bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side

Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side

Item # RVSTLB60
Our Price: $41.24
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.55 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail. Great Prices for the best trailer lights from Optronics. Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side part number RVSTLB60 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (142)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - RVSTLB60

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 8-11/16L x 3-3/16W Inch
  • Surface Mount
  • Rear Reflector
  • Stop/Turn/Tail
  • Non-Submersible Lights
  • Optronics

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail.


  • Low-profile RV tail light serves 3 functions
    • Stop, turn, and tail light
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable black ABS plastic base and snap-on lens
  • Red lens over white LEDs
  • Compatible with 12V DC systems
  • Mounts on surface of trailer - hardware not included
  • 3-Wire pigtail
    • White wire for ground
    • Black wire for tail light
    • Green wire for stop/turn signal light
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting


  • Configuration: passenger side
    • Driver side: RVSTLB61 (sold separately)
  • Light dimensions: 8-11/16" long x 3-3/16" tall x 2-1/8" deep
  • Diodes: 9
  • Power draw at 12.8V:
    • Stop/turn: 0.243 amps
    • Tail: 0.046 amps
  • Lifetime warranty on LEDs

Optronics RVSTL60 Series RV combination tail light Dimensions

RVSTLB60 Optronics Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Red Lens - Passenger Side - Right Hand

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side - RVSTLB60

Average Customer Rating:  4.8 out of 5 stars   (142 Customer Reviews)

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail.


Well built, easy installation. Nice LED upgrade to my trailer


Installed about 1 year ago, still working fine. These were an exact match replacement for my older taillights. I like the LED and no longer need to replace bulbs.


Easy replacement.


Fast service. I called to get more information on which taillight to order and customer service answered my phone call right away and answered my question! I have used etrailer before for parts and will continue using them.


so far, working great



Still working great


The L.E.D. taillights were delivered quickly and work perfectly.


Much brighter and easier to see than standard bulb lights. Direct replacement for my original taillights.


Service was great Product info was accurate. Thank you for your quick response.


The lights were very easy to install, and the LED lights were exactly what I was looking for to provide the bright light.


Look just like my original incandescent lights, but brighter. Very easy install. Just be gentle snapping the lenses on.


They work very well.


Its a great tail light with the exception of the locking tabs to keep the lens attached are weak. Due to these weak tabs I have used a adhesive tape around the perimeter of the lens seal to assure the lens doesn't fall off


I bought these LED taillights to replace a set of incandecent style taillights that were having issues. My 2017 Wildcat was almost entirely running LED style lights both inside and out except for the taillights, so I decided to install LED taillights rather than troubleshoot these original taillights. I did find a problem with the way that the factory had wired my taillights during the process. The factory had the brake/turning signal wiring and taillight wiring reversed, which was not noticable with the incandescent style lights, but was very apparent with the newer LED lights. Once wired correctly these LED taillights really out shine the original taillights and I'm very happy with them in general and would buy them again.

James H.


These tail lights are still working well after a year. My only complaint is I wish they were as big as the ones I removed. The new ones are shorter then my old lights, so two of the older screw holes are now visible. I sealed them with clear RTV sealant, but I still see them. I couldnt find any LED style taillights as big as my older ones.


I replaced all the clearance lights and taillights on our fifth wheel camper with these OE style LED versions. They are much brighter and therefore much safer, especially in the case of the tail/brake/turn lights seen elsewhere at etrailer. They should last a lot longer than the original bulb units. I also like the way they look as compared to the old bulb style. Our camper was only a year old, and I don't understand why they all wouldn't come from the factory with LEDs. I installed them all myself without issue.

Grant N.


Thank you for your follow up. I am still happy with my purchase,although they are installed on a fifth wheel camper trailer that doesnt getused a lot and usually in the daylight hours, so the lights havent got alot of hours on them. So far, so good. Thanks again.


Ordered a hitch pin and 2 led tail light assemblies. Came in one box Christmas eve, sst hitch pin had 2 layers of padding but the 2 tail lights were loose in the box with no wrapping or packaging. One lens has a chunk broken off and other has a gash across the lens.

