Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 10K GTW, 1K TW
(34 reviews)
Price: $364.14
In Stock
Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 10K GTW, 1K TW
Item # C69JR
Retail:$527.95
Our Price: $364.14
You Save: $163.81
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (34)
- Q & A (0)
- Photos
CURT Weight Distribution Hitch - C69JR
- 900 lbs
- Fits 2 Inch Hitch
- WD With Sway Control
- Allows Backing Up
- CURT
- Electric Brake Compatible
- Surge Brake Compatible
- Some Sway
Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball and adjustable 2" shank included.
Features:
- Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control
- Creates a more level ride for both tow vehicle and trailer
- Integrated 2-point sway control limits side-to-side movement of trailer
- Brackets keep spring bars in place for a rigid system that holds your trailer in line
- Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers
- No lift chains - eliminates unwanted movement of spring bars
- Spring bars work with brackets to transfer tongue weight evenly to the tow vehicle
- Constructed of forged steel
- Secure in system head with easy-to-use snap pins
- No-drill, clamp-on brackets mount directly to your trailer frame
- Desired tilt is easily achieved using pivot point on system head - no more piling on washer after washer
- Black carbide powder coat finish is durable and corrosion resistant
- System includes head assembly, 2" x 2" shank, spring bars, sway control brackets, snap-up handle, hitch ball, pins and clips, and all necessary hardware
Specs:
- Tongue weight: 800 lbs - 1,000 lbs
- Maximum gross towing weight: 10,000 lbs
- Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
- Sway control bracket positioning: minimum of 4" in from end of spring bar
- Maximum trailer frame dimensions:
- Height: 6"
- Width: 4"
- Overall height: 9-1/2"
- Holes are spaced 1-1/4" apart on center
- Maximum drop: 1/2"
- Maximum rise: 6"
- Shank measures:
- 8" From the center of the pin hole to the center of the adjustment holes
- 7-1/4" From the center of the pin hole to the closest edge of the vertical adjustment shank
- 9" From the center of the pin hole to the furthest edge of the vertical adjustment shank
- Ball size: 2-5/16"
- Limited lifetime warranty
| Included w/ System | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
| n/a | n/a |
Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
Selecting a Weight Distribution System
The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.
17601 Curt True Track 2P Weight Distributing Hitch w/ Sway Control - Adjustable Shank - 10K
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Alternate product found
Customer Reviews
Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 10K GTW, 1K TW - C69JR
Average Customer Rating: 4.8 out of 5 stars (34 Customer Reviews)
Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball and adjustable 2" shank included.by: Terry R03/11/2024
The best weight distribution hitch that I have ever purchased. Very easy to mount. No worries about backing up. I have pulled the enclosed trailer in very windy condition’s and trailer had just slightly movement. Highly recommend.
by: Caleb02/07/2024
The hitch has worked great for our toy hauler. I’ve never experienced a failure nor has it been noisy. Setup is a bit tricky to those not having experience with adjustable hitches. The adjustment is nice but can be confusing at first time set up. The bars are easy to latch and create amazing stability on the road, I never feel the trailer behind me even on windy trips. Be sure to double check measurements and torque specs and this hitch will serve you great
by: William08/17/2023
The hitch itself seems well made and should work fine. The directions were an embarrassment to Curt and etrailer. There were no instructions on how to make the different adjustments needed to set up a WDH. The instructions were downright wrong in several areas (talked about WD chains - there are no chains in this design) (Talked about washers to set ball angle - no washers in this design). Clearly translated by someone who does know what a hitch is. No torque values for the important bolts. I know this is a low-cost hitch but a high-quality business like etrailer ought to reconsider carrying this product.
by: Rob T10/04/2023
Absouletly did the trick I pull a 30’ enclosed snowmobile trailer and with the Curt Tru Track she never sways even in high winds
by: Jerry03/28/2024
Bought this hitch to tow my camper with my new 1/2 ton truck. Hitch was a little hard to get adjusted, but that could be i had never done it before. After watching several videos i got it close. I dont think it's perfect, but does its job. Only made 1 trip using it, but it was a 900 mile round trip. Didn't have any problems with sway, and hitch is very quiet when turning. Overall very good purchase hopefully get to use it more in the future.
by: Fernando 12/17/2023
Relatively easy to install and makes a bid difference in the handling and weight distribution.
by: Timothy09/28/2023
Don’t like the sloppy hitch when starting and stopping
Jenny N.
