
- Search Results: trailer bump stop
- Search Results: wheel
- Search Results: trailer wheel
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Dexstar Steel Spoke Trailer Wheel Spec Review
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Maintenance Schedule
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Should Bump Stops be Added to a Trailer when Using and Over/Under Conversion Kit
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Lift a 2020 Montana High County 5th Wheel Trailer