Have requested replacements but probably wont hear back until after holidays. Very surprised the tail lights were loose with no label or mounting screws or instructions or blister pack.


The original incandescent bulbs on my 16ft KZ Sportsmen weren't very bright in the South Florida Sun. The new lights were a great match in terms of size, the installation instructions were clear and daytime visibility of turning and braking has greatly improved. No problems with leaking or fading one year after.

Rich F.


Two years later the lights are still functioning properly. No dimming, fading, cracking or leaks despite being stored outside in the South Florida sun.


I purchased these LED taillights as a direct replacement for the stock incandescent fixtures that our 2019 Aliner Ranger 12 came with. I wanted to upgrade to LED for greater visibility and reliability. These were a win on both counts. The best part was that I didn't have to drill any new holes to mount them as the fixture housings are identical.

Keith I.


The lights are still working great! Very happy.


Product worked perfectly. Much brighter than original bulb type, and super easy to install. Don't forget that your trailer wire coloring, and standard wire coloring are not the same. Pay attention to original wiring before you cut replace old light kit.



Still bright and working perfectly. I would suggest to anyone with a new or old rig to update to the LED version.


Easy installation & matches original pr oduct.



Product performing like it did when new.


Very satisfied with this LED for the passenger's side of my 5th wheel. Looks way more finished than original lights were and much much brighter!!!! Thank you again!

Bob S.


Perfect still. Very happy with these products, thanks again!!


I had a wanted to install a quick and easy LED system for my existing fifth wheel halogen taillights. It was a pretty simple task and we love them!



Awesome, much better to see than the OEM halogen lights.


Oh baby, what a huge improvement and upgrade from our original factory 2018 Grand Design Reflection 5th wheel brake & tail lights. These new LED lights are brighter, safer and add a large measure of confidence when I am towing. The swap out project was easy & I used the heat shrink wire connectors for added connection strength & waterproofing. I really think RV manufacturers should all move to the LED lights. They really do make a big difference! Also, check out the LED RV marker lights that etrailer sells. They are a good investment. We are glade we did these LED light upgrades when we did, even though our RV is fairly new. Big safety advantage.


It arrived on time without any damage. It was a direct replacement that was completed without any problems. I would buy again.


Wow! 1st experience and it was great! Exactly what I needed and arrived sooner than expected!


I ordered both driver and passenger side LED tail lights to replace the stock ones which were not working, on my travel trailer. I was sad to see that when they arrived via 2nd day shipping (Wife and I going on vacation the next day)that the drivers side was not LED :( Not wanting to cancel my vacation I installed what I was shipped and emailed etrailer what had occurred. They ended up shipping the right one in several weeks for free. Great customer service . Thanks etrailer

Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Replacement Taillight for Fifth Wheel that Has Raised Center Section
    Hit reply to this with the picture and I'll take a look and see if we have it.
    view full answer...
    Image 1 for
  • Replacement Tail Light and License Plate Bracket for a 2011 Palomino Y-Series Camper
    Unfortunately there is no database with each part number for each year, make and model of trailer that would allow me to look up what you might have. So based off of the information you have provided me, I recommend the Optronics Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side item # RVSTLB61. This light is a 8-11/16" x 3-3/16" rectangle. This low-profile light serves 4 functions: brake, tail, turn, and license plate light. Optronics...
    view full answer...
  • Recommended Replacement Lights For A 2014 Gulf Breeze Ultra Lite 22 TRB With Hail Damage
    It doesn't look like we currently offer the correct lens replacements based on the dimensions you provided and the tail light you have looks like the base would be too broken and would allow water in to replace just the lens so you're looking at a complete replacement for these lights. For the tail lights I recommend the Low Profile LED RV Tail Light w/ License Bracket - Driver's Side # RVSTLB61 and Passenger's Side # RVSTLB60. The clearance lights can be replaced with the Optronics...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Driver And Passenger Side Low Profile LED RV Tail Light
    I can help you out here as we do have both the driver side and passenger Low Profile LED RV Tail Light. The matching passenger side has 9 diodes though because it does not have bulbs to light up the license plate. The two matching lights are the following: - Driver Side: Low Profile LED RV Tail Light with License Bracket # RVSTLB61 - Passenger Side: Low Profile LED RV Tail Light # RVSTLB60
    view full answer...
  • Similar LED Version of Peterson Trailer Taillight # V457
    The closest LED trailer taillight to # V457 is the Optronics part # RVSTLB61 which has a license plate bracket or the part number # RVSTLB60 which does not.
    view full answer...
  • Do SAE Numbers Indicate Tail Light Lens Replacement for RVSTLB60
    That's a good question but the SAE number on a light just stands for "Society of Automotive Engineers" and isn't indicative of the exact part. It just means that it has passed their guidelines. The correct replacement lens for the Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side # RVSTLB60 is Replacement Lens # AST60B. Replacement lenses are specific to the light so if you aren't sure what you have you may want to replace the light altogether,...
    view full answer...
  • Replacement Lens for Optronics Tail Light RVSTLB60
    Yes you can purchase the lens by itself of the Low Profile LED RV Tail Light - Stop, Tail, Turn - Black Base - Passenger Side # RVSTLB60. The part you need is the Replacement Lens # AST60B.
    view full answer...
  • Replacement Tail Light Assembly for 2013 WildcatMaxx TT
    Thank you for the photo and information! It looks like you have the Low Profile LED tail light from Optronics as well as their standard boxed combination trailer tail light. We have both the driver and passenger side lights and the only difference is the driver side lights have a clear lens and extra light underneath (and a bracket for the low profile) to illuminate a license plate. Low Profile Driver Side - # RVSTL61 Passenger Side - # RVSTLB60 Combination Driver Side - # STL15RB Passenger...
    view full answer...
    Image 1 for
  • What Is Difference In Wiring For Replacement Lights On Trailer
    The wiring on any lights you put on your trailer depends on the functions you are using the lights for. It sounds like you are wanting to replace the clearance or marker lights on your trailer. If you have one wire, it will be attached to the running light wiring and the light will be grounded through the mounting hardware. If you have 2 wires, it will typically be attached to the running light circuit and the second wire will be a ground. and attached to any clean bare metal surface....
    view full answer...
  • Is Resistor Needed to Install Low Profile RV Tail Light RVSTLB60 and Prevent Hyperflashing
    The part # RVSTLB60 does not have resistors built into it so you would need to provide them if you wanted to prevent hyperflashing. For that we have the # DI34ZR which is a pair of them.
    view full answer...
  • Replacement Lens for SCHOOLCRAFT MI. NO. 003-81 Tail Lights
    I looked through all of the replacement lenses that we have and none are a match for what you are looking for. I wish I had better news for you.
    view full answer...
  • Compatibility Of Optronics LED Low Profile Tail Light On Drivers Side Without License Plate Holder
    Yes, the Low Profile LED RV Tail Light # RVSTLB60 is all you will need on the drivers side of your 2012 Forest River Rockwood travel trailer since the license plate has been relocated. The only difference to the Low Profile LED RV Tail Light # RVSTLB61 is the base for holding the license plate and the clear lens at the bottom of the cover for the license plate light. There is no additional wiring used with this light. Be sure that your license plate does have a light on it when operating...
    view full answer...
  • What Is The Lumen Output For The Optronics RVSTLB61 And RVSTLB60