9/28/2023
If the WD shank is feeling loose, then I would recommend an anti-rattle device like part # RM-061 to help tighten it up.
by: Dean 06/06/2023
Doing the installation and setup, then I will give a review after towing my 7000 lb toy hauler. The box came a bit torn, but all of the components and hardware was included. I really like etrailer.com for their fast response anytime that I order from them.
by: Edward01/25/2024
Items were in stock and shipped fast.
by: James 10/07/2023
Much better than the old chain method
by: Darren 10/23/2023
Very stout and very easy to install.!!
by: Steven 06/02/2023
Nice hitch
Should have ball ins talled
by: Joe 09/20/2022
Shipped quickly as stated & arrived in good condition. The instructions made it easy to install. I pulled a 16' cargo trailer over a 1000 miles without any issues & was very stable.
by: Charlie06/20/2022
I installed this unit and used it to tow a 25' Airstream with a new Land Rover Defender 110. It was easy to install and worked perfect (I had to install the hitch ball, which requires a high rated torque wrench). The difference in the drive was immediately noticeable, and I drove all through the mountains this weekend with more confidence than ever. I highly recommend.
by: John 09/11/2022
Super fast delivery and excellent communication. Always a pleasure to do business with etrailer.
by: Jeryn10/02/2023
by: Joe 10/16/2023
by: Wyatt 10/26/2022
Perfect!
by: Marc 12/19/2022
by: Clifford 09/13/2023
by: Triston09/26/2022
by: Jeff 09/05/2022
by: Brandon 08/29/2022
by: Sonya 08/19/2022
by: James 01/19/2023
25
34
Show More Reviews
See what our Experts say about this CURT Weight Distribution Hitch
- Will Curt Weight Distribution System # C69JR Work with 2023 Grand Design 23LDYes, based on the weight of the Grand Design 2023 23LD that I was able to find online the Curt weight distribution system part # C69JR would work great with it.
view full answer... - Recommended Weight Distribution System for a 7,000 lbs Jayco 267BH Travel TrailerThanks for the picture! The Curt TruTrack 2P Weight Distribution System w/ Sway Control item # C69JR will work with your 7,000 lbs Jayco 267BH. The Curt TruTrack has an 800 lbs to 1,000 lbs tongue weight range. The built in sway control will help to keep your trailer in line with your Silverado when you are driving down the highway.
view full answer...
- Can Curt TruTrack Weight Distribution System C69JR Be Used with 2022 Grand Design Imagine XLS 23BHEBased on the weight of the 2022 Grand Design Imagine XLS 23BHE I was able to find online the Curt TruTrack weight distribution system part # C69JR would be a great option. With that said it seems to weigh more than what your truck is rated for so unless you have a second set of higher towing capacities when using a WD system I can't recommend this towing setup of your truck and trailer as safe.
view full answer... - Can I Back Up With Curt Weight Distribution Hitch C69JRYes, the Curt TruTrack 2P Weight Distribution System # C69JR will allow you to back up when installed. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you.
view full answer... - Can Curt TruTrack 2P be Used with 8k TrailerHey Tom, yes the Curt TruTrack weight distribution system part # C69JR that you referenced would work just fine towing a trailer that weighs 8,000 lbs. As long as the tow vehicle has a 2 inch hitch you'd be good.
view full answer... - Will Curt TruTrack 2P Weight Distribution Work With Jayco Eagle Travel TrailerYes, the Curt TruTrack 2P Weight Distribution System w/ Sway Control # C69JR will work with your Jayco Eagle travel trailer. From what I saw the GVWR of this rig was a hair above 7,000 lbs, so the 800 lb - 1,000 lb tongue weight range is perfect for your travel trailer. The # C69JR comes with literally everything you need for set up and will give you both leveling and sway control to make your ride much more enjoyable.
view full answer... - Length of Spring Bars on the Curt TruTrack 2p Weight Distribution System # C69JRI went ahead and confirmed with my contact at Curt that the spring bars on the Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank # C69JR are 35" from end to end. I went ahead and attached a diagram of this measurement for your convenience.
view full answer...
