Trailer Lights - Peterson

Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.

8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug

This 17' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. 300 Diodes produce a bright white light. Cut-to-fit installation with peel-and-stick adhesive backing. Hardwires to any 12V power source.

7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.

8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug.

16" x 1-5/16" x 11/16". Low-profile LED trailer tail light serves as a stop, turn, and tail light for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.

5-1/16" x 4-9/16" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.

150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 6" Silver/6" red pattern, perforated.

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

...0.046 amps Lifetime warranty on LEDs Manufacturer Cross Reference: Light will work as an exact replacement for: Uni bond # LED2238-13R Grote # 53962 Peterson # M420R-2 What Wiring Do I Need? This light...

6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Mounts on surface of trailer - hardware included. 3-Wire pigtail.

7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.

Waterproof clearance/marker light can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with durable ABS plastic base. 2-Wire pigtail. P2 rated.

7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.

10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 5-Wire pigtail. 14 Diodes.

7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.

2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.

18" x 5-3/4" x 1". Low-profile dome light illuminates an RV's interior with bright white light. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. Accepts 2-Wire pigtail.

10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 4-Wire pigtail. 14 Diodes.

18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Designed for refrigerated trucks and trailers. Durable polycarbonate housing and lens. Surface mount. 2-Wire pigtail. 10 Diodes

Compact, surface-mount oval marker/clearance light with bezel. Hard-wired, non-polarized 2-wire hookup (both leads are red) with 0.180" male bullet connectors. Durable polycarbonate construction.

8-11/16" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's easy to replace the bulb. It wires to your RV.