    Hello Berry. The light readings for the # RVSTLB60 are on the tail 701 / 296 and the candela is 7.8. On the stop is 706 / 293 and the candela is 97.4. The light readings for the # RVSTLB61 are on the tail 702 / 287 and the candela is 7.6. On the stop is 708 / 291 and the candela is 96.8. Between the other stop, turn, tail lights in this size there is not really any significant differences in lumen output. I recommend sticking with the optronics lights. They are known to be great quality...
    view full answer...
  • Solution for Needing Replacement Lens for Trailer Taillight SAE AISTO1
    Since the lens you'd need part number AST50B is no longer available you'd need an all new assembly which for that the best option is the part # RVST50 since you'd basically only be using it for just the lens as this is the most cost effective solution we have.
    view full answer...
  • How to Determine Tail Light Replacement for Rockwood Trailer
    Thank you for the photo, and though we have tail lights that will work for you there is unfortunately no database with each part number for each year, make and model of trailer that would allow us to look up what you might have. Instead, you will need to take a measurement to find a matching light although based on your photo we do have one which looks very similar, the LED RV Tail Light w/ License Bracket - Driver Side # RVSTLB61. This light measures 8-11/16" long x 3-3/16" wide x 2-1/8"...
    view full answer...
    Image 1 for
  • Replacement Lens For A 2019 Forest River Salem Cruise Lite Travel Trailer
    That looks an awful lot like the Optronics LED # RVSTLB61 and # RVSTLB60. I am not able to see a specific model number in your picture but it looks extremely similar. We do carry replacement lenses for these # AST61B. It is the same lens for the driver and passenger side. The light itself measures 8-11/16" long x 3-3/16" wide x 2-1/8" deep. If you can measure the existing light that will really help us connect the dots.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Tail Lights for 2019 Palomino Solaire 268BHSK
    Yes, you can use the # TLL160RK on your 2019 Palomino Solaire 268BHSK without having to modify the rear of the trailer. These are surface mount lights so they can sit where the old lights were located. If you want an exact replacement it looks like it originally came with the # RVSTLB61 and # RVSTLB60.
    view full answer...
  • Replacement LED Tail Lights For a 2018 Keystone Avalanche 5TH Wheel Camper
    Based on images I could find of the tail lights used on the 2018 Keystone Avalanche 5th wheel we have the Drivers Side # 328-003-81LBM1 and Passenger Side # 328-003-81BM1 tail lights you can use to replace the factory incandescent tail lights. Each light has 22 LED diodes to function the stop, turn and running lights. The drivers side light will have an incandescent light for the license plate light. If you prefer tail lights with only LED lights the Drivers Side # RVSTLB61 and Passenger...
    view full answer...
  • How To Mount a License Plate On a Haulmark Utility Trailer
    I don't have any information specific to any one particular trailer but what I can tell you is that most license plates are mounted under the driver side tail light. In fact, most driver side tail lights even have a bracket for the license plate as well as a light that points down from the tail light to illuminate the license plate. The Low Profile LED RV Tail Light part # RVSTLB61 for example has the license plate mount and light as mentioned above and can then be paired with the Low Profile...
    view full answer...
  • Optronics Low Profile LED RV Tail Light Wire Gauge
    The Low Profile LED RV Tail Light # RVSTLB60 uses 20 gauge wire.
    view full answer...
  • Recommended LED Trailer Lights to Replace Incandescent Lights
    I may have some replacement LED lights for your trailer but none of the 8-1/2 by 4-1/2 inch lights we carry are LEDs. The Low Profile LED RV Tail Light # RVSTLB61 for the driver's side and # RVSTLB60 for the passenger's side might work for you.
    view full answer...
  • Largest LED Trailer Tail Light with License Frame Light Available
    The largest LED tail lights we have that have the license plate light are # RVSTL61, in white, and # RVSTLB61, in black. They both measure 8-11/16 by 3-3/16 inches. These are both for the driver's side, the corresponding passenger side lights to these two are the # RVSTL60(white) and # RVSTLB60(black). These two are slightly larger than the # RVSTLB0061 which is 8-5/8 by 3-3/16 inches.
    view full answer...
  • How to Determine Correct Replacement LED Tail Lights on 2017 Grand Design Imagine 2600RB
    You can go to LED lights on your 2017 Grand Design Imagine 2600RB, but we don't have any way of knowing what lights are currently on your trailer, so you'll just need to do some measuring to determine what will work. For example, the Low Profile LED RV Tail Light w/ License Bracket - Driver Side # RVSTLB61 and Passenger Side # RVSTLB60 measure 8-11/16" long x 3-3/16" wide x 2-1/8" deep and are surface-mounted lights. If yours are of similar measurements you can use them as replacements....
    view full answer...

< Previous

Do you have a question about this Trailer Light?

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T
Employee Laura H
Written by:
Laura H
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Hayden R
Installed by:
Hayden R
Employee David F
Test Fit:
David F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924