- What Does Curt TruTrack Weight Distribution System Weigh without Spring BarsThe spring bars of the Curt weight distribution system part # C69JR are right at 35 lbs which means the rest of the system weighs 60 lbs.
view full answer... - Can Curt TruTrack 2P C69JR Be Disconnected With Truck at About 45 Degree Angle From Trailer?You'll still be able to disconnect the Curt TruTrack 2P # C69JR from your trailer even though you're not perfectly in a straight line at a 45 degree angle, but you may need to use the trailer jack to take extra tension off the bars to get them to come loose. Since the bars pivot in the head assembly being at an angle won't make a huge deal when it comes to disconnecting the bars.
view full answer... - What Replacement Weight Distribution System do I Need without the Ball/Shank for The # C69JR?If you have a compatible 2-5/16" ball and shank already from your # C69JR, the replacement you need is the Curt TruTrack 2P Weight Distribution System w/ Sway Control - No Shank # C79JR. This comes with everything you need in order to mount the system on your current ball/shank.
view full answer... - Weight Distribution Hitch With 1,000 lb CapacityThere is not; you'd have to go with a new weight distribution hitch with a 1,000 lb capacity such as the Curt MV Weight Distribution System # C17052 or Curt TruTrack 2P Weight Distribution System # C69JR.
view full answer... - What is the Best Thing to Add for Help When Towing with a 2004 Ford F-250 4x4The best thing that you can do to your truck to help improve towing with a heavy trailer or hauling a heavy load would be to add suspension enhancements, the most popular of which are air bags. I recommend air bags because they allow you to get the best possible mix between support and comfort for you exact load. The Firestone Ride-Rite Air Helper Springs part # F2550 which are a fit for a 2004 Ford F-250 4x4 will be a great option. The air bags will also work great with a weight distribution...
view full answer... - Grease For Curt TruTrack Weight DistributionYou will just need a white lithium grease for the Curt TruTrack 2P Weight Distribution System w/ Sway Control # C69JR. The best option will be the LubriMatic Multi-Purpose Lithium Grease # L11316.
view full answer... - Curt Weight Distribution with 8,000 lb Trailer Max that Can be Used with Friction Sway ControlThe Curt MV weight distribution part # C17051 has a tongue weight max of 800 lbs and trailer weight max of 8,000 lbs and has tabs on it's head that allow for it to be used with friction sway control like the # 17200.
view full answer... - Is it Possible For the Frame Brackets On Curt TruTrack 2P To Sag Over Time an Use? Yes, it is possible for the Frame Brackets # C17508 to sag on your Curt TruTrack 2P Weight Distribution System # C69JR. Even the Trunnion Spring Bar # C17536 can begin to warp over time from the weight. While Curt does give this weight distribution a lifetime warranty against manufacturer defect this type of stuff is considered normal wear and tear from being used.
view full answer... - Recommended Weight Distribution System for 10,000 lbs V Nose Car Hauler I have a solution for you but the Curt item # C69JR only has a 1,000 lbs tongue weight capacity. If your car hauler is loaded anywhere near its maximum capacity especially with that short tongue you will be way over 1,000 lbs. Instead I recommend the Curt TruTrack Weight Distribution System w/ Sway Control item # C17501. This system has a 1,000 lbs - 1,500 lbs tongue weight. You will need to measure the length of your Cynergy Car Hauler's tongue to confirm the 35" long trunnion bars...
view full answer... - Is Hitch Ball on Curt TruTrack 2P Weight Distribution System Pre-InstalledYou are correct that the Curt TruTrack 2P Weight Distribution System w/ Sway Control # C69JR comes with a 2-5/16" hitch ball but it is not pre-installed. This is something directly from Curt and while we aren't able to pre-torque hitch balls for weight distribution systems prior to shipping them out, you should be able to rent one from your local auto parts store or have a local shop install the hitch ball for you. For a similar system that does come with the hitch ball pre-installed I...
view full answer... - Comparing Blue Ox 2-Point and Curt TruTrack 2P Weight Distribution Systems for a FR Wolf Pup 17JGGenerally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or not at all. If you want to reverse at an angle you'll need to disengage the spring bars which is pretty simple. That said, the Curt TruTrack 2P Weight Distribution Systems like part # C69JR and Blue Ox 2-Point Weight Distribution Systems like part...
view full answer... - Recommended Weight Distribution Hitch For A 2007 Toyota Tundra Toying A Car Hauler TrailerThe Timbren's you have on your Tundra wouldn't interfere with a weight distribution hitch so they would be worth keeping on and using both to help support your suspension. To find the right weight distribution hitch for your setup we'll need to know the fully loaded tongue weight of the trailer. Each weight distribution hitch is going to have a tongue weight range and it's best to be around the middle of that range so that you have some room to work with. The Curt TruTrack 2P Weight Distribution...
view full answer... - Recommended Weight Distribution Hitch For A 2016 StarCraft AR One 14RB 255 lb Hitch WeightWe can definitely set you up with a weight distribution system to use on your 2016 StarCraft AR One 14RB. This camper has a hitch weight of about 255 lbs, so both the Curt # C69JR and the Blue Ox # BLU65FR will be rated much to high to use with a camper like this. For example the # C69JR is made for campers with a hitch weight between 800-1,000 lbs. Instead I recommend the Blue Ox TrackPro Weight Distribution Hitch # BLU36FR. This is made for campers with a tongue weight between 200 and...
view full answer... - Recommended Weight Distribution System For A 2021 Forest River Cherokee Alpha Wolf Travel TrailerWhen it comes to installing a weight distribution system on your 2021 Forest River Cherokee Alpha Wolf Travel Trailer being as close to the trailer weight is the best. I recommend The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 2-5/16 inch Hitch Ball - 10K GTW # FA94-00-1061. This system has an integrated 2-point sway control that limits side-to-side movement. It has steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers. They have a no-drill,...
view full answer... - Will Curt TruTrack 2P Weight Distribution System Fit Straight Tongue TrailerBy straight trailer hitch I'm assuming you mean the tongue of your trailer is a straight beam/pole tongue. If that is the case then yes, you can use the Curt TruTrack 2P Weight Distribution System # C69JR. The TruTrack is designed to fit an A-frame so you will need an adapter to install it. The Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems # EQ95-01-5950 will allow you to attach the # C69JR to your trailer tongue.
view full answer... - Recommended Weight Distribution Hitch System For a Forest River Cherokee Wolf Pup 16BHSThe Curt TruTrack 2P Weight Distribution System # C69JR is going to be to much hitch for your Forest River Cherokee Wolf Pup 16BHS. Your Wolf Pup should have around 400lbs of tongue weight while this Curt system is rated for a trailer with 800-1,000lbs of tongue weight. I recommend using the Equal-i-zer Weight Distribution System # EQ37060ET as it is a far superior hitch system and is rated for 200-600lbs of tongue weight which puts you right in the middle of the zone. This hitch will include...
view full answer... - What Size Ball Shank Does The Curt # C69JR and Reese # RE44FR Weight Distribution Use? Both the Curt TruTrack 2P Weight Distribution System # C69JR and Reese Pro Round Bar Weight Distribution # RE44FR are going to use a 2-5/16" Ball # C40030 with a 1-1/4" shank. You will want to use the 2" Ball # A-90 to switch to a 2" hitch ball. You are able to back up with the Reese # RE44FR.
view full answer...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Leah S
Updated by:
Wilson B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/22/2023
Based on your review I believe that you may have received the incorrect manual with the Curt weight distribution. I am sending an email with a link to the manual.